Orbitrade Marine rubber membrane for Volvo Penta S-drive drives. The rubber membrane (hull/groove rubber sheet) forms a watertight and flexible connection between the hull and the S-drive, and is a critical part of the boat's safety.
Product type: Rubber membrane / frame grommet rubber sheet
Manufacturer: Orbitrade
OEM number: 22303438
Former OEM number: 854932
Fits the following Volvo Penta S-drive drives:
120S series
120S-A
120SB
120S-C
120S-D
120S-E
130S series
130S-A
130S-B
130SR-A
130SR-B
150S series
150S-A
150S-B
150SR-A
150SR-B
Lightly sand both adhesive surfaces with sandpaper.
Clean the surfaces thoroughly with acetone.
Apply solvent-based contact adhesive (e.g. Illbruck CT050 ) to both surfaces
Let the glue dry until the surface is almost tack-free.
Press the rubber membrane carefully against the frame.
Press firmly, especially around the edges, to ensure optimal adhesion.
The rubber diaphragm is a safety-critical part and should be replaced according to the manufacturer's maintenance schedule.
Worn, hardened or cracked membrane should be replaced immediately.
Recommended to be replaced whenever the S-drive is removed.
Orbitrade Marine rubber membrane for Volvo Penta S-drive drives. The rubber membrane (hull/groove rubber sheet) forms a watertight and flexible connection between the hull and the S-drive, and is a critical part of the boat's safety.
Product type: Rubber membrane / frame grommet rubber sheet
Manufacturer: Orbitrade
OEM number: 22303438
Former OEM number: 854932
Fits the following Volvo Penta S-drive drives:
120S series
120S-A
120SB
120S-C
120S-D
120S-E
130S series
130S-A
130S-B
130SR-A
130SR-B
150S series
150S-A
150S-B
150SR-A
150SR-B
Lightly sand both adhesive surfaces with sandpaper.
Clean the surfaces thoroughly with acetone.
Apply solvent-based contact adhesive (e.g. Illbruck CT050 ) to both surfaces
Let the glue dry until the surface is almost tack-free.
Press the rubber membrane carefully against the frame.
Press firmly, especially around the edges, to ensure optimal adhesion.
The rubber diaphragm is a safety-critical part and should be replaced according to the manufacturer's maintenance schedule.
Worn, hardened or cracked membrane should be replaced immediately.
Recommended to be replaced whenever the S-drive is removed.