Flushing device for fresh water flushing of the cooling system of outboard motors and drive units. Particularly suitable for flushing the engine after use and during preparation for winter storage. The device is installed over the cooling water intakes and connected to the water hose.
Freshwater flushing of outboard motors and propulsion equipment
Installed over the cooling water intakes
Connects to a garden hose
Do not operate the outboard motor at speeds exceeding 1200 rpm.
Do not operate the Mercruiser drive at speeds greater than 600 rpm.
Make sure the motor does not overheat during operation.
It is recommended to remove the propeller before use.
Always follow the engine manufacturer's instructions.
To use the Gardena connection, a separate hose connector is required, item number 7296
Flushing device for powerful outboard motors and drives over 50 horsepower. Intended for flushing the engine with fresh water after use and during preparation for winter storage. Two water hoses provide a higher water flow and ensure that cooling water is supplied to both sides of the drive.
Freshwater flushing of outboard motors and propulsion equipment
Installed above the cooling water intakes
Connects to fresh water hose
Do not operate the outboard motor at speeds exceeding 1200 rpm.
Do not operate the Mercruiser drive at speeds greater than 600 rpm.
Make sure the motor does not overheat during operation.
Remove the propeller before use.
Always follow the engine manufacturer's instructions.
To ensure sufficient cooling, a water pressure of approximately 5 bar is required from the water hose.
To use the Gardena connection, a separate hose connector is required, item number 7296
If you wish, I can also make a shorter version of this or edit the text to be completely consistent with other flushing devices.
For freshwater flushing of outboard motors.
Flushing device for fresh water flushing of the cooling system of inboard engines. The device is connected to the cooling water intake located outside the hull and connected to a water hose. The telescopic arm makes installation and use easier.
Freshwater flushing of inboard engines
Connects to the cooling water inlet on the outside of the frame
Compatible with standard water hose
Make sure the motor does not overheat during operation.
Remove the propeller before use.
Always follow the engine manufacturer's instructions.
Flushing device for freshwater flushing of the cooling system of Volvo Penta drives. Intended for use during engine maintenance and preparation for winter storage. The device is installed over the cooling water intakes and connected to the freshwater supply.
Freshwater flushing of Volvo Penta drives
Installed over the cooling water intakes
Connects to water hose
Make sure the motor does not overheat during operation.
Remove the propeller before use.
Always follow the engine manufacturer's instructions.
A separate hose connector is required for use with a garden hose, product number 7296.
A manual gear oil pump that makes it easy to change gear oil in outboard motors and drives. The pump connects to the gear at one end and to an oil bottle at the other end.
Changing gear oil in outboard motors and drives
Compatible with European oil bottles
Manual operation
Easy and clean oil change
If you wish, I can harmonize this text with other transmission oil pumps.
MR Funnel with built-in fuel filter. The filter separates dirt and water from gasoline, diesel and gasoline diluted with oil. Especially suitable for use when refueling from canisters or tanks where condensation may occur.
Gasoline refueling
Diesel refueling
Refueling with gasoline diluted with an oil mixture
Built-in fuel filter
Filters dirt and water
Diameter: 120 mm
Manual oil changer with collection tank. Sucks in liquid using vacuum. A hand pump creates vacuum in the tank, which sucks the oil into a graduated container. Not for use with gasoline, only for engine oil.
Includes 4 different sized suction hoses with inner diameters of 4, 6, 8 and 10mm and a length of 1 meter.
Funnel 20 cm + strainer + splash guard. Finnish Plastex quality. The guard makes refueling easy and safe. The fuel cannot flow over the funnel thanks to its guard. The strainer keeps small debris out of the tank.
Funnel for motor fuel, made of black plastic. Designed to minimize fuel spillage. Supplied with a strainer.
QS flushing device for freshwater flushing of the cooling system of Mercury and MerCruiser engines. Suitable for use during engine maintenance and preparation for winter storage.
Mercury and Mariner outboards with side cooling water intake, starting at 8 hp
MerCruiser Drives
Not suitable for Bravo One or Blackhawk models
OEM number: 44357Q2
Previous OEM numbers:
44357A2
44357T2
44357A2
QS Original gear oil pump for changing gear oil in outboard motors and drive units. Suitable for use with 250 ml and 1 liter oil bottles.
Outboards and drives with 3/8 inch connections, such as:
Mercury
Mariner
Mercruiser
Johnson
Evinrude
Yamaha
Suzuki
Honda
OMC Z-Drive
Cobra
Volvo Penta
Includes adapter for M8 x 1.25 thread
Hand pump for oil. Made of brass and neoprene. Resistant to oil, gasoline and salt water.
Plastic manual lap pump for transferring liquids from one container to another without electricity. The lap pump utilizes gravity and the lap effect, and the flow of liquid is started with a hand-operated pump. A simple and reliable solution for many applications.
Inserting the hose
Place the other end of the hose into a container containing liquid
Place the other end in a lower or empty container
Starting the flow
Pump manually from the pump
The valve opens and closes, creating a vacuum and starting the flow
Fluid transfer
The liquid continues to flow using gravity
Flow continues until the container is empty or the hose is removed
Fuel transfer
Suitable for transporting gasoline, diesel and other light fuels
Resistant to kerosene, light oils, diesel, chemical pesticides, toluene, light solvents, water and alcoholic beverages
Aquarium maintenance
Draining and refilling water makes aquarium maintenance easier
Bottling of home wine
Transferring liquid from fermentation vessel to bottles without mixing of sediments
Other liquids
Suitable for transferring water, oils and various chemicals
A manual lap pump is a practical tool for boating, home and hobby use when you need easy and reliable liquid transfer without electricity.
A wheeled cart that allows you to move a Tyresö outboard motor stand up to 150kg. Suitable for outboard motors up to 150kg. The welded square profile sinks into the legs of the outboard motor stand, making it easy to move.
A wheeled cart that allows you to move a Tyresö outboard motor stand 225kg. Suitable for outboard motors up to 225kg. The welded square profile sinks into the legs of the outboard motor stand, making it easy to move.
Very sturdy outboard motor stand. Compatible with motors weighing up to 150kg. Durable welded square profile.
An optional compatible cart for moving is: Tyresö motorized trestle cart 8896.
Very sturdy outboard motor stand. Compatible with engines weighing up to 225kg. Durable welded square profile.
A compatible cart for moving is available as an accessory: Tyresö motorized trestle cart 8899.
Very sturdy outboard motor stand. Compatible with engines weighing up to 325kg. Durable welded square profile.
A compatible cart for moving is available as an accessory: Tyresö motorized trestle cart 8899.
