Marco
Marco -ryhmän tuotteet

- 12V / 7.5A
- Pumps 20l/h.
- 6mm intake pipe with 30 degrees engine oil

2 liters, 1/2", internal/external thread. Ø 138x274.

Marco UP2/E gear pump
Overview and key features
Electronic pressure control: efficiency and precision
Self-priming design and multi-voltage system support
Safety features: short-circuit and overload protection
Frequently Asked Questions (FAQ) about the Marco UP2/E pump
- What voltage options does the pump have? The Marco UP2/E supports both 12V and 24V voltages, making it compatible with a variety of electrical systems.
- Is it safe to use the pump without separate protective devices? Yes, the pump has built-in short-circuit and overload protection, so no separate fuses are needed.
- Is the pump self-priming? Yes, the Marco UP2/E is self-priming, which means that it can move water even when the water source is below the pump without separate priming.
- Are pipe sizes other than 12 mm suitable for the pump? The pump is specifically designed for 12 mm hoses, but the BSP 3/8' standard of the connectors allows the use of adapters.
- Does the pump need a pressure vessel to operate? No, the electronic pressure control makes a pressure vessel unnecessary, which simplifies the system and saves space.
- Pump capacity: 10 l/min
- Motor power: 90W
- Voltage: 12V/24V
- Pressure: 2 bar
- Recommended fuse size: 7.5 A
- Suitable hose diameter: 12 mm
- Connectors: BSP 3/8'

Marco UP6 electric pump uses and features
The Marco UP6 31L electric pump is a compact and efficient gear pump that is ideal for pumping a variety of liquids. The pump is specially designed for pumping drinking water, diesel fuels, light lubricating oils and anti-icing agents. The Marco UP6 is a self-priming system that can pump liquids from a depth of up to 2 meters, which ensures versatile usability even in the most challenging conditions. The efficiency of this pump is combined with operational reliability: it is made of durable material and equipped with carefully designed technical solutions. Its small size makes it easy to handle and install even in tight spaces. Please note that the Marco UP6 pump must not be used for pumping gasoline or other explosive liquids due to safety risks. The Marco UP6 is designed for long-lasting and reliable use for both professionals and households. It is ideal for boating, agriculture and forestry, and industrial use where fast and efficient liquid transfer is required.
Technical data: capacity, power and voltage
The Marco UP6 pump is available in two voltages: 12V and 24V. In both versions, the pump capacity is an impressive 31 liters per minute, which is ensured by the pump's 180 watt motor power. This power allows for fast and effortless liquid transfer, whether it is water or light oil.
? 12V model:
? Capacity: 31 l/min
? Consumption: 10 A
? Recommended fuse size: 15 A
? 24V model:
? Capacity: 31 l/min
? Consumption: 5 A
? Recommended fuse size: 7.5 A
For both voltage options, the maximum pressure is 29 pascals. The standardization of the pump connections (BSP 1/2') makes it easy to use with various hose connections. The recommended hose diameter is 16 mm, and the pump weighs only 7.1 kg.
Installation instructions and compatible hose connections
Correct installation is crucial for the service life and performance of the Marco UP6 31L electric pump. The pump should be mounted on a solid and level surface depending on the application. It is recommended to use the supplied mounting hardware and ensure that the hose system is securely attached and sealed. The pump has BSP 1/2' connections, making it compatible with most hose systems on the market. The recommended hose diameter is 16 mm, but the product can also be used with other diameters when using adapters. Please note that in order to benefit from the self-priming function, the hose connections must be installed tightly and without leakage. After installation, make sure that the fuse used corresponds to the recommended size (12V: 15 A, 24V: 7.5 A). This protects the pump from possible overload situations. It is important to place the pump in a dry and well-ventilated environment, especially if it is used on boats or in other environments where moisture accumulates.
Frequently Asked Questions (FAQ) Marco UP6
-electric pump
? Can the Marco UP6 electric pump be used to pump gasoline?
No, the Marco UP6 is not suitable for pumping gasoline or other explosive liquids due to the risk of explosion.
? Is the pump self-priming?
Yes, the Marco UP6 is a self-priming pump and can suck liquid from a depth of up to 2 meters.
? What size fuse should be used with the pump? The recommended fuse size for the 12V model is 15A and for the 24V model is 7.5A.
? How should sealing be done on hose connections?
Always use high-quality gaskets or sealing tape on BSP 1/2' connections to prevent leaks.
? What to do if the pump does not start?
Check that the power supply is in good condition, the fuse is intact and that the pump is correctly connected to the electrical source.
Safety instructions: what to consider when using the Marco UP6 electric pump When using the Marco UP6 electric pump, strict safety instructions must be followed to ensure safe and long-lasting use. The first and most important rule is that the pump must not be used to pump petrol, as this poses a serious risk of explosion and fire. Make sure that the electrical connections and hose components are correctly and tightly connected before starting the pump. Do not leave the pump running unattended. The pump should also not be used dry, as this can lead to overheating and damage to the motor. Always place the pump in a dry and protected place, and avoid using it in extreme heat or humidity. Handle the pump's electrical components with care and disconnect the power supply before carrying out maintenance or repair work. To ensure safe use, carefully read the instruction manual supplied with the product before first use.

Compressor horn, 12V, ABS plastic/chrome, volume 108 dB/326 Hz.
- Horn length 390mm
- Weight 1.0kg

Marco UP1-J 28L/min impeller pump 12V
Product specifications and performance
Applications: bilge and greywater pumping
Safety standards: ISO 8846 and ISO 8849
Frequently Asked Questions (FAQ) about the Marco UP1-J pump
- Is the Marco UP1-J intended for pumping salt water? Yes, the pump is suitable for pumping both fresh and salt water.
- How deep can the pump lift water when self-priming? The pump can lift water when self-priming from a depth of 1.5 meters.
- Does the pump have protection against electrical interference? Yes, the built-in EMI suppressor protects the pump against electrical interference. What kind of power supply does the pump need? The Marco UP1-J uses a 12 V power supply.
- What size hose fits the pump? The pump's connections are compatible with 20 mm hoses.
- Does the pump come with an installation kit? No, any installation accessories and accessories must be purchased separately.
- Voltage: 12V
- Consumption: 8 A
- Fuse: 10 A
- Self-inflating: 1.5 m
- Pressure: 1 bar
- Flow rate: 28 l/min
- Hose: 20 mm
- Connections: 3/8” BSP
- Motor power: 150 W
- Weight: 1.8 kg

Complete deck wash pump with pressure control system. The pressure switch is electronic on DP9E and DP12E, DP3 has a mechanical pressure switch. The pump is a self-priming gear pump with Teflon gears and a bronze pump housing. The deck wash kit can be used in both fresh and salt water systems. The kit includes a 10 meter long, stretchable, flexible spiral hose with quick coupling and a flushing nozzle.
- Mechanical pressure switch
- Pump capacity: 12 l/min
- Motor power: 180W
- Voltage: 12V/24V
- Pressure: 4 bar
- Recommended fuse size: 15 A
- Suitable hose diameter: 13 mm
- Connectors: BSP 3/8'
- Weight: 4.84 kg
- DP3, 12 V/10A, 14 l/min 2 bar, mechanical pressure switch.

Marco UP3 electric pump
Marco UP3 electric pump uses and features
Technical specifications: 12V and 24V models compared
Installation instructions and safety regulations in use
Frequently Asked Questions (FAQ) about the Marco UP3 electric pump
- Can the Marco UP3 pump be used to pump salt water? Yes, but we recommend rinsing the pump with clean water after use to avoid corrosion or deposits on the pump components.
- Is this pump self-priming? Yes, the Marco UP3 is a self-priming pump that can lift liquid from a height of up to 1.5 meters through the suction pipe.
- What to do if the pump does not start? Check the power supply, fuse and electrical connections. Also make sure that the pump inlet is not blocked and that the pump is not running dry.
Service, maintenance and spare parts: pump longevity

Shower kits complete with self-priming pump with electronic control. Equipped with helical PTFE gears, nickel-plated brass body and connections, integrated check valve. Complete with 4m white hose with screw connections and hand washer equipped with built-in white container. The kit is especially suitable for yachts, rubber dinghies and sailing boats. Flow rate 10 l./min.
Shower kits complete with self-priming pump with electronic control. Equipped with helical PTFE gears, nickel-plated brass body and connections, integrated check valve. Complete with 4m white hose with screw connections and hand washer equipped with built-in white container. The kit is especially suitable for yachts, rubber dinghies and sailing boats. Flow rate 10 l./min.

All Marco pump parts are manufactured and the pumps are also assembled at Marco's factory in Italy.





