Anode Concept

Aluminum anode kit for Evinrude E TEC G2 engines

Aluminum anode kit for Evinrude E TEC G2 outboards (early models). The kit is designed to effectively protect the engine's exposed metal parts from corrosion in marine use and extend the engine's service life in demanding operating conditions.

Compatibility

• Evinrude E-TEC G2 engines

• Early models

Series content

• 1 piece anode corresponds to OEM numbers 5007089 and 433580

• 1 piece anode corresponds to OEM number 355964

• 1 piece anode corresponds to OEM number 5009220

• 1 piece anode corresponds to OEM numbers 357597 and 357507

Specifications

• Material aluminum

• Total weight 0.74 kg

The series provides comprehensive corrosion protection and is an excellent choice for regular maintenance of Evinrude E TEC G2 engines.

Aluminum anode kit. The anodes are designed to protect Yamaha 40-75hp engines from corrosion and extend the life of vulnerable engine parts.

The set includes the following anodes:

• 3 pcs, corresponds to OME: 65W-45251-00
• 1 pc, corresponds to OME: 67F-45371-00
• 3 pcs, corresponds to OME: 6G8-11325-01

Weight: 0.74kg

Accessory anode kit.

Shaft anode for propeller shaft

A zinc anode suitable for the propeller shaft that protects the boat's iron and other metal parts from corrosion. The anode acts as a sacrificial protection and effectively slows down corrosion in the boat's underwater metal parts.

Corrosion occurs electrochemically when different metals are in contact with each other. In this situation, the metals act like an electric battery, with water connecting the terminals. In such a combination of metals, the more base metal always corrodes first. Zinc is a more base metal compared to, for example, iron, stainless steel, copper and brass, so it effectively protects more valuable metal parts.

Intended use

• Propeller shaft protection against corrosion

• Protection of underwater metal parts of a boat

• Suitable for boats with shaft drive

Installation

• The anode is always installed below the waterline.

• Attach a shaft support as close as possible to the propeller shaft.

• Installed longitudinally in connection with the metal parts to be protected

• The zinc anode must not be painted with boat primer.

Maintenance and inspection

• Zinc anodes should be checked every time the boat is lifted.

• The anode must be replaced without fail if it is clearly worn.

• A worn anode no longer provides sufficient protection for metal parts

A properly installed and regularly replaced shaft anode extends the life of the propeller shaft and other metal parts of the boat and helps prevent costly corrosion damage.

Aluminum anode for trim tab Yamaha 20-50 hp

Aluminum trim level anode for Yamaha outboards in the power range of 20-50 hp. The anode protects the metal parts of the engine from electrolytic corrosion in marine conditions and acts as a sacrificial element, extending the life of the exposed parts of the engine. The aluminum anode is well suited for both fresh and brackish water.

Aptitude

• Yamaha outboard motors 20-50 hp

• For aluminum-built engines

Product information

• Aluminum trim level anode

• Weight 0.08 kg

• Corresponds to original spare part number 6644537101

Dimensions

• H 55 mm

• Ø 91.5 mm

• Ø1 17 mm

• Ø2 8.5 mm

Regular inspection and timely replacement of the anode helps ensure reliable operation and effective corrosion protection.

Aluminum anode for Yamaha 115-50hp outboard motor mount. The anode protects the engine from corrosion and extends the life of its vulnerable parts.

Dimensions:

• Length: 202mm
• A: 47mm
• B: 6.5mm
• C: 11mm
• Height: 52mm
• H1: 17mm
• I: 183mm
• Weight: 0.36kg
  
  Original part numbers: 6G5-45251-01, 6G5-45251-02

Anode kit for Yamaha 60–90hp outboards, aluminum

This aluminum anode kit is designed for Yamaha outboards with a power output of 60-90 horsepower. The anodes protect the metal parts of the engine from corrosion caused by water. They are intentionally worn away from other parts of the engine, thus preventing corrosion.

Anodes are an important part of outboard maintenance and should be replaced regularly to maintain effective protection. This kit is easy to install and is well suited for saltwater or brackish water boating.

Aluminum anode for trim tabs Yamaha 40-90 hp

Aluminum trim level anode for Yamaha outboards in the power range 40-90 hp. The anode protects the metal parts of the engine from electrolytic corrosion in marine conditions and acts as a sacrificial element, extending the life of the exposed parts of the engine. The aluminum anode is suitable for both fresh and brackish water.

Aptitude

• Yamaha outboard motors 40-90 hp

• For aluminum-built engines

Product information

• Aluminum trim level anode

• Weight 0.17 kg

• Corresponds to original spare part number 6884537102

Dimensions

• H 48 mm

• H1 9mm

• H2 19mm

• Ø 90 mm

Regular inspection and timely replacement of the anode helps ensure effective corrosion protection and a long engine life.

Aluminum anode bar Yamaha 40-100 hp

Aluminum rod anode for Yamaha outboards in the power class 40-100 hp for model years 1990-1999. The anode protects the metal parts of the engine from electrolytic corrosion in marine conditions and acts as a sacrificial element, extending the life of the exposed parts of the engine. The aluminum anode is well suited for fresh and brackish water.

Aptitude

• Yamaha outboard motors 40-100 hp

• Model years 1990-1999

• For aluminum-built engines

Product information

• Aluminum rod anode

• Weight 0.18 kg

• Corresponds to the original spare part number 6H14525102

Dimensions

• L 203 mm

• W 36 mm

• H 16 mm

• I 101 mm

• Ø 15 mm

• Ø1 7 mm

Regular inspection and timely replacement of the anode helps ensure effective corrosion protection and a long engine life.

Anode kit for Yamaha 150–200hp outboard motors, aluminum

This anode kit is suitable for Yamaha outboards with a power of 150-200 horsepower. The anodes protect the metal parts of the engine from corrosion that occurs when operating in water. Made of aluminum, the kit is specifically designed for use in salt or brackish water and effectively extends the life of the engine.

This kit is easy to install and is an important part of protecting your outboard motor. Replace the anodes regularly to keep your motor in good condition for as long as possible.

Series contents:

Rod anode:

• Total length: 202mm

• Width: 47mm

• Mounting hole diameter: 6.5mm

• Hole spacing: 183mm

• Mounting distance from point c: 11mm

• Height: 52mm

• Height from center: 17mm

Trim plate anode:

• Total length: 140mm

• Height: 60mm

• Height from center: 6mm

• Height from edges: 14mm

• Diameter: 100mm

• Thread size: 10x1.25mm

Anode kit Volvo Penta SX-A, DPS-A (aluminum)

• Aluminum anode kit for Volvo Penta SX-A and DPS-A drives

• Suitable for marine, brackish and freshwater use

• Protects the drive train and related metal parts from electrochemical corrosion

• Aluminum anodes often offer longer service life compared to zinc anodes

• Anodes are wearing parts and should be inspected regularly and replaced if necessary.

• Anodes must not be painted.

Compatibility

• Volvo Penta SX-A

• Volvo Penta DPS-A

Material

• Aluminum

Anode kit Honda 75 225 hp aluminum

An aluminum anode kit designed to protect Honda outboards in the 75-225 hp power range from corrosion in seawater. The anodes act as sacrificial elements and help extend the life of the exposed metal parts of the engine.

Aptitude

• Honda outboard motors 75 225 hp

• For aluminum-built engines

• For seawater use

Series content

• 1 piece corresponds to OEM number 06411ZW1000

• 2 pcs corresponds to OEM number 41109ZW1B03

• 1 piece corresponds to OEM number 41107ZW1B01ZA

Zinc anode Volvo – plug model

Zinc anode set for Volvo , supplied complete with plug .
The anode protects the metal parts of the engine and transmission from galvanic corrosion and is an important part of regular maintenance.

Product information

• Type: zinc anode, plug model

• Contents: anode + plug

• Material: zinc

• Purpose: corrosion protection

Compatibility and references

• Fits: Volvo

• Matches original part numbers:
  800476
  838929

Aluminum anode for front gear Evinrude 50–115 hp

Aluminum anode for the front gear of Evinrude outboards. The anode is designed to protect 50-115 horsepower Evinrude engines from corrosion in marine use and to extend the life of the gear and other exposed metal parts.

Compatibility

Fits Evinrude outboards

• Power class 50–115 hp

• Model years 1983–2005

Specifications

• Material aluminum

• Length 102 mm

• Width 63mm

• Height 32 mm

• Mounting distance 74 mm

• Hole diameter 7 mm

• Weight 0.28 kg

Additional information

• Original spare part number 392462

Regular inspection and timely replacement of the anode are important for engine corrosion protection and longevity.

Aluminum anode kit for Evinrude E TEC G2 engines

Aluminum anode kit for Evinrude E TEC G2 outboards (early models). The kit is designed to effectively protect exposed metal parts of the engine from corrosion in marine use and extend engine life in demanding conditions.

Compatibility

• Evinrude E-TEC G2 engines

• Early models

Series content

• 1 piece anode corresponds to OEM numbers 5007089 and 433580

• 1 piece anode corresponds to OEM number 355964

• 1 piece anode corresponds to OEM number 5009220

• 1 piece anode corresponds to OEM numbers 357597 and 357507

Specifications

• Material aluminum

• Total weight 0.74 kg

The anode kit provides comprehensive corrosion protection and is the recommended choice for regular engine maintenance, especially in salt and brackish water.

Anode kit Yamaha 40–60hp, aluminum

This aluminum anode kit fits Yamaha outboards with a power output of 40-60 horsepower. Anodes protect your engine from corrosion by sacrificing themselves - they are the first to wear out to keep the metal parts of your engine in good condition. The kit is easy to install and keeps your engine protected in salt and fresh water.

Contents:

Small plate anodes, 3 pcs.

• I: 63mm

• a: 25mm

• h: 14mm

• I: 26mm

• Ø: 6.5mm

Cubic anode, 1 pc.

• I: 26mm

• I1: 21mm

• a: 35mm

• h: 23mm

• m: M8

Trim plate anode, 1 pc.

• Height: 55mm

• Diameter: 95mm

• Mounting hole diameters: Ø1 17mm, Ø2 9mm

Anode kit Volvo Penta SX (aluminum)

Aluminum anode kit for Volvo Penta SX drives. Aluminum anodes are suitable for marine, brackish and freshwater use. Protects against electrochemical corrosion of the drive and other metal parts. Aluminum anodes generally last longer than zinc anodes. Anodes are wearing parts and should be inspected regularly and replaced if necessary. Anodes must not be painted.

Compatibility

• Volvo Penta SX

Material

• Aluminum

Accessory anode kit.

Anode kit Yamaha 200 250 hp aluminum

Aluminum anode kit for Yamaha outboards in the power class 200-250 hp. The anodes protect the metal parts of the engine from electrolytic corrosion, especially in marine conditions. The aluminum anodes are well suited for both fresh and brackish water and provide effective protection.

Aptitude

• Yamaha outboard motors 200 250 hp

• For aluminum-built engines

Contents and dimensions

Rod anode

• I 202 mm

• 47 mm

• b 6.5 mm

• 11 mm

• h 52 mm

• h1 17 mm

• 183 mm

Trim level

• I 71 mm

• h1 14 mm

• Ø 99 mm

• m 10 x 1.25 mm

Regular inspection and replacement of anodes as they wear out helps extend engine life and ensures reliable operation.

Zinc anode ring for Gori propeller 13–18

Zinc anode ring for Gori propellers with shaft sizes 13–18. The anode protects the propeller and shaft from corrosion by acting as a sacrificial metal. Corresponds to the original Gori product and is dimensioned directly to the original.

Features

• Zinc sacrificial metal anode

• Designed for Gori propellers

• Effective protection for propeller and shaft

• Corresponds to the original model

Dimensions

• I: 98 mm

• a: 40 mm

• Width: 79mm

• Hole Ø: 11 mm

• Ø1: 6.5 mm

Product information

• Compatibility: Gori propellers, shaft size 13–18

• Corresponds to the original product number: 15670000

It is recommended to replace the anode in a timely manner to ensure that the propeller and other metal parts remain effectively protected from corrosion.