Volvo Penta other spare parts
Volvo Penta other spare parts -ryhmän tuotteet
Gasket kit for seawater pump Volvo Penta MD and D series
Gasket kit for the seawater pump for selected Volvo Penta MD and D series engines. The kit includes all necessary gaskets and sealing rings that ensure the pump is leak-proof and a reliable flow of cooling water to the engine.
When replacing the impeller or servicing the seawater pump, the gaskets and packing glands should always be replaced. Worn gaskets can cause water leaks, air entry into the system, and reduced cooling, which can lead to engine overheating.
Product information
- Fits seawater pump OEM 3593654
- Includes all necessary gaskets and packing glands for maintenance
Contents
- 1 pc gasket 840385
- 1 piece gasket 819959
- 1 pc O ring 925055
- 2 pcs sealing sleeve 833996
Compatibility
Fits the following Volvo Penta engines:
MD series
- MD2010-C
- MD2010-D
- MD2020-C
- MD2020-D
- MD2030
- MD2030B
- MD2030-C
- MD2030-D
- MD2040
- MD2040B
- MD2040-C
- MD2040-D
D series
- D1-30
- D1-30B
- D1-30F
- D2-40
- D2-40B
- D2-40F
- Seawater pump gaskets
- Volvo Penta MD2010-2040, D1 & D2
- Accessory part
The bearing pin (sleeve pin) suitable for Volvo Penta is an important spare part and acts as a support shaft for the drive shaft. This bearing pin ensures stable operation and correct positioning of the fork in the shield, which promotes smooth running and reduces wear on the moving parts of the drive shaft.
This Orbitrade bearing pin corresponds to OEM numbers 853175 and 897831 and meets high quality and safety standards.
Fits the following Volvo Penta drives:
200
250
270
275
280
285
290, 290A
SP-A, SP-A1, SP-A2, SP-A/MT
DP-A, DP-A1, DP-A2, DP-B, DP-B1
DPX
- Bearing pin
- For Volvo Penta engines 200-290, SP and DP
- Corresponds to the original 897831
This seawater pump seal kit is designed for Volvo Penta D2 series engines. The kit includes all the necessary gaskets and seals to ensure proper sealing of the seawater pump and thus reliable flow of cooling water to the engine.
When replacing or reconditioning a seawater pump, it is very important to always replace the seals and packing glands. Worn seals can lead to water leaks, air ingress, or reduced cooling, which in the long run can cause the engine to overheat.
* Includes and replaces original parts:
* 3583809
* 827247
* 925057
* 3583992
Fits the following engines
D2 series
* D2-50F
* D2-55A
* D2-55B
* D2-55C
* D2-55D
* D2-55E
* D2-55F
* D2-60F
* D2-75A
* D2-75B
* D2-75C
- Seawater pump seals
- For Volvo Penta D2
- Orbitrade accessory part
Orbitrade flapless bellows suitable for Volvo Penta engines in the 200-290 series and the SP, DP and DPX models listed below. The bellows are supplied with ABA hose clamps and are of high quality and are equivalent to the original.
The bellows must be replaced according to the operating device instructions.
Corresponds to OEM numbers 876631 and 875848.
Fits the following Volvo Penta drives:
200, 250
270, 270T, 275
280, 280T, 280DP, 285A
290, 290A, DP290A, 290DP
SP-A, SP-A/MT, SP-A1, SP-A2
SP-C, SP-C1
SP-E
DP-A, DP-A1, DP-A2
DP-B, DP-B1
DP-C, DP-C1
DP-D, DP-D1
DP-E
DPX-C, DPX-R, DPX-S1
- Bellows rubber without flap
- For Volvo Penta 200-290 & SP, DP engines
- Corresponds to OEM 876631
- Orbitrade accessory part
Orbitrade exhaust bellows with built-in flaps. Fits Volvo Penta engines in the 200-290 series and the SP, DP and DPX models listed below. The bellows is supplied with ABA hose clamps and is of high quality, equivalent to the original.
The bellows must be replaced according to the operating device instructions.
Corresponds to OEM numbers 876633, 875828, 875829 and 850004.
Fits the following Volvo Penta drives:
200, 250
270, 270T, 275
280, 280T, 280DP, 285A
290, 290A, DP290A, 290DP
SP-A, SP-A/MT, SP-A1, SP-A2
SP-C, SP-C1
SP-E
DP-A, DP-A1, DP-A2
DP-B, DP-B1
DP-C, DP-C1
DP-D, DP-D1
DP-E
DPX-C, DPX-R, DPX-S1
- Exhaust bellow with flaps
- Volvo Penta 200-290 & SP, DP
- Corresponds to OEM 876633
Orbitrade bellows, suitable for the Volvo Penta DPH, DPR and DPI engines listed below. The bellows is supplied with hose clamps and is of high quality, identical to the original.
The bellows must be replaced according to the operating device instructions.
Corresponds to OEM number 3588753.
Fits the following Volvo Penta drives:
DPH-A, DPH-B, DPH-C, DPH-D, DPH-D1, DPH-E
DPR-A, DPR-B, DPR-C, DPR-D
DPI-A
- Exhaust pipe bellow
- Volvo Penta DPH, DPR & DPI
- Corresponds to OEM 3588753
Orbitrade drive joint bellows rubber, suitable for the Volvo Penta DPH, DPR and DPI drives listed below. The bellows are supplied with ABA hose clamps and are of high quality and are equivalent to the original.
The bellows must be replaced according to the technical specifications of the drive unit to prevent water from entering the drive unit joint.
Corresponds to OEM numbers 3808898 and 3594509.
Fits the following Volvo Penta drives:
DPH-A, DPH-B, DPH-C, DPH-D, DPH-D1, DPH-E
DPR-A, DPR-B, DPR-C, DPR-D
DPI-A
- Bellow
- Volvo Penta DPH, DPR & DPI
- Corresponds to OEM 3594509
The fuel pump supplies diesel to the engine. It is often mounted on the side of the engine and pumps diesel from the tank to the injection pump. In many models, the fuel pump is driven by the engine camshaft.
It is extremely important that the fuel pump is in good condition and working as intended. If you are unsure about the condition of the pump, replace it!
The fuel pump is often called the feed pump and should not be confused with the injection pump, which distributes fuel to the various cylinders.
This fuel pump corresponds to the original number 859428 and is designed specifically for the following engine versions:
2001, 2001B, 2001AG, 2001BG, 2001D, 2001R
2002, 2002B, 2002D, 2002AG, 2002BG
2003, 2003 SOLAS, 2003B, 2003B-SOLAS, 2003D, 2003R, 2003R SOLAS
2003T, 2003TB, 2003TB SOLAS, 2003TR
NOTE! The fuel pump is a relatively new model (check the original number or compare to the picture)
- Fuel pump for newer models
- For Volvo Penta 2001-3 model
- Equivalent to OEM 859428
Fuel pump for diesel engines
The fuel pump supplies diesel from the tank to the engine and is usually mounted on the side of the engine. Its function is to pump fuel to the injection pump. In many engines, the pump is driven by the camshaft.
It is important that the fuel pump is in good condition and working properly. In case of doubt, it is recommended to replace the pump to avoid malfunctions and possible damage.
The fuel pump is often called a transfer pump. It should not be confused with the injection pump, which distributes fuel to the cylinders.
Product information
Corresponds to the original part with OEM number 21132189.
Compatibility
Suitable for the following engines:
- D1-13
- D1-13B
- D1-13F
- D1-20
- D1-20B
- D1-20F
- D1-30
- D1-30B
- D1-30F
- D2-40
- D2-40B
- D2-40F
- D2-50F
- D2-55
- D2-55B
- D2-55C
- D2-55D
- D2-55E
- D2-55F
- D2-60F
- D2-75
- D2-75B
- D2-75C
- D2-75F
- OEM 21132189
- Volvo Penta D1 & D2
Fuel pump for D2-50 and D2-55 engines
The fuel pump supplies diesel from the tank to the engine and is usually mounted on the side of the engine. Its function is to pump fuel to the injection pump. In many engines, the pump is driven by the camshaft.
It is important that the fuel pump is in good condition and working properly. In case of doubt, it is recommended to replace the pump to avoid malfunctions and possible damage.
The fuel pump is also called a transfer pump. It should not be confused with the injection pump, which distributes fuel to the cylinders.
Product information
- Corresponds to the original part with OEM number 3580100
Compatibility
Suitable for the following engines:
- D2-50F
- D2-55
- D2-55A
- D2-55B
- D2-55C
- D2-55D
- D2-55E
- D2-55F
- MD2010
- MD2010A
- MD2010B
- MD2010C
- MD2010D
- MD2020
- MD2020A
- MD2020B
- MD2020C
- MD2020D
- MD2030
- MD2030A
- MD2030B
- MD2030C
- MD2030D
- MD2040
- MD2040A
- MD2040B
- MD2040C
- MD2040D
- OEM number: 3580100
- For D2-50 and D2-55 engines
Seal kit for gear mechanism Volvo Penta DPH and DPR
High quality Orbitrade seal kit for the gear mechanism of Volvo Penta DPH and DPR drives. The kit includes the necessary seals and sealing rings that ensure proper tightness and prevent oil and water leaks.
A gasket set is an important part of maintenance or demolition work, as worn or old gaskets can cause malfunctions, internal corrosion and oil leaks.
Compatibility
Fits the following Volvo Penta drives:
- DPH-A
- DPH-C
- DPH-D
- DPH-D1
- DPH-E
- DPR-A
- DPR-B
- DPR-C
- DPR-D
- Complete seal kit for the gear mechanism
- Manufacturer Orbitrade
- Corresponds to OEM numbers 3863085, 945624, 17276, 951936
- Designed to ensure reliable sealing and long service life
- Original spare part
- Fits D3 engines
- OEM: 21368879
Exhaust bellows Volvo Penta DP-G & DPX
Exhaust bellows for Volvo Penta drives , designed to safely direct exhaust gases through the drive and prevent water from entering the system.
Fit
Fits the following Volvo Penta drives:
DP-G
DPX-A
Product information
Product type: Exhaust bellows
Application: Drivetrain exhaust system
OEM number: 3860384
Attention
The exhaust bellows is a wearing part that should be checked regularly.
A cracked or hardened bellows can cause water leakage and serious damage to the drive unit.
- Original part
- Volvo Penta DP-G & DPX-A
- OEM 3860384
Oil screw seals
Seal kit for the oil plug for Volvo Penta drives. The seals ensure the tightness of the oil plug and prevent oil leaks after maintenance and oil changes.
Fit
Fits the following Volvo Penta drives:
DPH series
DPH-A
DPH-B
DPH-C
DPH-D
DPH-D1
DPH-E
DPI series
DPI-A
DPR series
DPR-A
DPR-B
DPR-C
- Product type: Oil screw seal kit
- Application: Oil plug (drive unit)
- Purpose: Prevents oil leaks during maintenance
Oil screw seals
Seal kit for oil plug for Volvo Penta drives and saildrives. The seals ensure the tightness of the oil screw and prevent oil leaks after maintenance.
Fit
Fits the following Volvo Penta models:
AQ80
AQ100A
AQ100B
AQ100S
Saildrive 100S
Saildrive 110S
- Product type: Oil screw seal kit
- Application: Drive / saildrive oil plug
- Intended use: Preventing oil leaks during maintenance and oil changes
Oil screw seals
Seal kit for the oil plug for Volvo Penta drives. The seals ensure the tightness of the oil screw and prevent oil leaks after maintenance.
Fit
Fits the following Volvo Penta Saildrive models:
120C-D
120S
120S-B
S120C
- Product type: Oil screw seal kit
- Application: Saildrive drive oil plug
- Intended use: Preventing oil leaks during maintenance
Fitting kit for drive unit Volvo Penta DPH & DPR
A set of fittings for hanging the towbar on the plate. The fittings wear out over time, which can cause play in the towbar suspension and reduce the driving feel and increase wear on other parts.
High-quality Orbitrade spare part, designed specifically for Volvo Penta's DPH and DPR series drives.
Fit
Fits the following Volvo Penta drives:
DPH
DPR
More specifically:
DPH-A
DPH-B
DPH-C
DPH-D
DPH-D1
DPH-E
DPR-A
DPR-B
DPR-C
DPR-D
Product information
Product type: Bushing kit / bushing kit
Application: Suspension of the towing device on the shield
Manufacturer: Orbitrade
OEM number: 3862903
Things to note
Worn bushings can cause:
clearance in the drivetrain
vibration and imprecise steering
increased wear on other suspension parts
Recommended for inspection during maintenance or when removing the drivetrain
- Transmission bushing kit
- Volvo Penta DPH and DPR
- Orbitrade
Fitting kit for drive unit Volvo Penta 80–285 & SP-A
A set of fittings for hanging the towbar on the plate. The fittings wear out over time, which can cause play in the towbar suspension and reduce the driving feel and increase wear on other parts.
A high-quality Orbitrade spare part that fits several earlier generations of Volvo Penta drive units.
Fit
Fits the following Volvo Penta drives:
AQ80
AQ100, AQ100B
AQ200
AQ250
AQ270
AQ275, AQ275A
AQ280, AQ280L, AQ280DP, AQ280PT
AQ285A
SP-A / MT *
OEM numbers
826341
876278
(note: 826341 appears twice in the original entry)
Alternative product and note
* Alternative product: part no. 82563
Use if OEM number is unknown
Measure the outside diameter of the current fitting
Outer diameter: Ø 45 mm
Product information
Product type: Bushing kit / bushing kit
Application: Suspension of the towing device on the shield
Manufacturer: Orbitrade
Things to note
Worn bushings can cause:
clearance in the drivetrain
vibration and imprecise steering
increased wear on other suspension parts
Recommended for inspection and replacement during maintenance or removal of the drive unit
- Transmission bushing kit
- Volvo Penta 80, 100, 200, 250, 270, 275, 280, 285 and SP-A
- Orbitrade
Fitting kit for drive unit Volvo Penta 290, SP & DP
A set of fittings for hanging the towbar on the plate. The fittings wear out over time, which can cause play in the towbar suspension and reduce the driving feel and increase wear on other parts.
High-quality Orbitrade spare part that fits Volvo Penta 290, SP and DP series drives.
Fit
Fits the following Volvo Penta drives:
290 series
AQ290
AQ290A
AQ290DP
SP series
SP-A*
SP-A1
SP-A2
SP-E**
DP series
DP-A
DP-A1**
DP-A2
DP-B
DP-B1
DP-C**
DP-C1**
DP-D1**
OEM numbers
853223
876279
- Transmission bushing kit
- Volvo Penta drive 290, SP and DP
- Orbitrade
D3D3-110I-D, D3-110I-E, D3-110I-F, D3-110I-G, D3-110I-HD3-140A-D, D3-140A-E, D3-140A-F, D3-140A-1-G, D3-H-140 D3-140I-E, D3-140I-F, D3-140I-G, D3-140I-HD3-150I-D, D3-150I-E, D3-150I-F, D3-150I-G, D3-150I-HD3,170A-1-D D3-170A-G, D3-170A-H, D3-170I-D, D3-170I-E, D3-170I-F, D3-170I-G, D3-170I-HD3-200A-D, D3-200A-E, D3-F,A-200A,- D3-200A-H, D3-200I-D, D3-200I-E, D3-200I-F, D3-200I-G, D3-200I-HD3-220A-D, D3-220A-E, D3-220A-F, D3-20,220A-A D3-220I-D, D3-220I-E, D3-220I-F, D3-220I-G, D3-220I-HD4D4-180I-B, D4-180I-C, D4-180I-D, D4-180I,E, D4-4-A-180 D4-210A-B, D4-210I-A, D4-210I-BD4-225A-B, D4-225A-C, D4-225A-D, D4-225A-E, D4-225A-F, D4-225I-B, D4-I D25,225-I-C D4-225I-FD4-260A-A, D4-260A-B, D4-260A-C, D4-260A-D, D4-260A-E, D4-260A-F, D4-260D-B, D4-260D-C, D4-D40,260-D-D D4-260I-A, D4-260I-B, D4-260I-C, D4-260I-D, D4-260I-E, D4-260I-FD4-300A-A, D4-300A-C, D4-300A-D, D4-E0,300A,-D D4-300D-C, D4-300D-D, D4-300D-E, D4-300D-F, D4-300D-F, D4-300I-A, D4-300I-C, D4-300I-D, D4-300I-E, FD4-A3060I D6-280A-B, D6-280A-C, D6-280A-D, D6-280A-E, D6-280I-A, D6-280I-B, D6-280I-C, D6-280I-D, D6-280I-ED6-D6-300A,3-F D6-300I-FD6-310A-A, D6-310A-B, D6-310A-C, D6-310A-D, D6-310A-E, D6-310D-B, D6-310D-C, D6-310D-D, D6-E,310-I-16 D6-310I-C, D6-310I-D, D6-310I-ED6-330A-B, D6-330A-C, D6-330A-D, D6-330A-E, D6-330A-F, D6-330D-B, D6-D30,360-D-C D6-330D-F, D6-330I-B, D6-330I-C, D6-330I-D, D6-330I-E, D6-330I-FD6-350A-A, D6-350A-BD6-370A-B, D6-370A,70A-C, D6-370A-F, D6-370D-A, D6-370D-B, D6-370D-C, D6-370D-D, D6-370D-E, D6-370D-F, D6-370I-A, D6-370I-B, D6-I-370I D6-370I-E, D6-370I-FD6-400A-E, D6-400A-FD6-435D-A, D6-435D-C, D6-435D-D, D6-435D-E, D6-435D-F, D6-435I,4D-A, D6-435-I-36,A D6-435I-E, D6-435I-F
• Volvo Penta D3, D4 and D6
• Original part
