Volvo Penta
Volvo Penta -ryhmän tuotteet

Drive storage bag Volvo Penta and MerCruiser
A Swedish-made drivetrain storage bag for winter engine storage. The bag is made of transparent and UV-protected vinyl plastic. The durable and sturdy construction makes winter storage of inboard engines easier, and the pre-shaped construction and shaped seams ensure a good fit and reduce the need for storage fluid.
Features
Transparent and UV protected material
Durable and long-lasting construction
Pre-shaped design for the best fit
Reduces the amount of preservation liquid needed
Structure and equipment
Material: strong transparent vinyl plastic
Emptying and filling:
Drain valve with shut-off valve at the bottom
Gardena male connector for easy filling and emptying
Format support:
2 PVC pipes to maintain the shape of the bag
Fastening:
4 fastening straps for the towing device
Sizes and compatibility
Size 1:
Alpha One
Volvo Penta AQ200 290SP
Size 2:
MerCruiser Bravo
Volvo Penta DuoProp
How do I use a traction device bag?
1. Remove the propeller.
2. Install the traction bag so that both tubes are placed on top of the cavitation plate. See illustration.
3. Install the drive bag so that the loose flap is at the back. The flap prevents the cooling water from splashing during the test drive.
4. Attach the tie-down straps in at least three places. The tie-down straps prevent the towbar bag from coming loose during a test drive when the antifreeze has been filled into the bag.
5. You can fill in antifreeze through the opening in the flap. Check that the drain valve is closed!
6. Check that the liquid level is above the suction valve so that the impeller does not dry out and become damaged.
7. Test run the engine, then turn it off after a few seconds and check the fluid level.
8. If the fluid level is still above the intake valve, restart the engine and let it run for a few minutes. If your engine is fully seawater cooled, the engine should be run for longer than a few minutes. Alternatively, you can remove the thermostat before running it.
9. When the preservative run is complete, you can drain the antifreeze/glycol mixture through the drain valve directly into a collection container. You can easily store the mixture for next time/year. However, it is a good idea to check the freezing point of the liquid and add Anti Freeze concentrate if necessary.
- Transparent bag
- For autumn and spring maintenance
- For engine flushing

Engine oil VDS-4.5 Volvo Penta 5 liters
Genuine Volvo Penta 15W-40 VDS-4.5 diesel engine oil is designed to provide excellent protection and optimal lubrication for marine engines. This oil has been developed to meet the demanding conditions of the marine environment and to ensure reliable performance even under heavy use.
Volvo Penta 15W-40 engine oil is compatible with previous classifications (VDS-2, VDS-3 and VDS-4) and provides excellent protection against wear, deposits and oxidation, ensuring smooth and reliable engine operation over the long term. The oil is also suitable for older Volvo Penta diesel engines and some gasoline engines (see operating instructions).
Features and benefits
For Volvo Penta diesel engines: Especially suitable for engines such as D4–D7 and provides reliable protection and performance for heavy-duty engines.
Improved engine protection: Long-lasting protection against wear and prolonging engine life by preventing deposits and oxidation.
High performance: Maintains its power even in extreme temperatures and heavy operating conditions.
Recommended use
Volvo Penta 15W-40 VDS-4.5 is suitable for both commercial vessels and recreational boats operating in demanding conditions. The oil is recommended for engines that have previously used VDS-2, VDS-3 or VDS-4 rated oils, and ensures high reliability and performance even in the most demanding conditions.
Specifications
SAE grade: 15W-40
Capacity: 5 liters
Volvo OEM: 23909459
Approvals and ratings
API: CK-4, CJ-4, CI-4 Plus, CI-4
ACEA: E9, E7
Volvo Penta: VDS-4.5 (also compatible with VDS-2, VDS-3 and VDS-4)
- 15W/40
- VDS-4.5
- 5 liters
- OEM 23909459

Volvo Penta fuel filter
Fuel filter for Volvo Penta engines. Ensures clean fuel supply and protects the injection and fuel system from impurities.
OEM number: 3581078
Compatibility (consolidated)
2000 series
2001, 2002, 2003 (incl. AG, B, BG, D, R, SOLAS, T, TB, TR)
AQD / AQ series
AQD21A, AQD21B, AQD70B
AQ115A/B, AQ130A/B/C/D, AQ165A, AQ170A/B/C
D-series
D1-13 / 20 / 30 (A, B, F)
D2-40/55/75 (several sub-versions)
D3-110 / 130 / 160 / 190 (A and I versions)
MD series
MD2010–MD2040 (A–D)
MD21A/B, MD22A/L/P
MD5A/B/C
MD70B, MD70BK
TAMD / TMD
TAMD22P-B, TAMD70B, THAMD70B
TMD22A/B/PC, TMD70B
B / BB / MB
B20
BB115A/B/C, BB165A, BB170A/B/C
MB20A/B/C
- Volvo Penta fuel filter
- Original part
- OEM 3581078

Volvo Penta oil filter
Original Volvo Penta oil filter, OEM number 3840525 .
Suitable for the following engines:
MD2030 series: MD2030, MD2030B, MD2030C, MD2030D
MD2040 series: MD2040, MD2040B, MD2040C, MD2040D
D1 series: D1-30
D2 series: D2-40, D2-55, D2-75
- Oil filter
- For Volvo Penta MD2030, MD2040, D1 & D2 models
- Original part

Engine oil VDS-4.5 Volvo Penta 20 liters
Genuine Volvo Penta 15W-40 VDS-4.5 diesel engine oil is designed to provide excellent protection and optimal lubrication for marine engines. This oil has been developed to meet the demanding conditions of the marine environment and to ensure reliable performance even under heavy use.
Volvo Penta 15W-40 engine oil is compatible with previous classifications (VDS-2, VDS-3 and VDS-4) and provides excellent protection against wear, deposits and oxidation, ensuring smooth and reliable engine operation over the long term. The oil is also suitable for older Volvo Penta diesel engines and some gasoline engines (see operating instructions).
Features and benefits
For Volvo Penta diesel engines: Especially suitable for engines such as D4–D7 and provides reliable protection and performance for heavy-duty engines.
Improved engine protection: Long-lasting protection against wear and prolonging engine life by preventing deposits and oxidation.
High performance: Maintains its power even in extreme temperatures and heavy operating conditions.
Recommended use
Volvo Penta 15W-40 VDS-4.5 is suitable for both commercial vessels and recreational boats operating in demanding conditions. The oil is recommended for engines that have previously used VDS-2, VDS-3 or VDS-4 rated oils, and ensures high reliability and performance even in the most demanding conditions.
Specifications
SAE grade: 15W-40
Capacity: 20 liters
Volvo OEM: 23909459
Approvals and ratings
API: CK-4, CJ-4, CI-4 Plus, CI-4
ACEA: E9, E7
Volvo Penta: VDS-4.5 (also compatible with VDS-2, VDS-3 and VDS-4)
- 15W/40
- VDS-4.5
- 20 liters
- OEM 23909459

Complete service kit for Volvo Penta 2001–2003 diesel engines , including all necessary original filters and impeller seals for regular engine maintenance. Service kit, OEM number 877194.
Contents:
1 × Oil filter ( 22057107 )
1 × Fuel filter ( 21492771 )
1 × Impeller set ( 21951342 )
Fits the following Volvo Penta engines:
Diesel engines 2001 , 2002 and 2003
The kit includes genuine Volvo Penta parts that ensure perfect compatibility, optimal performance and reliable engine operation in all conditions.
- Volvo Penta service kit
- For engines: 2001-2003
- Volvo Penta OEM No.: 877194
- Impeller 21951342
- Fuel filter 21492771
- Oil filter 22057107

Volvo Penta fuel filter
OEM number: 861477
Suitable for many small Volvo Penta diesel engines, especially D1–D2 and original MD series engines.
Fits the following Volvo Penta engines
D1 series
D1-13, D1-13B, D1-13F
D1-20, D1-20B, D1-20F
D1-30, D1-30B, D1-30F
D2 series
D2-40, D2-40B, D2-40F
D2-50F
D2-55, D2-55B, D2-55C, D2-55D, D2-55E, D2-55F
D2-60F
D2-75, D2-75B, D2-75C, D2-75F
MD series
MD2010, MD2010B, MD2010C, MD2010D
MD2020, MD2020B, MD2020C, MD2020D
MD2030, MD2030B, MD2030C, MD2030D
MD2040, MD2040B, MD2040C, MD2040D
- Volvo Penta fuel filter
- Original part
- OEM 861477

Volvo Penta oil filter
Genuine Volvo Penta oil filter designed to ensure efficient engine oil filtration and reliable engine operation. Fits a range of smaller Volvo Penta diesel engines.
OEM number: 861473
Fits the following engines
MD2010-C
MD2020
MD2020B
MD2020-C
MD2020-D
D1-13
D1-20
Recommended to be replaced at every oil change in accordance with Volvo Penta's maintenance instructions.
- Oil filter
- For Volvo Penta MD2010, MD2020 & D1-13/20 models
- Original part

Coolant Volvo Penta VCS Yellow Glycol
Volvo Penta has gradually switched to a new type of coolant, Volvo Penta Coolant VCS (yellow) . This coolant contains new inhibitors that are specifically designed for the materials in newer engines .
VCS (yellow) offers even better protection:
against corrosion
against the formation of deposits
against cavitation
against galvanic corrosion
Specifications
Product: Volvo Penta Coolant VCS (Yellow)
OEM number: 24712780
Capacity: 1 liter
Color: Yellow
Commissioning in Volvo Penta engines
VCS (yellow) coolant has been introduced in Volvo Penta engines as follows:
D13 Marine: at the turn of the 2010–2011 model years (D13 EVC-D)
D16 Marine: week 27 / 2010
D1, D2, D3: week 19 / 2011
D4 / D6: week 22 / 2011
Important things to note
Never mix VCS or VCS-2 coolant (yellow or orange) with Volvo Penta Coolant Green or other coolants.
Engines designated for VCS or VCS-2 fluid are marked with yellow labels , including a yellow marking surrounding the filler cap.
In some engines it is possible to change from green coolant to yellow/orange , but in this case the entire cooling system must first be drained and flushed thoroughly .
- Concentrate
- Yellow
- 1 liter

Flushing device for Volvo Penta drives
Flushing device for freshwater flushing of the cooling system of Volvo Penta drives. Intended for use during engine maintenance and preparation for winter storage. The device is installed over the cooling water intakes and connected to the freshwater supply.
Use
Freshwater flushing of Volvo Penta drives
Installed over the cooling water intakes
Connects to water hose
Safety instructions
Make sure the motor does not overheat during operation.
Remove the propeller before use.
Always follow the engine manufacturer's instructions.
Attention
A separate hose connector is required for use with a garden hose, product number 7296.
- For Volvo Penta drives
- Type: 959VOL
- For fresh water rinsing

Complete service kit for Volvo Penta D1 and MD20 series diesel engines , including original filters and impeller with seals for regular engine maintenance. Service kit, OEM number 21189380.
Contents:
1 × Fuel filter ( 861477 )
1 × Impeller set ( 22222936 )
1 × Oil filter ( 861473 )
Fits the following Volvo Penta engines:
D1 series:
D1-13A, D1-13B, D1-13F
D1-20A, D1-20B, D1-20F
MD20 series:
MD2010A, MD2010B, MD2010C, MD2010D
MD2020A, MD2020B, MD2020C, MD2020D
The service kit contains only genuine Volvo Penta parts , which guarantee perfect compatibility, engine reliability and long service life.
- Volvo Penta service kit
- For engines: P1-13, P1-20, 2020,2020
- Volvo Penta OEM No.: 21189380
- Impeller 22222936
- Fuel filter 861477
- Oil filter 861473

Bellows set Volvo Penta 120, 130 & 150
Complete bellows kit for Volvo Penta S-drive drives , including a hull counter piece (cover plate). The kit is intended for maintenance or bellows replacement and helps prevent water from entering the boat's hull.
Contents
Bellows set
Cover plate
OEM 21389074
Also includes cover plate 20640 (Volvo 22303438 )
Compatibility
Fits the following Volvo Penta models:
110S *
120 series
120C, 120S-D, 120S-E, 120SC
130 series
130S, 130S-B, 130S-C, 130S-D
130SR, 130SR-A, 130SR-B, 130SR-C, 130SR-D
150 series
150S, 150S-B, 150S-C, 150S-D
150SR, 150SR-B, 150SR-C, 150SR-D
Gearboxes
MS25S-A, MS25SR-A
* Note! For model 110S , seal 20642 (Volvo 853946) is also required, which is not included in the package.
Installation tips for S-drive bellows/rubber sheet
Sand both adhesive surfaces with sandpaper.
Clean the surfaces with acetone
Apply solvent-based contact adhesive (e.g. Illbruck CT050 ) to both surfaces
Wait until the surfaces are almost non-sticky
Press the bellows/rubber plate firmly against the frame.
Press the edges carefully to ensure the best grip.
- Bellows set
- For Volvo Penta 120, 130 and 150 models
- Original part

Coolant Volvo Penta VCS-2 Orange Glycol
Volvo Penta's latest coolant , Volvo Penta Coolant VCS-2 (orange) , has been specially developed for the materials in new engines . The fluid contains modern inhibitors that provide long-lasting and effective protection for the engine cooling system.
VCS-2 protects:
from corrosion
from the formation of precipitates
from cavitation
from galvanic corrosion
Specifications
Product: Volvo Penta Coolant VCS-2 (Orange)
OEM number: 24712786
Capacity: 5 liters
Color: Orange
Compatibility
VCS-2 (orange) replaces and is fully compatible with the previous VCS coolant (yellow) .
Important things to note
Never mix VCS or VCS-2 coolant (yellow/orange) with Volvo Penta Coolant Green or any other coolant.
Engines designated for VCS/VCS-2 fluid are marked with yellow labels , including a yellow marking surrounding the filler cap.
In some engines it is possible to change from green to orange , but in this case the entire cooling system must first be drained and thoroughly flushed .
- Pre-mixed
- Orange
- 5 liters

Fits most Volvo Penta engines
200 series: 230A, 230B, 250A, 250B
AQ series: AQ90–AQ171 (incl. A/B/C/D versions)
B and BB series: B18, B20, BB30, BB100–BB170
MB series: MB18, MB20
D and AD series: AQD21*, MD21*, MD22, MD30, AD31, AQAD31
TAMD / TMD: TAMD22, TAMD30, TAMD31, TMD22, TMD30, TMD31
KAD / KAMD: KAD32, KAMD300
Note:
* Only suitable for engines with engine number up to -103386 .
- Oil filter
- 230-250, AQ90-171, B18-20, BB30-170, D300 and D21-32
- Original part

Fully synthetic engine oil specially developed for high-performance gasoline engines. The oil is suitable for injection engines with and without catalytic converters.
The oil is resistant to wide temperature fluctuations and provides excellent protection against corrosion, sludge formation and deposits. It helps keep the engine clean and reduces wear in demanding operating conditions.
OEM number: 23211288
- 5W/40
- Fully synthetic
- OEM 23211288

Knot bellows Volvo Penta 200–290
Joint protection rubber for Volvo Penta drives. The protection rubber prevents water, dirt and impurities from entering the joint and drive structure, and is an important part of the drive's operational reliability and service life.
Product information
Product type: Joint protection rubber (cardan / joint bellows)
OEM number: 876294
Compatibility
Fits the following Volvo Penta drives:
AQ series
AQ200
AQ250
AQ270, AQ270T
AQ275, AQ275A
AQ280, AQ280T, AQ280PT, AQ280DP
AQ290, AQ290A, AQ290DP, AQ290A-DP
SP series
SP-A, SP-A1, SP-A2
SP-C
SP-E
DP series
DP-A, DP-A1, DP-A2
DP-B, DP-B1
DP-C, DP-C1
DP-D, DP-D1
DP-E
DP-G
DPX series
DPX-S, DPX-S1
DPX-R
DPX-A
- For Volvo Penta AQ200-290 & SP
- Original part

Volvo Penta oil filter
Original Volvo Penta oil filter, OEM number 423135 .
Suitable for the following engines:
KAD42 / KAMD42 series: KAD42A, KAD42B, KAD42P-A, KAMD42A, KAMD42B, KAMD42P-A
KAD43 / KAMD43 series: KAD43P-A, KAMD43P-A
KAD44 / KAMD44 series: KAD44P, KAD44P-B, KAD44P-C, KAMD44P-A, KAMD44P-B, KAMD44P-C
KAD300A
MD70B
- Oil filter
- Volvo Penta D42-D300 & MD70
- Original part

Oil filter Volvo Penta
Oil filter corresponding to OEM number 22057107 .
Previous OEM number: 834337 .
Suitable for Volvo Penta engines
AQD2B
MD series
MD1A, MD1B
MD2, MD2A, MD2B
MD3B
MD5A, MD5B, MD5C
MD6A, MD6B
MD7A, MD7B
MD11C, MD11D
MD17C, MD17D
MB series
MB2A
MB10A
2000 series
2001
2002
2003
2003T
If you want, I can further summarize this for online shopping , group by power class , or add dimensions and technical data .
- Oil filter
- Volvo Penta AQD2, MD1-17, MB2-10, 2001, 2002 & 2003
- Original part

Transmission oil 80W/90 1L – Volvo Penta
High-quality fully synthetic oil for drivetrains and gearboxes. The oil effectively protects gearboxes and reverse gears even under heavy loads. Excellent lubricating properties reduce wear and ensure reliable operation. In addition, the oil provides good protection against rust and corrosion. Withstands high temperatures without losing its properties.
Viscosity: SAE 80W/90
Quality classification: API GL-5
Suitable for use in: Drivetrains and reverse gears
OEM number: 3809446
Package size: 1L
Especially suitable for Volvo Penta systems.
- 80W/90
- Synthetic
- OEM 3809446

