Marine Electrical - June Special Offers
Marine Electrical - June Special Offers -ryhmän tuotteet
Hub size: (+) 19 mm, (-) 17 mm. 2 pcs. M6 bolts for cable connection.
• For 25-50mm² cable
• Sold in pairs
• Weight: 260g
Dehumidifier Arida Oslo
Arida Oslo – an efficient dehumidifier with WiFi connection for cold and humid spaces on board
Arida Oslo is a powerful dehumidifier specially designed to deal with moisture and odors in cold areas of boats. It works great in cabins, engine rooms, storage rooms and winter storage areas where low temperatures and humidity often cause problems. Thanks to advanced drying rotor technology and an integrated heating element, the dehumidifier works optimally even in temperatures of 0 degrees.
Arida Oslo effectively keeps the interior of your boat dry and fresh with its daily drying capacity of up to 10 liters. It is equipped with a 150° rotating air damper that distributes dry air evenly throughout the room, making it easier to dry clothes and reducing condensation on walls and surfaces. It is also quiet, with a noise level of only 33 dB, making it suitable for use even in small and cramped spaces without disturbing others.
The dehumidifier is easy to use thanks to its intuitive digital display and can be emptied either manually via the easy-to-use 3-liter water tank or continuously via the included silicone hose. The antibacterial pre-filter and ionization technology promote healthier indoor air, preventing both the traditional "boat smell" and unpleasant odors in cabins and storage areas.
Remote control via app: Connect Arida Oslo to the Smart Life app and control your home's humidity with your mobile phone wherever you are. Perfect for cottages, basements or other rooms you don't visit every day.
Developed in Norway for Nordic conditions, the Arida Oslo combines high capacity, advanced technology and ease of use. It is the perfect choice for boat owners who want to protect their boat and equipment from moisture while maintaining a healthy and pleasant indoor climate all year round.
- Dehumidification capacity: up to 10 liters per day
- Technology: Tumble dryer rotors
- WiFi: Yes
- Water tank capacity: 3 liters
- Temperature range: operates from 0 °C upwards
- Sound level: 33 dB
- Air damper: 150° rotatable
- Water tank: 3 liters, front emptying or with silicone hose for continuous emptying
- Filter: Antibacterial pre-filter with ionization
- Warranty: 2 years
- Developed in: Norway
- Weight: 6.8 kg
- Dimensions: 317 x 213 x 499 mm
- Sound level: 33 / 45 dB
- Rated power consumption: 370 watts
- Maximum power consumption: 680 watts
Designed for installation on a radar mount, roof, swim platform or other fixed structure.
The lantern has a lifespan of over 50,000 hours and comes with a 10-year warranty.
It uses only 1.8 watts and is one of the smallest 2NM anchor lights on the market.
• Color: White 360°
• Installation: Top mounting
• Voltage: 12V
• Visibility: 2NM
• Approved according to USCG and ABYC A-16.
Light type: Anchor light
Length: 50cm (20')
Color: White 360°
Installation: Fixed and foldable
Voltage: 12V
Visibility: 2 NM
Power: 1.8W @ 12V
- Anchor light
- Visibility 2NM
- Length 50cm
A red LED traffic light made by Attwood, which is stylishly designed and waterproof
Attwood LightArmor LED path lights are corrosion resistant and waterproof. (IP rating 67). There is an indicator light on the top of the light that lights up when it is on. The compact size allows for easy installation in tight spaces, and the smooth shape prevents ropes from catching on the light and preventing damage to the light. The colored diodes have a lifespan of over 50,000 hours. Visibility 2NM.
- Light type: Left side
- Color: Red
- Installation: Surface mounting
- Voltage: 12V
- Visibility: 2NM
- Approved to USCG and ABYC A-16 standards.
Attwood LightArmor LED traffic lights are waterproof and highly resistant to corrosion
The top of the light has an indicator light that lights up when it is on. The compact size allows for easy installation in tight spaces, and the smooth shape prevents ropes from catching on the light and preventing damage to the light. The colored diodes have a lifespan of over 50,000 hours. Visibility 2NM.
- Light type: Left side
- Color: Red
- Installation: Surface mounting
- Voltage: 12V
- Visibility: 2NM
- Approved to USCG and ABYC A-16 standards.
- IP rating 67
Attwood LightArmor LED traffic lights are waterproof and highly resistant to corrosion
Attwood LightArmor LED path lights are corrosion resistant and waterproof. (IP rating 67). There is an indicator light on the top of the light that lights up when it is on. The compact size allows for easy installation in tight spaces, and the smooth shape prevents ropes from catching on the light and preventing damage to the light. The colored diodes have a lifespan of over 50,000 hours. Visibility 2NM.
The product is attached with three screws and a gasket is included. Screws are not included in the package.
- Light type: right-hand side
- Color: Green
- Installation: Surface mounting
- Voltage: 12V
- Visibility: 2NM
- Approved to USCG and ABYC A-16 standards.
- Diameter: 60mm
- Height: 32mm
Red LED traffic light with a stylish stainless steel housing by Attwood
Attwood Round LED Path Lights are made of stainless steel and are corrosion resistant and waterproof, IP rating 67. The colored diodes offer a long service life of over 50,000 hours. Visibility 2NM.
Features:
- Light type: Left side
- Color: Red
- Installation: Side mounting
- Voltage: 12V
- Visibility: 2NM
- Diameter: 53 mm
- Approved to USCG and ABYC A-16 standards.
- Left-hand traffic light
- Stainless steel
- Side mounting
Green LED traffic light with a stylish stainless steel housing by Attwood
Attwood Round LED Path Lights are made of stainless steel and are corrosion resistant and waterproof, IP rating 67. The colored diodes offer a long service life of over 50,000 hours. Visibility 2NM.
Features:
- Light type: right-hand side
- Color: green
- Installation: Side mounting
- Voltage: 12V
- Visibility: 2NM
- Diameter: 53 mm
- Approved to USCG and ABYC A-16 standards.
- Right-hand traffic light
- Stainless steel
- Side mounting
Red oval traffic light with a stylish stainless steel housing by Attwood
Attwood Oval LED path lights are made of stainless steel. The lights are corrosion-resistant and waterproof, IP rating 67. The colored diodes offer a long service life of over 50,000 hours. Visibility 2NM.
Features:
- Light type: Left side
- Color: Red
- Installation: Side mounting
- Voltage: 12V
- Visibility: 2NM
- Approved to USCG and ABYC A-16 standards.
- Left-hand traffic light
- Stainless steel
- Side mounting
Green oval utility light with a stylish, stainless steel housing by Attwood
Attwood Oval LED path lights are made of stainless steel. The lights are corrosion-resistant and waterproof, IP rating 67. The colored diodes offer a long service life of over 50,000 hours. Visibility 2NM.
Features:
- Light type: right-hand side
- Color: green
- Installation: Side mounting
- Voltage: 12V
- Visibility: 2NM
- Approved to USCG and ABYC A-16 standards.
- Right-hand traffic light
- Stainless steel
- Side mounting
LightArmor Plug In mounting bases are designed to provide premium performance, durability, and a finished look. Careful design and quality materials make them a reliable choice for Attwood light poles.
Securely fitting structure
The thread-lock design is a perfect match for Attwood light poles with a threaded locking collar. This system ensures a tight and secure fit and prevents annoying rattling during driving or trailering.
Features
Threadlocking ensures a secure fit
The protective cover stays securely in place
Low profile prevents water from accumulating on the surface
Durable construction for marine conditions
- Attwood light pole bracket
- 2 pole
- 910 for light poles
- Black
Mounting base Attwood 911339 RF 2-pole
Attwood 911339 is a 2-pole zamak mounting base for Attwood light poles. The base is equipped with a 12 degree angle and a chrome-plated surface. The base has a rotating protective cover that protects the connector when the light pole is not in use.
The connector is protected against incorrect installation, and the nickel-plated contacts are highly resistant to corrosion in marine conditions. The mounting base is suitable for installation on narrow bulkheads or deck surfaces.
Features
2-pole connection
12 degree mounting angle
Zamak body
Chromed surface
Rotating protective cover
Nickel-plated, corrosion-resistant contacts
Protection against incorrect installation
Suitable for narrow installation stacks
Dimensions
Length 101mm
Width 41mm
Mounting hole diameter 34 mm
Compatibility
Fits Attwood series:
51100
5300
910851
5091
- Attwood light pole bracket
- 2 pole
- 910 for light poles
- Stainless steel
- Attwood light pole bracket
- 2 pole
- 910R for light mast
- Stainless steel
Light type: Anchor light
Length: 30cm (12')
Color: White 360°
Installation: Fixed and foldable
Voltage: 12V
Visibility: 3 NM
Power: 1.8W @ 12V.
Suitability: For use on boats up to 20 meters in length.
- Anchor light
- Visibility 3NM
- Length 30cm
BEP Remote Main Power Switch. This remote main power switch allows you to mount the switch close to the battery and control it from behind the helm, for example. This shortens the cable length and reduces the cable size, saving costs and weight. Excellent for use as a bow thruster switch, for example.
Functions: On/OFF
Suitable for both recessed and surface mounted use (52 mm hole for recessed installation).
Spark-proof
LED status display
Removable knob
Voltage: 9.5V - 32V
Surface-mounted connections 2 x M10
Maximum starting load: 1250A for 10 seconds
Maximum load for 5 minutes: 455A
Continuous load: 275A
Dimensions: L 69 x W 69 x H 101 mm.
• On/Off
• 275A continuous current
• 1250A max 10 seconds
BEP connection rail with protective cover. Conductive parts made of tin-plated brass. Connection screws (4mm) made of stainless steel. 2pcs bolts (6mm) made of stainless steel. Connection point height: 29mm
- Conductive parts made of tin-plated brass
- Connector screws 4mm
- Multiple sizes available
Fuse holder for BEP MAXI fuses. Ideal for, among other things, attaching the outgoing cable from the battery charger. 6 mm terminals for cables up to 25 mm² (can be installed with ring cable lugs). The fuse holder is made of tinned brass for the best contact surface. Protective cover made of polycarbonate.
• For Maxi fuses
• Cables up to 25mm²
• 71x53x36mm
- Made of stainless steel.
- LED light when turned on
- Waterproof IP67
- Max 5A
- 12V
BEP stainless steel push button with LED indicator. Made of stainless steel and silver alloy plated connectors. LED light ring for "On" status indication. Waterproof, IP67 rated. Max 5A12V
- LED
- Waterproof
- Red light
