Easterner Flushing Device, Double Hoses + Adapter
- For fresh water flushing into the cooling system
- Thread for connecting a hose
- Double hoses
Flushing device for +50 hp outboard motors
Flushing device for powerful outboard motors and drives over 50 horsepower. Intended for flushing the engine with fresh water after use and during preparation for winter storage. Two water hoses provide a higher water flow and ensure that cooling water is supplied to both sides of the drive.
Use
Freshwater flushing of outboard motors and propulsion equipment
Installed above the cooling water intakes
Connects to fresh water hose
Safety instructions
Do not operate the outboard motor at speeds exceeding 1200 rpm.
Do not operate the Mercruiser drive at speeds greater than 600 rpm.
Make sure the motor does not overheat during operation.
Remove the propeller before use.
Always follow the engine manufacturer's instructions.
Attention
To ensure sufficient cooling, a water pressure of approximately 5 bar is required from the water hose.
To use the Gardena connection, a separate hose connector is required, item number 7296
If you wish, I can also make a shorter version of this or edit the text to be completely consistent with other flushing devices.
Prodnr: 7286
Manufacturer prodnr: C10963A-PLASTIC TOP
Accessories
- For fresh water flushing into the cooling system
- Thread for connecting a hose
- Double hoses
Flushing device for +50 hp outboard motors
Flushing device for powerful outboard motors and drives over 50 horsepower. Intended for flushing the engine with fresh water after use and during preparation for winter storage. Two water hoses provide a higher water flow and ensure that cooling water is supplied to both sides of the drive.
Use
Freshwater flushing of outboard motors and propulsion equipment
Installed above the cooling water intakes
Connects to fresh water hose
Safety instructions
Do not operate the outboard motor at speeds exceeding 1200 rpm.
Do not operate the Mercruiser drive at speeds greater than 600 rpm.
Make sure the motor does not overheat during operation.
Remove the propeller before use.
Always follow the engine manufacturer's instructions.
Attention
To ensure sufficient cooling, a water pressure of approximately 5 bar is required from the water hose.
To use the Gardena connection, a separate hose connector is required, item number 7296
If you wish, I can also make a shorter version of this or edit the text to be completely consistent with other flushing devices.
Prodnr: 7286
Manufacturer prodnr: C10963A-PLASTIC TOP
Recommended for you
CONTACT INFORMATION
STORES
Veneentekijäntie 3
00210 Helsinki (Lauttasaari)
FINLAND
mon–fri 9–18
sat 9-15
sun closed
VANTAA
Porttisuontie 13
00120 Vantaa (Porttipuisto)
FINLAND
mon–fri 10-18
sat 10-15
sun closed
COMPANY INFORMATION
Company ID 1827467-5
Founded in 2003
