New group
Tuoteryhmät
New group -ryhmän tuotteet
Fits Highline, Silverline and S-line boats:
- HLA230
- HLA250
- HLA300
- HXL195
- HXL230
- HXL250
- HXL275
- SLN310
- SLN350
- SLN380
- SLR270
- SLR290
- SLR310
- SLR350
- SLA290
- SLA270
Kampanja
Original oars for Talamex Comfortline 200-300cm inflatable boats. Oar length 142cm.
- Length 142cm
- Sold in pairs
Innovative and patented davit for inflatable boats. Dinghy Rings FLEX is attached directly to the transom without drilling and is suitable for most boats. The unique design allows the inflatable boat to be lifted into an upright position by hand. Dinghy Rings FLEX is height adjustable and can be disassembled for storage.
Specifications:
- 30/25mm stainless steel A4
- Polyester straps
- EVA foam
- Suitable for inflatable boats with conical pontoons, up to 50 kg and 2.8 meters long.
- Package weight: 7.6 kg
- Package size: 800 x 400 x 180mm
- Pontoon c/c: 102-127cm
- Boat width: 137-172cm
- Recommended maximum boat length: 280cm
- Maximum load (including outboard motor): 50kg
- Recommended outboard motor size: 2-4 hp
- Unique design
- No drilling required
- Easy to install
Adjustable foot and lifting system holder for inflatable boats. This handy holder works horizontally, making it easier to launch the boat. You can complete it with blocks, a pulley and a rope.
Tube diameter: 42mm
Made of AISI 316 stainless steel
Mounting piece size (width x height): 200x120mm
Delivered in pairs (2 pieces)
Weight: 16kg/pair
Maximum load: 110kg/pair
Tube diameter: 42mm
Made of AISI 316 stainless steel
Mounting piece size (width x height): 200x120mm
Delivered in pairs (2 pieces)
Weight: 16kg/pair
Maximum load: 110kg/pair
- Delivered in pairs
- The weight of one bracket is 16kg.
- The maximum load is 110 kg/pair
Boat lift to the swimming platform
Brobergs self-balancing boat lift is made of high-quality stainless steel. The crane consists of two parts and is mounted on the dock. It is easy to handle by one person and allows the boat to be quickly lifted to the swimming platform with the engine. The crane can be removed in a few simple movements, leaving four discreet attachment points on the dock. It is supplied complete with two articulated arms and four attachment points with quick-release fasteners.
Suitable for inflatable boats, RIBs and hard boats up to 100 kg. Recommended engine size up to 10 hp. Made of rust-free stainless steel for long life. The boat is lifted up by hand and tilted into place using articulated arms. Quick-release latches make it easy to quickly remove the lifting arms and release the dock.
Specifications:
Material: Stainless steel
Recommended boat size: Maximum 100 kg
Recommended engine size: Up to 10 hp
Comes with:
- 2 x support beams
- 2 x U-beams
- 4 x mounting pieces
- 6 x locking loops
- 4 x washers - mounting block resistors
If necessary, supplement with 8 M8 bolts and nuts. The length of the bolts depends on the thickness and structure of the platform.
- Self-balancing boat crane
- Easy to install
- Versatile use
Inflatable boat davit brackets
An ingenious and flexible davit bracket with a carrying handle. Glues to the hull of the inflatable boat and screws the dock/swimming ladder lock onto the swim platform. The package includes 2 brackets for the boat and 2 brackets for the swim platform.
All metal parts are made of stainless steel.
Makes it easier to lift and attach the inflatable boat to the swimming platform and is quick to remove and attach.
- Metal parts made of stainless steel
- Glued to a rubber boat
- Built-in handle
Original oars for Talamex Aqualine 250-300cm inflatable boats. Oar length 152cm.
- Length 152cm
- Sold in pairs
Inflatable boat patch kit. Includes two 25x15cm PVC pieces (black + light grey). Also includes a valve tightening tool. Glue must be purchased separately.
The package includes:
- 1 x Valve tightening tool
- 1 x Black PVC piece 25 x 15 cm
- 1 x Light grey PVC piece 25 x 15 cm
PVC or Hypalon – How do I know what material my boat is made of?
If you are planning to repair or glue something to a RIB or inflatable boat, it is important to find out what type of fabric your boat is made of, as choosing the right glue depends on the material.
There are two main types of boat fabrics: PVC and Hypalon (rubber/neoprene). Here are a few ways to identify what type of fabric your boat is made of.
- Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
- Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.
- For PVC inflatable boats
- Includes two 25x15cm PVC pieces
- Also included is a valve tightening tool
Kampanja
A meter made by Talamex that can be used to measure pressure.
- Hand pump pressure gauge
- Scale: 1 bar | 15 psi
- Manufacturer: Talamex
