Brava protective coating for inflatable boats 0.75L
- Protective enamel for inflatable boats
- Anti-corrosion protection
- Capacity: 0.75 l
- Coverage: 6–7 m²/l
- Recommended number of layers: 2
- Dry matter content: 35%
- Drying time (dust dry): 2 hours
- Overcoatable: 6 hours
- Recommended layer thickness: 60 µ
- Flash point: 13 °C
- Density: 1.03 kg/l
BRAVA Euromeci RIB PROTECTIVE is a highly flexible and durable protective agent for inflatable boats. It is specially formulated to resist saltwater corrosion. Perfect for protecting and renovating rubber, neoprene, PVC and Hypalon surfaces.
Elastic and durable: Withstands movement and load without cracking.
Corrosion protection: Protects against salt water and marine conditions.
Easy to apply: No primer required – apply directly to cleaned surface.
Wide compatibility: Suitable for rubber, neoprene, PVC and Hypalon.
Use:
Prepare the surface by cleaning it thoroughly with BRAVA cleaner to remove grease and salt. Then sand the surface with fine sandpaper (wet sanding) and clean again.
Apply two coats with a brush for best protection and coverage.
Prodnr: 22524
- Protective enamel for inflatable boats
- Anti-corrosion protection
- Capacity: 0.75 l
- Coverage: 6–7 m²/l
- Recommended number of layers: 2
- Dry matter content: 35%
- Drying time (dust dry): 2 hours
- Overcoatable: 6 hours
- Recommended layer thickness: 60 µ
- Flash point: 13 °C
- Density: 1.03 kg/l
BRAVA Euromeci RIB PROTECTIVE is a highly flexible and durable protective agent for inflatable boats. It is specially formulated to resist saltwater corrosion. Perfect for protecting and renovating rubber, neoprene, PVC and Hypalon surfaces.
Elastic and durable: Withstands movement and load without cracking.
Corrosion protection: Protects against salt water and marine conditions.
Easy to apply: No primer required – apply directly to cleaned surface.
Wide compatibility: Suitable for rubber, neoprene, PVC and Hypalon.
Use:
Prepare the surface by cleaning it thoroughly with BRAVA cleaner to remove grease and salt. Then sand the surface with fine sandpaper (wet sanding) and clean again.
Apply two coats with a brush for best protection and coverage.
Prodnr: 22524
Recommended for you
CONTACT INFORMATION
STORES
Veneentekijäntie 3
00210 Helsinki (Lauttasaari)
FINLAND
mon–fri 9–18
sat 9-15
sun closed
VANTAA
Porttisuontie 13
00120 Vantaa (Porttipuisto)
FINLAND
mon–fri 10-18
sat 10-15
sun closed
COMPANY INFORMATION
Company ID 1827467-5
Founded in 2003
