Trim tabs and cylinders
Individual working cylinders and trim levelsTuoteryhmät
Trim tabs and cylinders -ryhmän tuotteet
Kampanja
9x9cm Ultraflex Trimming Plate, which fits the Uflex Compact Trimming Plate Series.
- Width: 228mm
- Depth: 228mm
- Suitable boat length: 4.2-5.5m
- Trim plate plates
- For Ultraflex Compact
- Boat length: 4.2-5.5m
- 2pcs trim plates
Kampanja
Lenco trim cylinder 101 XD
Applications: Most commonly used with HD, XD, High Performance and Super Strong trim plates.
Features:
- Reliable and twice the power compared to a similar hydraulic cylinder.
- Waterproof Plug-and-play connections for maximum operational safety.
- Voltage: 12V
- Cylinder force: 227kg
- Installation: 3/8"
- Cable length: Approx. 1.8m
Kampanja
Lenco trim cylinder 101 XD. Applications: Most commonly used with HD, XD, High Performance and Super Strong trim plates.
Features:
- Voltage: 12V
- Cylinder force: 227kg
- Installation: 3/8"
- Cable length: Approx. 1.8m
- Special features:
Waterproof Plug-and-play connections for maximum operational safety.
- 12V
- 273mm
- Stroke length 57mm
- Power cord 1.8m
Kampanja
Lenco trim cylinder 101 XD
Applications: Most commonly used with HD, XD, High Performance and Super Strong trim plates.
Features:
- Voltage: 12 volts
- Cylinder force: 227kg
- Installation: 5/16" - 8mm
- Cable length: Approx. 1.8m
- Waterproof Plug-and-play connections
- 12V
- Length 273mm
- Stroke length 57mm
- Lower hole 8mm
Kampanja
Lenco trim cylinder 101 XDS
Applications: Designed for OEM specific kits where installation space is limited. This is the shortest cylinder in the range.
- Voltage: 12V
- Cylinder force: 227kg
- Installation: 5/16"
- Cable length: Approx. 1.8m
- Waterproof Plug-and-play connections
Mounting kit for Lenco trim cylinders. Includes stainless steel and delrin mounting parts.
- Sold individually, not in pairs
Kampanja
SEPTEMBER SALE!
The StingRay Classic 2 Senior Hydrofoil is designed to level the boat at lower speeds, resulting in significant fuel savings. The effective stabilization improves driving safety and makes boating more comfortable, especially in variable conditions.
For boats towing water skiers and wakeboarders, the StingRay Classic 2 Senior Hydrofoil offers a clear advantage. It helps get towed vehicles into the water faster and improves operator visibility by lowering the bow of the boat faster during acceleration.
The drag-reducing wing design ensures maximum top speed, and the discreet graphics send a stylish yet clear message that your boat is equipped with the latest technology from the world's leading hydrofoil manufacturer, StingRay Hydrofoils.
The industry's safest and easiest 4-bolt installation method brings peace of mind to boating. The attachment is very sturdy and the stabilizer cannot come loose from the engine. The StingRay Classic 2 Senior Hydrofoil improves boat performance and quickly pays for itself in fuel savings, making it one of the best performance-enhancing accessories for your boat.
Lifting platform
- Level 1: Intermediate
- Level 2: Intermediate
- Level 3: Maximum
Features
- Fits most outboards and drives
- Recommended power range: 40–300 hp
- Gets the boat on plan faster
- Allows for planing at lower speeds
- Reduces or eliminates cavitation and improves stability
- Saves fuel and pays for itself quickly
- Improves driver visibility
- Can increase the boat's top speed
- Sturdy and secure 4-bolt installation
- Recommended for all types of boats
- Saves fuel
- Improves driver visibility
- Ensures a more stable ride
Kampanja
SEPTEMBER SALE!
The StingRay XR4 is the top model in the StingRay hydrofoil series with the highest lift capacity. It is suitable for engines from 40 to 300 hp. The XR4 offers exceptional performance, very good lift and effective stabilization even for smaller engines.
StingRay XR4 benefits:
- Faster onboarding
- Allows for lower planning speeds
- Stable operation
- Saves fuel
- Reduces cavitation
- Helps when pulling water skis, water toys and water boards
- Faster onboarding
- 40–300hp
- Saves fuel
Kampanja
Trim plate that fits the Uflex Compact trim plate series.
- Width: 304mm
- Depth: 304mm
- Suitable boat length: 5.2-9.2m
- Trimming plates
- For Ultraflex Compact
- Boat length: 5.2-9.2m
- 2pcs discs
Kampanja
Ultraflex trim cylinder.
- Cylinder dimensions min/max: 273-330mm
- Cable length: 1m
- Stroke length: 57mm
- Voltage: 12V
Dimensions in the picture:
- A = 27mm
- W = 330mm
- C = 83mm
- AC12 cylinder
- short model 273mm
Kampanja
SEPTEMBER SALE!
The StingRay STINGER is the entry-level model in Stingray's 'no drill' hydrofoil line. It is suitable for engines starting at 4 horsepower and continuing up to 300 hp. Engines over 40 hp can use StingRay's unique 'No-drill' system. Engines under 40 hp will require drilling holes to mount the Stinger. The 'lift' and surface area of ??the Stinger is slightly less than the slightly larger Starfire model. Despite its size, the Stinger significantly improves the boat's performance.
StingRay's 'no drill' foils make installation on a brand new engine easier because the warranty is still valid unlike if holes have been made in the engine.
- Suitable for 4hp - 300hp outboard motors
- The boat glides faster
- Reduces bow lift problem
- More stable running
- Saves fuel
- Helps when pulling water skis, tires and wakeboards.
Kampanja
SEPTEMBER SALE!
StingRay STARFIRE is suitable for engines between 40-300hp
Simple installation with StingRay's unique "No-drill" system. STARFIRE offers excellent performance, good lifting capacity, high top speed and effective stabilization at an affordable price. Install STARFIRE and experience a clearly improved performance.
StingRays hydrofoil advantages:
- I glide faster
- Reduces bow lift problem
- More stable running
- Saves fuel
- Helps when towing water skis, tires and wakeboards.
- 4-300hp
- Faster rise to the plan
- Saves fuel
Kampanja
Self-adjusting trim level set with composite board
Improve your boat's handling characteristics in a very affordable way. The Smart Tab SX is suitable for 12-16 foot powerboats. The Smart Tab SX is fully automatic and requires no manual adjustment during operation. The gas spring ensures that the stern is raised by keeping the trim level down during acceleration. The degree of lift is determined by the gas spring load and the trim level adjustment, which is made during installation.
The Smart Tab SX pivots downward at an angle to maximize lift at low speeds. As the boat accelerates, the water pushes the trim tab upward, resulting in a lift of the stern and rapid leveling of the boat. When the water pressure exceeds the gas spring’s load rating (maximum height), the trim tab will return to a horizontal position to avoid drag.
Advantages of Smart Tab SX
- Smoother and faster acceleration - (good for water skiing, for example).
- 40% less bow lift and an average of 35% faster planing speed.
- Higher top speed and more stable ride.
- Improved fuel economy up to (11% +)
NOTE! Read the instructions/documentation on choosing the right Smart Tab, as it differentiates between 2-stroke and 4-stroke engines with the same engine power.
- Self-adjusting trim level
- Faster to plan
- For 12-16 foot boats
- Spring force: 18Kg
- Color code: red
- 40-80hp
Kampanja
Self-adjusting trim level set with composite board
Improve your boat's handling characteristics in a very affordable way. The Smart Tab SX is suitable for 15-20 foot powerboats. The Smart Tab SX is fully automatic and requires no manual adjustment during operation. The gas spring ensures that the stern is raised by keeping the trim level down during acceleration. The degree of lift is determined by the gas spring load and the trim level adjustment, which is made during installation.
The Smart Tab SX pivots downward at an angle to maximize lift at low speeds. As the boat accelerates, the water pushes the trim tab upward, resulting in a lift of the stern and rapid leveling of the boat. When the water pressure exceeds the gas spring’s load rating (maximum height), the trim tab will return to a horizontal position to avoid drag.
Advantages of Smart Tab SX
- Smoother and faster acceleration - (good for water skiing, for example).
- 40% less bow lift and an average of 35% faster planing speed.
- Higher top speed and more stable ride.
- Improved fuel economy up to (11% +)
NOTE! Read the instructions/documentation on choosing the right Smart Tab, as it differentiates between 2-stroke and 4-stroke engines with the same engine power.
- Self-adjusting trim level
- Faster to plan
- For boats 15-20 feet
- Spring force: 27Kg
- Color code: blue
- 60-150hp
Kampanja
Self-adjusting trim level set with composite board
Improve your boat's handling characteristics in a very affordable way. The Smart Tab SX is suitable for 18-22 foot powerboats. The Smart Tab SX is fully automatic and requires no manual adjustment during operation. The gas spring ensures that the stern is raised by keeping the trim level down during acceleration. The degree of lift is determined by the gas spring load and the trim level adjustment, which is made during installation.
The Smart Tab SX pivots downward at an angle to maximize lift at low speeds. As the boat accelerates, the water pushes the trim tab upward, resulting in a lift of the stern and rapid leveling of the boat. When the water pressure exceeds the gas spring’s load rating (maximum height), the trim tab will return to a horizontal position to avoid drag.
Advantages of Smart Tab SX
- Smoother and faster acceleration - (good for water skiing, for example).
- 40% less bow lift and an average of 35% faster planing speed.
- Higher top speed and more stable ride.
- Improved fuel economy up to (11% +)
NOTE! Read the instructions/documentation on choosing the right Smart Tab, as it differentiates between 2-stroke and 4-stroke engines with the same engine power.
- Self-adjusting trim level
- Faster to plan
- For boats 18-22 feet
- Spring force: 36Kg
- Color code: black
- 150-240hp
Trim tabs are installed on the outboard motor's cavitation plate and help the boat to glide. Fits practically all outboard motors and outboard boats. The trim tab helps your boat to go easier and lighter. Thanks to the large wings, the boat needs significantly less trimming. Separate installation instructions are included with the device. This model is suitable for engines up to 50hp.
- For outboard motors under 50hp
- Suitable for all brands
- Size 194 x 174 mm
Kampanja
Cylinder with 5/16" hole – Lenco
This durable and efficient standard cylinder is designed for use with Lencó electric trim tabs. The cylinder is made of UV-resistant Celanex plastic, making it ideal for harsh marine conditions. Double cylinder seals and a stainless steel piston ensure long service life and excellent corrosion protection.
The cylinder has a pulling and pushing force of 250 kp, and a 57 mm stroke length allows for quick and precise adjustment of trim levels.
Specifications
- Material: UV-resistant Celanex
- Piston: Stainless steel
- Voltage: 12V
- Traction/thrust force: 250 kp
- Stroke length: 57 mm (2-1/4")
- Total length: 300 mm
- Mounting hole: 5/16"
- Cable length: 1.83 m
- Compatibility: Lenco Standard, Lenco Edge Mount, Lenco Standard Performance
- Standard cylinder 101.
- Stroke length 57 mm
- power cord 1.80 m (plug and play connectors)
- For 7.9 mm pins.
- 12 years old.
Kampanja
SEPTEMBER SALE!
Trim tabs are installed on the outboard motor's cavitation plate and help the boat to glide. Fits practically all outboard motors and outboard boats. The trim tab helps your boat to go easier and lighter. Thanks to the large wings, the boat needs significantly less trimming. Separate installation instructions are included with the device. This model is suitable for engines over 50hp.
- For outboard motors over 50hp
- Suitable for all brands
- Size 264 x 216mm
Kampanja
AT12 cylinder, long model (309 mm)
The AT12 cylinder is part of Uflex's electromechanical trim level system, which improves the boat's fuel economy and increases travel comfort. Adjusting the trim levels is easily done with a joystick controller that controls both levels simultaneously.
When correcting side tilt, the system works intelligently by raising one trim level while lowering the opposite level, ensuring a balanced and stable ride.
The cylinders are easy to install thanks to quick-release brackets. The patented bracket design protects the electrical cable from external damage, and only one small hole needs to be drilled in the transom for the electrical cable per cylinder.
Specifications
- Cylinder length (without brackets): 309 mm
- Stroke length: 57 mm
- Protection class: IP68 (waterproof)
- Operating voltage: 12 V
NOTE: This product includes the cylinder only. Trim tabs, guide and other accessories are sold separately.
- Easy and quick installation with quick-release fasteners
- Patented bracket protects the electrical cable from damage
- Only one transom feed-through hole per cylinder
- Suitable for Uflex electromechanical trim tabs
Kampanja
SEPTEMBER SALE!
A pair of unpolished stainless steel trim plates.
- Length: 304.8mm
- Width: 228.6mm
