Lowrance Autopilots
The Marinekauppa's selection includes high-quality autopilots for boats manufactured by Lowrance.Lowrance Autopilots group products
/lowrancesimradbg-nac-1-autopilotti-kaapeliohjaukseen-06ace245468b49.png)
Lowrance's all-new Smartsteer autopilot with direct control from your HDS Gen2, HDS Gen2 TOUCH or the new HDS -Gen3 display keeps your boat on course, steers along a route or towards a specified waypoint. The autopilot comes pre-programmed with all the traditional route/waypoint runs, heading hold and multiple trolling patterns. Quickly and easily convert your day's track into a route and return to port the same route. Everything you need to install the autopilot is in this package in one box. Focus on fishing and let the autopilot keep you on course.
The new HDS -Gen3 device has a pre-installed SmartSteer interface, which allows you to control the autopilot functions directly from the device's screen. You can also get the same SmartSteer autopilot control on the HDS -Gen2 and HDS -Gen2 TOUCH devices by downloading the new 3.5 update from the Lowrance website. After the update, the AutoSteer operating menu will appear in your device's menu, with the SmartSteer feature of which you can control the autopilot directly from the device's screen. The AutoSteer interface also gives you control over the Motorguide Xi5 PinPoint GPS bow thruster directly from the screen. With the SmartSteer interface, you can switch the controlled engine from outboard to bow thruster while flying!
Package contents
- NAC -1 Autopilot computer: The brain behind the pilot's actions.
- Helm-1 Cable Steering Work Unit: Replaces the original steering drum. Compatible with Morse 290, 304411 and Teleflex SSC52 cable steering units.
- Point-1 Heading and GPS Sensor: Provides highly accurate and fast position and heading information regardless of vessel speed.
- NMEA2000 parts: 4-output N2K splitter, 2ft, 6ft and 15ft N2K cables, N2K power cable, Terminators
- Auto/Standby button
- Heading, waypoint, route or cursor driving modes can be controlled directly from the Gen2 or Gen2 Touch displays.
- The new SmartSteer interface allows you to control your Lowrance autopilot and MotorGuide Xi5 Pinpoint trolling motors directly from the display.
- Making a “one-touch” route from a track
- Multiple turning/trolling patterns for more efficient fishing
- Recommended for single-engine boats under 9m
- VRF (Virtual Rudder Rate) simplifies installation and eliminates the need for a rudder rate sensor
- Easy to set up – Clear instructions and menus for setup
- Simple to install – Pre-assembled connectors make installation easy
- Compatible with Morse 290, Morse 304411 and Teleflex SSC52 cable controls
- Helm-1 work unit replaces the original cable control drum
/180268a8492c71271.jpg)
/lowrancesimradbg-nac-1-hydraulipilotti-06ace246712e6a.jpg)
- NAC-1 autopilot computer
- Pump-1 for autopilot
- Precision-9 compass
- Automatic standby button, metal
- NMEA 2000 Micro-C, low insertion loss, 4-way connector
- NMEA 2000 network extension cable, 6 ft.
- N2KEXT-15RD – 15 ft. power extension cord
- N2KEXT-2RD – 2 ft. power extension cord
- TR-120-KIT network termination resistor kit
/lowrancesimradbg-nac-1-hydraulipilotti-sis-point-1-kompassin-ja-nmea2000-starter-kitin-06ace251903124.jpg)
- Control your outboard by heading, waypoint, route, or cursor from the multifunction display.
- The Lowrance SmartSteer™ interface allows you to hydraulically steer your outboard motor and electrically steer your MotorGuide Xi5 Pinpoint trolling motor.
- One-touch route creation from saved tracks.
- Repeat the route with automatic turn patterns.
- Recommended for single outboard boats up to 30 feet long.
- VRF (Virtual Rudder Feedback) makes installation easier – no separate rudder feedback is required.
- Easy installation – straightforward instructions guide you through the first installation.
- Simple plug and socket connection, no complicated wiring
- Backed by Lowrance Advantage Service Program
- Can be used with Lowrance Elite FS, HDS Gen2 /Gen3/Carbon/Live series devices
- Can be used with Simrad NSS evo2/evo3/evo3s, Go series devices
/lowrancesimrad-wr10-autopilotin-kauko-ohjain-06accc76939335.jpg)
Lowrance remote control
Easy to carry around
Easy to install
- Easy to use and install
- Compact and lightweight remote control with large buttons
- Steering or steering setting in 1° and 10° increments
- Separate autopilot standby and engagement buttons
- Wrist or lanyard attachment
- Up to 30 meters range
- Intended for use with BT1 base station (sold separately)
