New group

Meluton Reduce® Spray Glue

The Reduce® Spray Glue is a professional-grade adhesive designed for installation of multilayer noise insulation materials in tough environments and high temperatures. Its ultra-?ne web spray ensures clean, even application and strong, ?exible adhesion to laminates, insulation, aluminium, plastics, and composites.

Star brite Non-Slip Deck Wax contains UV protection and stain-repellent ingredients that keep your deck looking great without making it slippery. Non-Slip Deck Wax can be used on all fiberglass surfaces, roughened or smooth, to improve appearance, provide UV protection and a stain-repellent finish.

1. PREPARATION

Wash the lid with Star Brite Lid Cleaner to remove dirt and grime. Rinse thoroughly. Also rinse the brush well.

2. USE

While the deck is still wet/damp, spray Non-Slip Deck Wax liberally onto the area to be treated.

3. DISTRIBUTION

Apply using a lid brush.

4. DRYING

Let dry.

5. ATTENTION

You can also apply the product to a dry lid, but make sure to carefully wipe off any excess.

Star Brite's new Non-Slip Deck Wax creates protection against dirt, grime and UV rays without making the deck surface slippery.

Polarshine Marine Deep Clean is a highly effective, deep-cleaning oxalic acid-based cleaning concentrate for cleaning the boat's bilge and bottom. The product's gel-like composition, combination of surfactants and oxalic acid dissolve yellowing and deposits very effectively. Deep Clean removes deposits caused by aquatic vegetation, yellowing, algae, bottom vegetation, rust stains and fish blood from the surface. The fresh-smelling Deep Clean is also pleasant to use indoors. The product is suitable for gelcoat, fiberglass, paint, plastic, varnish and other acid-tolerant surfaces.

Vinyl cleaner is formulated to remove tough dirt, greasy marks and slime.

Applications include car, RV and boat upholstery, interior/exterior moldings, rain gear and outdoor cushions and canopies. The powerful formula is tough on dirt, but is not harmful to vinyl. The vinyl cleaner does not contain acids or corrosive substances. Suitable for vinyl, plastic, rubber and leather.

DIRECTIONS FOR USE: Spray the cleaner onto the surface to be cleaned. Spread the cleaner evenly by rubbing with a cloth, soft brush or sponge in a circular motion. Allow the cleaner to work on the surface for 15-30 seconds before wiping or rinsing. Stubborn stains may require a second cleaning, soaking for about a minute and gently scrubbing, then rinsing or wiping.

NOTE: Test sensitive surfaces (leather, decals, waterline tape, painted areas) and areas where product may drip on a small, inconspicuous area before use. Do not use if any adverse effects occur. Star brite will not be liable for any damages up to the purchase price of this product.

Star brite Teak Cleaner is safe, easy to use and acid-free. Cleans teak and other wood surfaces, removing dirt, stains and weathering. The first step (Step 1) in restoring grey and dirty teak. Cleans wood for oiling and sealer

INSTRUCTIONS FOR USE FOR BADLY WEATHER-DAMAGED (GRAY OR BLACK) TEAK:

• Apply Star brite Premium Teak Cleaner directly to dry wood.
• Apply the product with a cleaning brush or Star brite Medium scrubbing pad. Leave the product on the surface for about 1-2 minutes,
  then rub along the grain of the wood to ensure a deep clean.
• Rinse thoroughly with clean water. For damaged surfaces, use a scrubbing sponge to remove dirt.

INSTRUCTIONS FOR USE FOR LIGHTLY DIRTY TEAK.

• For lightly soiled teak: Wet the wood with clean water. Apply the product with a brush or scrub pad. Rub gently to remove dirt. Rinse thoroughly with clean water. After treating the entire area, apply Star brite Premium Teak Brightener to brighten and restore the natural color of the wood.

CAUTION: Immediately rinse off any spills or drops from areas you do not want treated. Avoid contact with fabrics.

Plastic Padding Repair Kit

The Plastic Padding repair kit is a versatile and comprehensive solution for repairing plastic boats, surfboards, snowmobiles and ski boxes. The kit is especially suitable for ABS plastic, epoxy and polyester as well as fiberglass. It works great for repairing cracks and damage and for joining different materials.

Applications

• Plastic boats

• Surfboards

• Snowmobiles

• Ski boxes

• Fiberglass plastic

• Steel and galvanized steel

• Aluminum

Package contents

• 250 ml polyester

• 8 g hardener

• 2500 cm² of fiberglass mat

• Plastic spatula

• Brush

• Mixing cup

Features

• All in one repair kit

• Two-component polyester resin

• Suitable for repairing cracks and damage

• Excellent adhesion to various materials

• Also suitable for joining materials

Instructions

Preparation

• The repair area must be dry, clean and free of grease.

• Remove rust and paint

• Roughen the surface with sandpaper.

• When repairing a hole, sand the area approximately 2–3 cm around the hole.

Fiberglass mat preparation

• Cut a piece of fiberglass mat that covers the damage.

• The mat should extend approximately 2 cm beyond the damaged area.

Polyester blend

• Pour polyester into a mixing cup

• Add hardener in a ratio of 5–7 cm hardener to 50 ml polyester

• Mix thoroughly with a plastic spatula until smooth.

• Use protective gloves and goggles.

• Ensure good ventilation

Dissemination

• Apply a thin layer of polyester filler with a brush

• Place the fiberglass mat in place

• Saturate the carpet immediately with polyester

• If necessary, apply several layers wet or after the previous one has hardened.

• New layers must be applied within 12 hours or the surface must be re-primed.

• Plastic Padding fillers or gelcoat can be used to finish a smooth surface.

Curing time

• Approximately 25–30 minutes at +20 C

• At temperatures below +10 C, curing can be accelerated with heat.

Cleaning tools

• Clean tools with acetone or cellulose thinner before curing

Specifications

• Product name Repair kit

• Product type Two-component polyester resin

• Color Yellow

• Shelf life unopened 2 years

• Storage temperature 15–25 C

• Store in a dry and cool place.

• Protect from fire, heat sources and direct sunlight.

Gelcoat Filler

Gelcoat Filler is a putty for repairing surface damage to gelcoat layers. It is suitable for repairing minor damage, scratches and dents and allows for a smooth and durable finish.

Package contents

• 100 g of putty in a metal jar

• Hardener

• Mixing cup

• Stirring stick

Applications

• Surface damage to gelcoat surfaces

• Small dents and scratches on boats and other gelcoat surfaces

Instructions

Preparation

• Carefully chamfer the edges of the damage.

• Clean the repair area thoroughly with, for example, acetone.

Finish

• Apply the mixed putty to the damaged area and let it harden.

• Sand with wet sandpaper grits 600, 800 and 1200

• Finish the surface with rubbing, polish and wax

Gelcoat Filler is an easy-to-use solution for discreet and clean repairs to gelcoat surfaces.

Gelcoat Filler

Gelcoat Filler is a putty for repairing surface damage to gelcoat layers. It is suitable for repairing minor damage, scratches and dents and helps restore the surface to a smooth and clean finish.

Package contents

• 100ml putty in a metal jar

• Hardener

• Mixing cup

• Stirring stick

Applications

• Surface damage to gelcoat surfaces

• Small dents and scratches on boats and other gelcoat surfaces

Instructions

Preparation

• Carefully chamfer the edges of the damage.

• Clean the repair area with, for example, acetone

Finish

• Apply the mixed putty to the damaged area and let it harden.

• Sand with wet sandpaper grits 600, 800 and 1200

• Finish the surface with rubbing, polish and wax

Gelcoat Filler is an easy-to-use solution for discreet and durable repairs to gelcoat surfaces.

For leaks in wooden boats. Elastic, thick, rubber-based. Farm 50 is intended for sealing small gaps.

Gelcoat Filler putty for gelcoat

High quality putty for gelcoat surfaces and minor damage. The product is excellent for repairing gelcoat surfaces on boats and can also be used to repair minor damage to enamel and sanitary porcelain.

Gelcoat Filler is a two-component polyester filler that stands out for its good mechanical properties and high durability in varying weather conditions. It forms a durable and shiny surface that is easy to sand, polish, wax and paint in the desired color. The end result is waterproof and long-lasting.

Applications

• Boat gelcoat surfaces

• Surfboards

• Plastic baskets

• Enamel surfaces

• Sanitary ware

Features

• Two-component polyester putty

• Suitable for minor damage

• Durable and weatherproof result

• Easy to sand and finish

• Can be painted and polished

• Waterproof surface

Instructions

Preparation

• Rinse the surface clean of salt and impurities with fresh water at high pressure

• Let the surface dry.

• Sand the surface smooth with sandpaper grit 100–240.

• Remove dust by brushing and clean with a degreaser

Dosage

• Mix a quantity of putty about the size of a golf ball, i.e. approximately 40 ml.

• Add 3–4 cm of hardener, or about 2 percent.

• Mix thoroughly until the mixture is smooth and free of air bubbles.

• Use protective gloves and goggles.

• Close the putty and hardener immediately after dispensing to prevent drying.

Dissemination

• Spread with a steel trowel so that the compound also penetrates the sanding patterns.

• Fill to desired thickness, maximum 3 mm

• Let it harden and sand with coarse sandpaper, grit 240–800.

• Finish with finer sandpaper, grit 800–1200

• The best working temperature is around +20 C.

Curing time

• Approximately 40–60 minutes at temperatures above 20 C

Purifying

• Clean tools with ethyl acetate immediately after use

Things to note

• Grease, oil and silicone completely prevent the product from sticking

Plastic Padding fiberglass screed

Plastic Padding fiberglass filler is a fast-curing and highly durable repair compound for filling large holes and cracks in fiberglass and metal. The product hardens in approximately 20–30 minutes at +20 C and is suitable for demanding repair work on boats and other structures.

The fiberglass-reinforced filler creates a strong and tight finish. It is an excellent choice for repairing boat hulls and fiberglass structures, and can also be used to repair large holes and dents in car bodies. The product has excellent adhesion to metal, wood and hard plastic.

Applications

• Boat hulls

• Fiberglass structures

• Large holes and cracks in fiberglass

• Metal surfaces

• Car body damage

• Hard plastic and wood

Features

• Fiberglass reinforced repair compound

• Suitable for large damage

• Fast curing

• Very durable and tight finish

• Good adhesion to many materials

Instructions

Preparation

• Sand the surface to be repaired carefully.

• Remove rust and paint completely

Dosage

• Mix a golf ball-sized amount of the compound, approximately 40 ml.

• Add 3–4 cm of hardener, or approximately 2–4 percent.

• Mix thoroughly until the mixture is smooth and free of air bubbles.

• Use protective gloves and goggles.

• Close the packages immediately after dispensing.

Dissemination

• Spread with a steel trowel so that the compound also penetrates the sanding patterns.

• Fill to desired thickness, maximum 5 mm

• Let it harden and roughen with sandpaper grit 80–120.

• The best working temperature is around +20 C.

Curing time

• Approximately 20–30 minutes at +20 C

Purifying

• Clean tools with ethyl acetate immediately after use

Things to note

• Grease, oil and silicone prevent the product from sticking

• Steel, aluminum and galvanized steel must be sanded and degreased before application.

Glossy acrylic paint for painting engines, engine parts and drive wheels. Produces a durable, oil-resistant and scratch-resistant surface. The product is resistant to temperatures up to 120 degrees.

As a primer, you can use M-protect primer, product number 22149, or CRC Zinc primer (product number 21019).
Clearcoat (product number 22139) should be applied over the drive wheels and engine paint for better protection, depth and shine.

303 MARINE FABRIC GUARD is one of the best tarpaulin and fabric impregnation agents on the market.

It extends the life of boat covers, dock shelters, fabric upholstery, carpets, outdoor furniture, awning fabrics, indoor furniture, rainwear, tents, etc.
303 Marine Fabric Guard makes the treated surface water-repellent while allowing the material to breathe. It provides UV protection and repels dirt and mold growth. 303 Marine Fabric Guard restores the material's original shine and functionality.