Maintenance August Sale!

Glydus hydraulic steering system for 175 hp outboard motors

Glydus 175 hp is a modern hydraulic steering system for outboard motors up to 175 horsepower. The system is based on the previous Multisteer OH 175 model and offers a stable, efficient and precise steering feel for both day trips and longer journeys.

The new HR22 pump operates at higher pressure and responds faster, improving steering accuracy. The non-feedback function keeps steering stable without disturbing movements from the motor. The structure is designed for easy installation, low friction and long-lasting use.

Perfectly suited for medium-sized boats and provides reliable steering even at higher speeds.

Features

• Complete set includes steering pump, cylinder, hoses and oil
• Non-feedback system keeps direction stable without motor influence
• Refurbished HR22 pump, operating pressure 1015 psi
• Recommended engine power 115–150 hp
• Maximum engine power 175 hp
• Suitable for engine wells from 570 mm wide
• Recommended steering wheel diameter 350 mm for optimal control

Motul 4100 SYN-nergy SPEC 10W-40 is a semi-synthetic engine oil developed for modern gasoline and diesel engines that require stability, cleanliness and strong wear protection. The oil is suitable for both naturally aspirated and turbocharged engines with direct or indirect injection and works with fuels such as gasoline, ethanol, LPG, diesel and biodiesel. The formula provides high protection against LSPI and safe operation even under heavy loads and varying temperatures. The Motul 4100 series has been developed to meet the requirements of several European manufacturers such as Mercedes, VAG and Renault. It provides a cleaner engine, a stable oil film and safe operation on both short and long journeys.

* Suitable for both petrol and diesel engines with or without turbocharging
* Approvals from Mercedes, PSA and Renault, among others
* Prevents LSPI and provides a cleaner combustion environment
* Stable viscosity for smooth engine operation all year round
* Compatible with catalytic converters and many modern fuel types

Motul 8100 X-Cess Gen2 5W-40 is a high-performance fully synthetic engine oil developed for modern and efficient petrol and diesel engines. It is suitable for both naturally aspirated and turbocharged engines with direct or indirect injection and is specially designed for vehicles that still have the manufacturer's warranty. The formulation provides a stable oil film, strong heat resistance and reliable engine cleaning even under heavy loads. The oil works with a wide range of fuels, including petrol, ethanol, LPG, diesel and biodiesel. The Motul 8100 series is known for its many OEM approvals and is a safe choice for those who want maximum compatibility and safe engine operation.

* Recommended for modern European gasoline and diesel engines
* Multiple OEM approvals from BMW, Mercedes, Porsche, Renault and VW
* Strong thermal stability for high load and long service life
* Protects against LSPI and keeps the engine cleaner
* Compatible with catalytic converters and many modern fuels

Motul Drive Supra 80W-90 is a high performance EP gear oil developed for drives, reverse gears and mechanical transmissions exposed to high pressures and shock loads. It is ideal for marine applications where drives and transmissions work under heavy use under varying loads, such as inboard drives, outboard drives (where GL-4/GL-5 is permitted) and reverse gears in pleasure boats.

The oil is developed for both synchronized and non-synchronized transmissions, combined transmissions/differentials and hypoid transmissions without LS function. It provides stable performance even at low speeds with high loads or at high speeds with moderate loads, precisely the conditions often encountered in marine environments.

The effective EP additive provides strong protection against metal-to-metal contact, wear and micropitting, and the film remains stable over long-term use.

* EP gear oil for boat drives, reverse gears and mechanical transmissions
* Suitable for both synchronized and non-synchronized gearboxes
* Very good load resistance under heavy operating conditions and shock loads
* Stable lubricating film that protects against wear and corrosion
* Suitable for hypoid gears without LS function
* Excellent performance at both high and low speeds

Motul Tekma Supra 15W-40 LS engine oil

Motul Tekma Supra 15W-40 LS is a durable mineral-based engine oil for modern diesel engines in demanding conditions. It is ideal for boats and other heavy-duty applications where reliability, engine cleanliness and long service life are of primary importance.

The oil is designed for diesel engines that meet Euro II–VI emission standards. It is compatible with EGR, SCR and AdBlue systems, as well as particulate filters.

The Low SAPS formulation contains low levels of sulphated ash, phosphorus and sulphur, which helps protect engine aftertreatment systems and maintain the efficiency of emissions systems.

Features

• Mineral-based diesel engine oil
• Designed for high loads
• Low SAPS technology
• Compatible with EGR, SCR and DPF systems
• Suitable for Euro II–VI diesel engines
• Protects against wear, soot formation and oil oxidation
• Maintains a stable lubricating film even under heavy use
• Works in varying temperatures
• Can be mixed with mineral and synthetic oils

Applications

• Boat diesel engines
• Work machines
• Trucks
• Buses
• Other heavy-duty diesel engines

Benefits for boat use

• Excellent protection under long-term loads
• Helps keep the engine clean
• Supports long engine life
• Suitable for demanding marine conditions

The Italian Savoretti Armando steering wheel is made of stainless steel and has a black polyurethane steering ring for extra grip. The steering wheel has a diameter of 35 cm and has 6 curved 16 mm stainless steel spokes. The steering wheel hub is made of PU-coated aluminum and the hub cap/cover is made of artificial leather for a more luxurious feel.

Standard 3/4" cone.

Optimize and maintain the performance of your Volvo Penta D4 engine (2020-) with this Orbitrade service kit – perfect for annual service and preventative maintenance. The kit includes all the service parts you need to keep your engine in top condition.

This is included in the package:
* Fuel filter (original number 23954708)
* Oil filter (original number 22030848)
* Bypass oil filter (OEM 22030852)
* Air filter (original number 21702999)
* Impeller (original number 24139377)

The set corresponds to original service parts 24272027 and 23746227.

Fits the following Volvo Penta D4 engines from model year 2020-:
D4-145I-G
D4-150A-G
D4-175I-G
D4-230A-G, D4-230I-G
D4-270A-G, D4-270I-G
D4-300A-G, D4-300I-G
D4-320A-G, D4-320I-G

Orbitrade maintenance kit with high-quality parts that fit Volvo Penta D6 engines from model year 2020. The kit includes all parts needed for regular maintenance, except engine oil.

The package includes:
* Fuel filter (equivalent to original filter 23954708)
* Oil filter (equivalent to original filter 22030848)
* Oil filter (equivalent to original filter 22030852)
* Air filter (equivalent to original filter 21702999)
* Impeller (equivalent to original part 22994993)

The service kit is specifically designed for the Volvo Penta D6 engine with the last letter G according to the list below and corresponds to OEM products 24272028 and 23746230:
D6-300A-G, D6-300I-G, D6-300D-G
D6-340A-G, D6-340D-G, D6-340I-G
D6-380A-G, D6-380I-G, D6-380D-G
D6-400A-G
D6-440A-G, D6-440I-G, D6-440I-WJ-G
D6-480D-G, D6-480I-G, D6-480I-WJ-G

This drive belt is intended for the circulation pump of several Volvo Penta KAD engines. A healthy and properly sized belt is crucial to reducing wear and ensuring reliable operation throughout the season.

The belt is manufactured to original specifications and is an excellent choice for servicing, preventive maintenance, or replacing a worn or cracked belt.

Specifications
* Type: Poly V-belt
* Location: Circulation pump and compressor
* Replaces OEM numbers: 3582424, 24677528

Fits the following engines
* KAD32P*, KAD32P-A*
* TAMD42WJ-A
* KAD43P-A, KAD43P-B, KAMD43P, KAMD43P-A, KAMD43P-B
* KAD44P, KAD44P-B, KAD44P-C, KAMD44P-A, KAMD44P-B, KAMD44P-C
* KAD300-A, KAMD300-A

Always check belt tension and pulley condition when replacing to ensure optimal life and function.

*) Fits engines with serial number SN2203202198 or later.

The bearing pin (sleeve pin) suitable for Volvo Penta is an important spare part and acts as a support shaft for the drive shaft. This bearing pin ensures stable operation and correct positioning of the fork in the shield, which promotes smooth running and reduces wear on the moving parts of the drive shaft.

This Orbitrade bearing pin corresponds to OEM numbers 853175 and 897831 and meets high quality and safety standards.

Fits the following Volvo Penta drives:
200
250
270
275
280
285
290, 290A
SP-A, SP-A1, SP-A2, SP-A/MT
DP-A, DP-A1, DP-A2, DP-B, DP-B1
DPX

Orbitrade exhaust bellows with built-in flaps. Fits Volvo Penta engines in the 200-290 series and the SP, DP and DPX models listed below. The bellows is supplied with ABA hose clamps and is of high quality, equivalent to the original.

The bellows must be replaced according to the operating device instructions.

Corresponds to OEM numbers 876633, 875828, 875829 and 850004.

Fits the following Volvo Penta drives:
200, 250
270, 270T, 275
280, 280T, 280DP, 285A
290, 290A, DP290A, 290DP
SP-A, SP-A/MT, SP-A1, SP-A2
SP-C, SP-C1
SP-E
DP-A, DP-A1, DP-A2
DP-B, DP-B1
DP-C, DP-C1
DP-D, DP-D1
DP-E
DPX-C, DPX-R, DPX-S1

Orbitrade bellows, suitable for the Volvo Penta DPH, DPR and DPI engines listed below. The bellows is supplied with hose clamps and is of high quality, identical to the original.

The bellows must be replaced according to the operating device instructions.

Corresponds to OEM number 3588753.

Fits the following Volvo Penta drives:
DPH-A, DPH-B, DPH-C, DPH-D, DPH-D1, DPH-E
DPR-A, DPR-B, DPR-C, DPR-D
DPI-A

Orbitrade drive joint bellows rubber, suitable for the Volvo Penta DPH, DPR and DPI drives listed below. The bellows are supplied with ABA hose clamps and are of high quality and are equivalent to the original.

The bellows must be replaced according to the technical specifications of the drive unit to prevent water from entering the drive unit joint.

Corresponds to OEM numbers 3808898 and 3594509.

Fits the following Volvo Penta drives:
DPH-A, DPH-B, DPH-C, DPH-D, DPH-D1, DPH-E
DPR-A, DPR-B, DPR-C, DPR-D
DPI-A

The fuel pump supplies diesel to the engine. It is often mounted on the side of the engine and pumps diesel from the tank to the injection pump. In many models, the fuel pump is driven by the engine camshaft.

It is extremely important that the fuel pump is in good condition and working as intended. If you are unsure about the condition of the pump, replace it!

The fuel pump is often called the feed pump and should not be confused with the injection pump, which distributes fuel to the various cylinders.

This fuel pump corresponds to the original number 859428 and is designed specifically for the following engine versions:
2001, 2001B, 2001AG, 2001BG, 2001D, 2001R
2002, 2002B, 2002D, 2002AG, 2002BG
2003, 2003 SOLAS, 2003B, 2003B-SOLAS, 2003D, 2003R, 2003R SOLAS
2003T, 2003TB, 2003TB SOLAS, 2003TR

NOTE! The fuel pump is a relatively new model (check the original number or compare to the picture)

Fuel filter for Volvo Penta D4 and D6 engines

High-quality Orbitrade fuel filter for Volvo Penta D4 and D6 diesel engines according to the compatibility list below.

The fuel filter should be replaced according to the engine maintenance instructions. A clogged filter can cause malfunctions or engine stalling. Lightly lubricate the O-ring with oil before installation to ensure proper sealing.

To ensure compatibility, check the engine model or compare the OEM number to your current filter.

Product information

• Manufacturer Orbitrade
• Corresponds to OEM numbers 21718912 and 3583443

Compatibility

Fits the following Volvo Penta engines:

• D4-180I-B
• D4-180I-C
• D4-180I-D
• D4-180I-E
• D4-180I-F
• D4-210A-A
• D4-210A-B
• D4-210I-A
• D4-210I-B
• D4-225A-B
• D4-225A-C
• D4-225A-D
• D4-225A-E
• D4-225A-F
• D4-225I-B
• D4-225I-C
• D4-225I-D
• D4-225I-E
• D4-225I-F
• D4-260A-A
• D4-260A-B
• D4-260A-C
• D4-260A-D
• D4-260A-E
• D4-260A-F
• D4-260D-B
• D4-260D-C
• D4-260D-D
• D4-260D-E
• D4-260D-F
• D4-260I-A
• D4-260I-B
• D4-260I-C
• D4-260I-D
• D4-260I-E
• D4-260I-F
• D4-300A-A
• D4-300A-C
• D4-300A-D
• D4-300A-E
• D4-300A-F
• D4-300D-A
• D4-300D-C
• D4-300D-D
• D4-300D-E
• D4-300D-F
• D4-300I-A
• D4-300I-C
• D4-300I-D
• D4-300I-E
• D4-300I-F
• D6-280A-A
• D6-280A-B
• D6-280A-C
• D6-280A-D
• D6-280A-E
• D6-280I-A
• D6-280I-B
• D6-280I-C
• D6-280I-D
• D6-280I-E
• D6-300A-F
• D6-300D-F
• D6-300I-F
• D6-310A-A
• D6-310A-B
• D6-310A-C
• D6-310A-D
• D6-310A-E
• D6-310D-B
• D6-310D-C
• D6-310D-D
• D6-310D-E
• D6-310I-A
• D6-310I-B
• D6-310I-C
• D6-310I-D
• D6-310I-E
• D6-330A-B
• D6-330A-C
• D6-330A-D
• D6-330A-E
• D6-330A-F
• D6-330D-B
• D6-330D-C
• D6-330D-D
• D6-330D-E
• D6-330D-F
• D6-330I-B
• D6-330I-C
• D6-330I-D
• D6-330I-E
• D6-330I-F
• D6-350A-A
• D6-350A-B
• D6-370A-B
• D6-370A-C
• D6-370A-D
• D6-370A-E
• D6-370A-F
• D6-370D-A
• D6-370D-B
• D6-370D-C
• D6-370D-D
• D6-370D-E
• D6-370D-F
• D6-370I-A
• D6-370I-B
• D6-370I-C
• D6-370I-D
• D6-370I-E
• D6-370I-F
• D6-380I-G
• D6-400A-E
• D6-400A-F
• D6-435D-A
• D6-435D-C
• D6-435D-D
• D6-435D-E
• D6-435D-F
• D6-435I-A
• D6-435I-C
• D6-435I-D
• D6-435I-E
• D6-435I-F

Fuel filter for Volvo Penta D4 and D6 engines from 2020

High-quality Orbitrade fuel filter for newer Volvo Penta D4 and D6 diesel engines according to the compatibility list below.

The fuel filter ensures that the engine receives clean, contaminant-free fuel, which is important for engine performance and service life.

The filter should be replaced according to the manufacturer's maintenance instructions. A clogged filter can cause malfunctions or engine stalling. Lightly lubricate the O-ring with oil before installation to ensure proper sealing.

To ensure compatibility, check the engine model or compare the OEM number to your current filter.

Product information

• Manufacturer Orbitrade
• Corresponds to OEM numbers 24215091, 23954708, 22984478
• Suitable for newer D4 and D6 engines from around 2020 onwards

Compatibility

Fits the following Volvo Penta engines:

• D4-145I-G
• D4-150A-G
• D4-175I-G
• D4-230A-G
• D4-230I-G
• D4-270A-G
• D4-270I-G
• D4-300A-G
• D4-300I-G
• D4-320A-G
• D4-320I-G
• D6-300D-G
• D6-300I-G
• D6-340A-G
• D6-340D-G
• D6-340I-G
• D6-380A-G
• D6-380D-G
• D6-400A-G
• D6-440A-G
• D6-440D-G
• D6-440I-G
• D6-440I-WJ-G
• D6-480D-G
• D6-480I-G
• D6-480I-WJ-G

Impeller with gasket and grease for Volvo Penta D4 engines

High quality Orbitrade impeller kit, including impeller, gasket and mounting grease. Designed specifically for Volvo Penta D4 engines according to the compatibility list below.

The impeller is an important part of the engine cooling system and should be replaced regularly according to the maintenance instructions. A worn or dried-out impeller can reduce cooling and lead to engine overheating.

Compatibility

Fits the following Volvo Penta D4 engines:

• D4-180I-B
• D4-180I-C
• D4-180I-D
• D4-180I-E
• D4-180I-F
• D4-210A-A
• D4-210A-B
• D4-210I-A
• D4-210I-B
• D4-225A-B
• D4-225A-C
• D4-225A-D
• D4-225A-F
• D4-225I-B
• D4-225I-C
• D4-225I-D
• D4-225I-E
• D4-225I-F
• D4-260A-A
• D4-260A-B
• D4-260A-C
• D4-260A-D
• D4-260D-B
• D4-260D-C
• D4-260D-F
• D4-260I-F
• D4-260D-D
• D4-260I-A
• D4-260I-B
• D4-260I-C
• D4-260I-D
• D4-260I-E
• D4-300A-A
• D4-300A-C
• D4-300A-D
• D4-300A-F
• D4-300D-A
• D4-300D-C
• D4-300D-D
• D4-300D-F
• D4-300I-A
• D4-300I-C
• D4-300I-D
• D4-300I-E
• D4-300I-F

Impeller kit for Volvo Penta D6 engines

High-quality Orbitrade impeller kit, which includes an impeller, gasket and necessary parts for Volvo Penta D6 engines according to the compatibility list below.

The impeller is a key part of the engine cooling system and should be replaced regularly according to the maintenance instructions. During use, the impeller wears out and can dry out, which impairs its function. A faulty impeller can lead to insufficient cooling and engine overheating.

Compatibility

Fits the following Volvo Penta D6 engines:

• D6-280A-A
• D6-280A-B
• D6-280A-C
• D6-280A-D
• D6-280A-E
• D6-280I-A
• D6-280I-B
• D6-280I-C
• D6-280I-D
• D6-280I-E
• D6-300I-F
• D6-310A-A
• D6-310A-B
• D6-310A-C
• D6-310A-D
• D6-310A-E
• D6-310D-B
• D6-310D-C
• D6-310D-D
• D6-310D-E
• D6-310I-A
• D6-310I-B
• D6-310I-C
• D6-310I-D
• D6-310I-E
• D6-330A-B
• D6-330A-C
• D6-330A-D
• D6-330A-E
• D6-330A-F
• D6-330D-B
• D6-330D-C
• D6-330D-D
• D6-330D-E
• D6-330D-F
• D6-330I-B
• D6-330I-C
• D6-330I-D
• D6-330I-E
• D6-330I-F
• D6-350A-A
• D6-350A-B
• D6-370A-B
• D6-370A-C
• D6-370A-D
• D6-370A-E
• D6-370A-F
• D6-370D-A
• D6-370D-B
• D6-370D-C
• D6-370D-D
• D6-370D-E
• D6-370D-F
• D6-370I-A
• D6-370I-B
• D6-370I-C
• D6-370I-D
• D6-370I-E
• D6-370I-F
• D6-435D-A
• D6-435D-C
• D6-435D-D
• D6-435D-E
• D6-435D-F
• D6-435I-A
• D6-435I-C
• D6-435I-D
• D6-435I-E
• D6-435I-F

Impeller kit for Volvo Penta D6, D8 and TAMD63 engines

High quality Orbitrade impeller kit, including impeller, gasket and necessary parts. Fits Volvo Penta D6, D8 and TAMD63 engines according to the compatibility list below.

The impeller is a key part of the engine cooling system and should be replaced regularly according to maintenance instructions. A worn or dried-out impeller can reduce cooling and lead to engine overheating.

Compatibility

Fits the following Volvo Penta engines:

• D6-280A-A
• D6-280A-B
• D6-280A-C
• D6-280A-D
• D6-280A-E
• D6-280I-A
• D6-280I-B
• D6-280I-C
• D6-280I-D
• D6-280I-E
• D6-300A-F
• D6-300A-G
• D6-300D-F
• D6-300D-G
• D6-300I-F
• D6-300I-G
• D6-310A-A
• D6-310A-B
• D6-310A-C
• D6-310A-D
• D6-310A-E
• D6-310D-B
• D6-310D-C
• D6-310D-D
• D6-310D-E
• D6-310I-A
• D6-310I-B
• D6-310I-C
• D6-310I-D
• D6-310I-E
• D6-330A-B
• D6-330A-C
• D6-330A-D
• D6-330A-E
• D6-330A-F
• D6-330D-B
• D6-330D-C
• D6-330D-D
• D6-330D-E
• D6-330D-F
• D6-330I-B
• D6-330I-C
• D6-330I-D
• D6-330I-E
• D6-330I-F
• D6-340A-G
• D6-340D-G
• D6-340I-G
• D6-350A-A
• D6-350A-B
• D6-370A-B
• D6-370A-C
• D6-370A-D
• D6-370A-E
• D6-370A-F
• D6-370D-A
• D6-370D-B
• D6-370D-C
• D6-370D-D
• D6-370D-E
• D6-370D-F
• D6-370I-A
• D6-370I-B
• D6-370I-C
• D6-370I-D
• D6-370I-E
• D6-370I-F
• D6-380A-G
• D6-380D-G
• D6-380I-G
• D6-400A-E
• D6-400A-F
• D6-400A-G
• D6-435D-A
• D6-435D-C
• D6-435D-D
• D6-435D-E
• D6-435D-F
• D6-435I-A
• D6-435I-C
• D6-435I-D
• D6-435I-E
• D6-435I-F
• D8A1-A MP
• D8A2-A MP
• D8A3-A MP
• D8A4-A MP
• D8A5-A MH
• D8A6-A MH
• TAMD63L-A
• TAMD63P-A

Seal kit for gear mechanism Volvo Penta DPH and DPR

High quality Orbitrade seal kit for the gear mechanism of Volvo Penta DPH and DPR drives. The kit includes the necessary seals and sealing rings that ensure proper tightness and prevent oil and water leaks.

A gasket set is an important part of maintenance or demolition work, as worn or old gaskets can cause malfunctions, internal corrosion and oil leaks.

Compatibility

Fits the following Volvo Penta drives:

• DPH-A
• DPH-C
• DPH-D
• DPH-D1
• DPH-E
• DPR-A
• DPR-B
• DPR-C
• DPR-D