Care Products - June Special Offers
Care Products - June Special Offers -ryhmän tuotteet

303 Mold & Mildew Cleaner + Blocker is an effective cleaner for removing mold and mildew stains.
As a boat owner, you’re constantly dealing with mold damage caused by moisture, which is why it’s a good idea to keep this product on hand. However, it’s not just for boat interiors – you can use it anywhere in your home where mold spots may occur.
The product can be used on any surface that is at risk of mold growth. The most common applications are vinyl boat cushions, bimini tops and other vinyl, plastic and fabric surfaces that are exposed to moisture. 303 Mold & Mildew Cleaner + Blocker is also suitable for damp areas of the home, such as bathrooms, where mold and mildew stains are a common problem. The product can be sprayed on shower walls, countertops and around windows to prevent mold growth. It is also suitable for outdoor furniture and other fabrics that are exposed to moisture.
Quickly removes mold and mildew stains:
Prevents the recurrence of mold and mildew spots
Contains no bleach, leaves a fresh scent
Suitable for all water-safe surfaces, including vinyl and fabrics
Does not remove existing impregnation or UV protection
Instructions for use:
- Removes mold
- Suitable for water-resistant surfaces
- Does not contain bleach

303 Touchless Sealant is a powerful sealant that provides a durable seal quickly. It lasts up to 6 months, provides a higher gloss than traditional waxes and is non-slip. Suitable for all boat surfaces including paint, glass, rubber and chrome. Also great for jet skis and RIBs.
Instructions for use:
Wash the boat with a regular boat shampoo to ensure the surface is completely clean. Polish if necessary. Spray Touchless Sealant onto a small area. Treat approximately 2x2m areas at a time to prevent the product from drying out in the sun. Rinse the treated area immediately with water, dry with a microfiber cloth and continue to the next section.
Size: 0.946 liters
- Ceramic wax
- Suitable for all boat surfaces
- Protects up to 6 months
- Easy to use

303 MARINE FABRIC GUARD is one of the best tarpaulin and fabric impregnation agents on the market.
It extends the life of boat covers, dock shelters, fabric upholstery, carpets, outdoor furniture, awning fabrics, indoor furniture, rainwear, tents, etc.
303 Marine Fabric Guard makes the treated surface water-repellent while allowing the material to breathe. It provides UV protection and repels dirt and mold growth. 303 Marine Fabric Guard restores the material's original shine and functionality.
- Canopy impregnation agent
- Recommended by canopy manufacturers
- Used for boat covers, awnings, etc.

303 Marine Aerospace Protectant is a unique preservative originally developed by NASA to protect rubber, plastic and vinyl from harmful UV rays. This water-based product provides effective protection and is recommended by many leading manufacturers in the industry, including Brig Inflatable Boats, Sunbrella and the US Coast Guard.
Features:
Strong UV protection
Keeps the treated surface looking like new
Slows down surface fading and cracking
Revives the color and shine of old surfaces
Antistatic – prevents the adhesion of dust, dirt and spills
Leaves the surface dry and dirt-repellent
The product offers the best UV protection on the market for all vinyl, plastic, PVC, rubber, nylon, neoprene, leather, gelcoat, fiberglass, glass, plexiglass, teak, and metal surfaces. Easy to use: spray and wipe off. It restores shine to worn surfaces without the slipperiness of wax.
Suitable for use, for example:
In boats, motorhomes and inflatable boats
In snowmobiles, swimming pools and floats
In seals, fuel lines and windows
In plastic furniture, tires and life jackets
Treated surfaces repel dirt, and the substance prevents materials from fading, drying out and cracking. It does not contain harmful silicone and leaves a water and dirt-repellent surface.
- Strong UV protection
- Suitable for boats, inflatable boats, motorhomes and seals, among others.
- Restores shine and luster
- Recommended by leading manufacturers

- Maintenance-free respirator
- A and P2
- Made by 3M
- Half mask

- Double filter
- 2 pieces in the package
- Manufacturer: 3M

Two A2 gas filters for the half mask.

The 3M™ Perfect-It™ Foam Polishing Pad is a fine-pored and soft pad that allows you to easily remove sanding marks and small imperfections from both original paint surfaces and repainted surfaces.
Features:
- Designed to remove wheel grinding marks and other minor surface imperfections
- Soft foam polishing pad gives a high-gloss finish
- Suitable for use with all 3M™ polishes
- A key part of 3M's color-coded polishing process
Specifications:
- Material: Foam plastic
- Product diameter: 150mm
- Type: Polishing
- Color: Yellow
- Reversible
- Fine-pored soft foam pad
- Bright and shiny result

The double-sided, wavy foam pad absorbs more abrasive and holds it in place. If you need more contact surface and efficiency, single-sided pads are also available, which are easy to change thanks to the Hookit™ attachment system. Suitable for use on gelcoat, removing scratches and surface damage, and smoothing out P1200 or finer sanding marks.
3M™ Perfect-It™ Double-Sided Foam Pads feature a center plate for added durability. The pads are attached with a quick-release polish adapter with a 5/8" thread. They are easy and quick to attach and center on a variety of standard rotary polishers. The pads can also be quickly removed for replacement.
Features:
Quick changes thanks to the 3M Hookit™ attachment system and quick release
The wavy foam surface holds the polish in place and ensures a smooth finish
A key part of 3M's color-coded grinding and polishing process
Specifications:
Material: Foam plastic
Product diameter: 150mm
Type: Polishing
Color: Green
- Reversible
- The design keeps the polish in place
- The product dimension is 150mm.

Abnet's easy-to-use and durable 3-liter pressure bottle is designed for demanding use where high quality is valued. These features make the pressure bottle an excellent choice for both professionals and home users. It guarantees efficiency and durability in all cleaning tasks.
Each pressure cylinder is equipped with:
With air pressure gauge for precise monitoring
With safety valve for safe use
With a 35cm long lance for optimal reach
With ergonomic handle for a comfortable and secure grip
The volume is 3 liters.
Note: Cleaning agent is not included in the package.
- Spray and foam gun
- The volume is 3 liters.
- Abnet Original

Ergonomic and sturdy ABNET spray bottle equipped with a dual-action trigger that sprays both when pushing in and releasing the handle, allowing for faster application.
The bottle holds 0.5 liters of ABNET Professional (liquid) and has a 360° spray system that allows you to spray the bottle at any angle, even upside down. By turning the nozzle, the spray angle is adjusted, which gives a fine spray and spray pattern.
Cleaning agents are not included.
- Double-acting
- 360° spraying system
- Adjustable spray angle

Fill the pressure sprayer with cold water and dispense Abnet detergent concentrate according to the instructions. Spray and clean with a sponge, brush or high-pressure washer and rinse with water.
- Volume: 1L
- Spray/foam bottle

Deck mat EVA light gray teak
EVA light grey teak is an easy-to-install cover and floor mat that combines a modern look with excellent comfort. The grooved teak pattern provides effective anti-slip and good insulation, making the material suitable for both indoor and outdoor use.
The material is UV resistant and maintains its properties in varying weather conditions. The 3M self-adhesive tape on the back makes installation quick and easy without the need for separate adhesives.
Applications
Boat decks and floors
Terraces and outdoor spaces
Indoor areas where anti-slip is required
Home and leisure items
Features
EVA material
Grooved teak pattern
Excellent anti-slip properties
Good insulation
UV resistant
Suitable for indoor and outdoor use
Self-adhesive backing with 3M tape
Specifications
Material: EVA
Dimensions 60cm x 240cm
Thickness 6 mm
Bar width 50 mm
Groove width 8 mm
Milling depth 3 mm
Color light gray
Pattern teak groove
Background 3M tape

FFP2 class respirator made in Sweden. This respirator is tight-fitting and has elastic headbands for maximum comfort. The mask has a five-layer construction, with two filter layers made of completely hypoallergenic material. The respirator offers high filtration efficiency.
Features:
Sealable face mask
Ergonomic face mask
Very low breathing resistance
High filtration efficiency
Elastic headbands
Allergy-friendly
Adjustable
- FFP2
- Allergy-friendly
- Very low breathing resistance

BRAVA Euromeci is a high-quality protective wax specially developed for matte and carbon fiber imitation rubber boats and RIBs. Thanks to its unique formula, BRAVA protects the rubber material, restores its original appearance and keeps it soft and flexible. Perfect for renewing aged or worn rubber.
- Protects and restores: Perfect for matte and carbon fiber imitation surfaces.
- Softening effect: Maintains the elasticity of rubber.
- Easy to apply: Spray directly onto a clean, dry surface.
- Age Renewal: Restores rubber to its original appearance.
Use:
Clean the surface thoroughly and let it dry completely.
Spray the wax directly onto the rubber.
Polish with a soft cloth for best results.
- High-quality protective wax
- For matte rubber surfaces
- Volume: 0.75L
- Appearance: Cream
- Color: White
- Water solubility: Soluble
- Density: 1 kg/l (+/- 0.1)

BRAVA Euromeci is an effective cleaner for inflatable boats, developed with plant-based surfactants for gentle and effective cleaning of all types of rubber materials. Perfect for removing dirt, salt and other contaminants from inflatable boats and RIBs.
Effective and gentle: Cleans without damaging the material.
Plant-based surfactants: A more environmentally friendly alternative to boat maintenance.
Wide application: Suitable for all kinds of rubber materials.
Use:
Spray directly onto the surface to be cleaned.
Wipe with a damp sponge.
Leave on for a few minutes if necessary.
Rinse thoroughly with clean water.
For best protection, finish with wax to protect the surface.
- Effective rubber cleaner
- Vegetable surfactants
- Volume: 0.75L
- Appearance: Liquid
- Color: Red
- pH value: 13 (+/- 0.5)
- Density: 1 kg/l (+/- 0.1)

- Suitable for synthetic teak
- Also works on rubber, plastic, gelcoat surfaces and metal
- Biodegradable composition
- Package size 1 liter

BRAVA Euromeci RIB PROTECTIVE is a highly flexible and durable protective agent for inflatable boats. It is specially formulated to resist saltwater corrosion. Perfect for protecting and renovating rubber, neoprene, PVC and Hypalon surfaces.
Elastic and durable: Withstands movement and load without cracking.
Corrosion protection: Protects against salt water and marine conditions.
Easy to apply: No primer required – apply directly to cleaned surface.
Wide compatibility: Suitable for rubber, neoprene, PVC and Hypalon.
Use:
Prepare the surface by cleaning it thoroughly with BRAVA cleaner to remove grease and salt. Then sand the surface with fine sandpaper (wet sanding) and clean again.
Apply two coats with a brush for best protection and coverage.
- Protective enamel for inflatable boats
- Anti-corrosion protection
- Capacity: 0.75 l
- Coverage: 6–7 m²/l
- Recommended number of layers: 2
- Dry matter content: 35%
- Drying time (dust dry): 2 hours
- Overcoatable: 6 hours
- Recommended layer thickness: 60 µ
- Flash point: 13 °C
- Density: 1.03 kg/l

BRAVA Euromeci is a protective wax that preserves and restores the original appearance of your inflatable boat. The wax makes the rubber material soft and protects it from aging and external influences. Ideal for all types of inflatable boats and RIBs.
Use:
Clean the surface.
Make sure the surface is completely dry.
Spray the wax directly onto the rubber.
Polish with a soft cloth to obtain a smooth and protective surface.
- Protective wax for all inflatable boats
- Protect and restore
- Capacity: 0.75 l
- Color: White
- pH value: 6
- Density: 1 kg/l (+/- 0.1)
- Protects and restores: Gives new life to aged and faded rubber.
- Softening effect: Maintains the flexibility of the material.
- Long-lasting protection: Creates a protective surface against dirt and weathering.
- Easy to apply: Spray and polish with a soft cloth for best results.

BRAVA Cleaner is an effective cleaner and color restorer for inflatable boats that have been damaged by the sun, dirt and salt water. The product restores the boat's original color and shine and is suitable for all types of rubber and vinyl surfaces. Perfect for refreshing surfaces that have lost their shine and color.
- Restores color and shine to sun-faded and aged surfaces.
- An effective cleaner that removes salt and other dirt.
- Versatile: Suitable for all types of rubber and vinyl.
Use:
Spray directly onto the surface to be treated.
Let it act for a few seconds.
If necessary, scrub with a brush or sponge.
Rinse thoroughly with water before the product dries on the surface.
For best results, finish by applying a protective wax for long-lasting protection.
Specifications
Capacity: 0.75 l
Appearance: Liquid
Color: Neon green-yellow
pH value: 13 (+/- 0.5)
Density: 1 kg/l (+/- 0.1)
- Effective rubber cleaning
- Restores color and shine
- Capacity: 0.75 l



