Electric bilge pumps

The Seaflo 01 Series 500GPH is a range of reliable bilge pumps that provide efficient drainage and can be easily controlled using either an automatic switch, a manual switch or a combination of both. It is designed to meet high standards and offers many useful features. Its sealed ABS plastic housing ensures strength and water resistance. The compact and efficient design, combined with a sealed, long-life motor, provides good performance and reliability.

The pump meets high standards and is approved according to RoHS, SGS and ISO standards. The pump also runs dry, which means that it will not be damaged quickly even if it is not submerged in water. With a low noise level and easy installation, the Seaflo 01 Series is a user-friendly and reliable solution for boats and other watercraft.

22L PUMP
Flow: 22l/min
Voltage: 12 volts
Hose connection: 19mm
Max current consumption: 1.0A
Recommended fuse: 2A

30L PUMP
Flow: 30l/min
Voltage: 12 volts
Hose outlet: 19mm
Max current consumption: 4A

47L PUMP
Flow: 47l/min
Voltage: 12 volts
Hose connection: 19mm
Max current consumption: 5A
Recommended fuse: 5A

69L PUMP
Flow: 69l/min
12 volts
Voltage: 12V
Max current consumption: 6A
Recommended fuse: 6A

Experience worry-free boating with the Aqua Void bilge pump. Its new reinforced quick-release system makes cleaning and installation easier while being efficient. The improved motor ensures reliability and performance in all conditions. Supplied with an Ultima level switch that automatically starts the bilge pump when the water level reaches 50mm and stops it when the water level is 20mm.

The Aqua Void bilge pump is designed for practical one-handed operation and is perfect for tight spaces. The easy-to-use pump mounting system makes installation simple, and the pump motor can be quickly removed for cleaning or inspection without the need for tools. With an improved motor and high-flow vortex, the Aqua Void offers impressive efficiency and higher flow rates while maintaining efficient energy consumption.

The bilge pump is supplied complete with both straight and 90° hose connections. Aqua Void meets the strict requirements of the international standard ISO 8849 marine.

Aqua Void 500 GPH
Capacity: 600 GPH / 38 l/min
Hose connection: 19 mm
Voltage: 12V
Power consumption: 2.7 amps
Fuse: 3.5 amps
Length: 133mm
Width: 70mm
Height: 119mm
Weight: 0.32 kg

Aqua Void 800 GPH
Capacity: 795 GPH / 50 liters per minute
Hose connection: 19 mm
Voltage: 12V
Power consumption: 3.7 amps
Fuse: 5 amps
Length: 133mm
Width: 70mm
Height: 119mm
Weight: 0.36 kg

Reliable, convenient and compact, the ready-to-install Utima Bilge™ bilge pump with built-in Ultima Switch automatic switch provides years of reliable service. Rated at 12V, supplied with a straight hose connection. The pump also has a removable check valve.

600GPH
Flow rate at 3 ft (0.9 m) head (13.6V/27.2V): 32 l/min - 500 GPH
Output direct (13.6V/27.2V): 38 l/min - 600 GPH
Body: ABS Thermoplastic
Shaft seal: Lip seal
Motor shaft: Stainless steel
Wire thickness: 16 GA (1.3mm2)
Current consumption: 2.5 A
Fuse: 5 A
Hose connections: ¾”

800GPH
Body: ABS Thermoplastic
Shaft seal: Lip seal
Motor shaft: Stainless steel
Wire thickness: 16 GA (1.3mm2)
Flow rate at 3 ft (0.9 m) head (13.6V/27.2V): 38 l/min - 600 GPH
Output direct (13.6V/27.2V): 51 l/min - 800 GPH
Current consumption: 3 A
Fuse: 5 A
Hose connections: ¾”

1250GPH
Output at 3 ft (0.9 m) head (13.6V/27.2V): 51 l/min - 800GPH
Output direct (13.6V/27.2V): 79 l/min - 1250GPH
Body: ABS Thermoplastic
Shaft seal: Lip seal
Motor shaft: Stainless steel
Wire thickness: 16 GA (1.3mm2)
Current consumption: 3A
Fuse: 5A
Hose connections: 1" (approx. 28mm) and 1¼"" (approx. 32mm)

Experience worry-free boating with the Aqua Void bilge pump. Its new reinforced quick-release bracket makes cleaning and installation easier while being convenient and efficient. The improved motor ensures reliability and performance in all conditions.

The Aqua Void bilge pump is designed for easy one-handed removal, making it perfect for tight spaces. The easy-to-use bracket makes installation effortless, and the pump motor can be quickly removed for cleaning or inspection without the need for tools.

With an improved motor and more efficient flow impeller, the Aqua Void delivers impressive efficiency and higher flow rates while maintaining efficient energy consumption. It is designed to meet the needs of demanding users.

The bilge pump comes complete with both straight and 90° hose connections and can be easily upgraded with a circuit breaker for automatic operation. Aqua Void is a solution that simplifies your boating experience.

Johnson Pump Marine is known for its industry-leading reliability, and the Aqua Void lives up to that reputation with its robust construction and meticulous engineering. The Aqua Void meets the stringent requirements of the international standard ISO 8849 marine and is the perfect solution for a safe and worry-free boating experience.

The best choice when you need a high-performance, high-output submersible pump that is designed to meet and exceed the strict requirements of commercial and recreational use. The pump is equipped with a 12-pole motor that is cooled by the pumped water. The motor is mounted on double ball bearings, which extends the pump's service life.

L1600 - 1600GPH

• Output at 1.0 m head (13.6V/27.2V): 98 l/min – 1550 GPH
• Output direct (13.6V/27.2V): 100 l/min – 1600 GPH
• Axle: SS2343
• Wire thickness: 16 GA
• Cable length: 1.8m
• Max. Ø: 108 mm
• Max. height: 149mm
• Weight: 1.3kg
• Current consumption: 7A
• Fuse: 10A
• Hose connections: 1"/1¼" (28/32mm)

L2200 - 2060GHP

• Output at 1.0m head (13.6V/27.2V): 120 l/min – 1900 GPH
• Output direct (13.6V/27.2V): 130 l/min – 2060 GPH
• Axle: SS2343
• Wire thickness: 16 GA
• Cable length: 1.8m
• Maximum Ø: 108mm
• Maximum height: 177mm
• Weight: 2.25kg
• Current consumption: 7.5A
• Fuse: 12A
• Hose connections: 1"/1¼" (28/32mm)

L4000 - 4000GPH

• Output at 1.0 m head (13.6V/27.2V): 164 l/min – 2600 GPH
• Output direct (13.6V/27.2V): 252 l/min – 4000 GPH
• Axle: SS2343
• Wire thickness: 14GA
• Cable length: 1.8m
• Max. Ø: 121mm
• Max. height: 216mm
• Weight: 2.45kg
• Current consumption: 7.5A
• Fuse: 25A
• Hose connections: 1½”/2" (38/50mm)

The Attwood HD2000 is a bilge pump that offers the highest capacity and can withstand extreme conditions. It is designed to withstand chemicals such as engine oil and strong cleaning agents. The bearing design allows for cooler motor operation, which extends the life of the unit.

The pump has an open flow capacity of over 126 liters per minute and draws less than 7 amps of current. The HD2000 pump is designed to provide unprecedented durability and efficiency in a compact form factor. The pump features a swivel outlet for easy hose installation.

12V pump
- Capacity: 126 liters/min (2000 GPH)
- Hose connection: 28mm (1-1/8")
- Voltage: 12V
- Current consumption: 6.6A
- Fuse size: 12A
- Dimensions:
- Width: 97mm (3.83")
- Height: 152mm (5.97")

24V pump
- Capacity: 126 liters/min (2000 GPH)
- Hose connection: 28mm (1-1/8")
- Voltage: 24V
- Current consumption: 3.5A
- Fuse size: 7A
- Dimensions:
- Width: 97mm (3.83")
- Height: 152mm (5.97")

The product has a 3-year warranty.

The Sahara Mk2 is the only automatic bilge pump that eliminates air locks. Its patented X-Air™ impeller forces out air pockets that can get trapped in the hoses and bottom of the pump, preventing the pump from running dry. The pump is easy to install and maintain, with external mounting feet and an integrated outlet. The Sahara Mk2 offers more installation options and is optimised to be a direct replacement for the major brands of pumps on the market, using identical bores. It offers 40% more protection against water damage and corrosion compared to the Mk1. Warranty: 3 years.

Specifications

S1200

• Flow: 67 L/min (1200 GPH)
• Hose connections: 25mm (1") & 28mm (1-1/8")
• Voltage: 12V
• Fuse size: 6A
• Water level for activation: 50mm
• Water level for stopping: 19mm
• IP rating: IP68
  

• Length: 133mm
• Width: 88mm
• Height: 103mm
• Cable length: 750mm

S800

• Flow: 45 L/min (800 GPH)
• Hose connections: 19mm (3/4") & 25mm (1")
• Voltage: 12V
• Fuse size: 5A
• Water level for activation: 50mm
• Water level for stopping: 19mm
• IP rating: IP68
  

• Length: 133mm
• Width: 88mm
• Height: 103mm
• Cable length: 750mm

S500

• Flow: 28 L/min (500 GPH)
• Hose connections: 19mm (3/4") & 25mm (1")
• Voltage: 12V
• Fuse size: 3A
• Water level for activation: 50mm
• Water level for stopping: 19mm
• IP rating: IP68
  

• Length: 133mm
• Width: 88mm
• Height: 103mm
• Cable length: 750mm

Recommended boat sizes

• 5.5m / Sahara Mk2 S500
• 5.5 - 7 m / Sahara Mk2 S800
• 6.7 - 8 m / Sahara Mk2 S1200

The Tsunami Mk2 is the only bilge pump that eliminates air locks. Its patented X-Air™ impeller forces out air pockets that can get trapped in the hoses and bottom of the pump, preventing the pump from running dry. The pump is easy to install and maintain, with external mounting feet and an integrated outlet. The Tsunami Mk2 offers 40% more protection against water damage and corrosion than the Mk1.

Specifications:

• Flow: 67 L/min (1200 GPH)
• Hose connections: 25mm (1") & 28 mm (1-1/8")
• Voltage: 12V
• Fuse size: 5A
• Minimum water level: 10mm (2/5")
• IP rating: IP68

Dimensions:

• Length: 104mm
• Width: 101mm
• Height: 112mm
• Cable length: 735mm

Recommended boat sizes:

• 5.5m / Tsunami Mk2 T500
• 5.5 - 7 m / Tsunami Mk2 T800
• 6.7 - 8 m / Tsunami Mk2 T1200

The Tsunami Mk2 is the only bilge pump that eliminates air locks. Its patented X-Air™ impeller forces out air pockets trapped in the hoses and bottom of the pump, preventing the pump from running dry. The pump is easy to install and maintain, with external mounting feet and an integrated outlet. The Tsunami Mk2 offers 40% more protection against water damage and corrosion than the Mk1.

• Flow: 45 L/min (800 GPH)
• Hose connections: 19mm (3/4") & 25mm (1")
• Voltage: 12V
• Fuse size: 4A
• Minimum water level: 10mm (2/5")
• IP rating: IP68

Dimensions:

• Length: 96mm
• Width: 101mm
• Height: 110mm
• Cable length: 735mm

Recommended boat sizes:

• 5.5m / Tsunami Mk2 T500
• 5.5 - 7m / Tsunami Mk2 T800
• 6.7 - 8m / Tsunami Mk2 T1200

3 year warranty

The Seaflo 06 Series 69L is a durable, fully submersible bilge pump designed to efficiently remove water from a boat. The pump has a capacity of 4164 liters per hour (69.4 liters per minute), ensuring fast and efficient water removal.

The pump has a built-in float switch that enables automatic operation and provides user comfort and reliability. A removable strainer makes cleaning and maintenance easy, prevents blockages and ensures long-lasting performance. The compact and efficient motor is designed for long life and is quiet in operation.

Specifications:

• Capacity: 4164 liters/hour (69.4 liters/min) (1100 GPH)
• Dimensions (LxWxH): 150 x 83 x 103mm
• Weight: 0.5 kg
• Voltage: 12V
• Maximum current consumption: 6A
• Lifting height: 3.7 meters
• Level control: Automatic via built-in float switch
• Hose connection: 28mm (1-1/8") nylon connection
• Power cord: 1 meter (16 AWG wires)
  
  Additional features include ignition protection and corrosion-resistant construction, ensuring safe and reliable operation. The pump is fully submersible and can withstand dry running under normal workloads, making it versatile and reliable for a variety of marine applications.