Attwood

Protect your transom and engine with the Attwood Telescopic Transom Guard. A tilted outboard engine places a lot of strain on the transom during transport. The transom guard reduces the weight of the engine and prevents the transom from cracking during transport. It works great for hydraulically trim and tilt engines. Adjustable from 68-91cm.

Protect your transom and engine with Attwood's extra strong telescopic transom mount. The outboard motor puts a lot of stress on the transom during transport. The transom mount reduces the weight of the engine and prevents the transom from cracking during transport. It is ideal for hydraulically trim and tilt motors.

The Sahara Mk2 is the only automatic bilge pump that eliminates air locks. Its patented X-Air™ impeller forces out air pockets that can get trapped in the hoses and bottom of the pump, preventing the pump from running dry. The pump is easy to install and maintain, with external mounting feet and an integrated outlet. The Sahara Mk2 offers more installation options and is optimised to be a direct replacement for the major brands of pumps on the market, using identical bores. It offers 40% more protection against water damage and corrosion compared to the Mk1. Warranty: 3 years.

Specifications

S1200

• Flow: 67 L/min (1200 GPH)
• Hose connections: 25mm (1") & 28mm (1-1/8")
• Voltage: 12V
• Fuse size: 6A
• Water level for activation: 50mm
• Water level for stopping: 19mm
• IP rating: IP68
  

• Length: 133mm
• Width: 88mm
• Height: 103mm
• Cable length: 750mm

S800

• Flow: 45 L/min (800 GPH)
• Hose connections: 19mm (3/4") & 25mm (1")
• Voltage: 12V
• Fuse size: 5A
• Water level for activation: 50mm
• Water level for stopping: 19mm
• IP rating: IP68
  

• Length: 133mm
• Width: 88mm
• Height: 103mm
• Cable length: 750mm

S500

• Flow: 28 L/min (500 GPH)
• Hose connections: 19mm (3/4") & 25mm (1")
• Voltage: 12V
• Fuse size: 3A
• Water level for activation: 50mm
• Water level for stopping: 19mm
• IP rating: IP68
  

• Length: 133mm
• Width: 88mm
• Height: 103mm
• Cable length: 750mm

Recommended boat sizes

• 5.5m / Sahara Mk2 S500
• 5.5 - 7 m / Sahara Mk2 S800
• 6.7 - 8 m / Sahara Mk2 S1200

Attwood's durable light mast elevates your light above your trolling motor, anchor or other gear. When not in use, the lights can be removed from the base and stored out of the way while you are fishing or anchoring. The light mast features a locking ring and 2-pin connector.

The product is available in the following sizes:

• 60cm
• 91cm
• 106cm
• 122cm
• 132cm

Flushing device for outboard motor

Flushing device for fresh water flushing of the cooling system of outboard motors and drive units. Particularly suitable for flushing the engine after use and during preparation for winter storage. The device is installed over the cooling water intakes and connected to the water hose.

Use

• Freshwater flushing of outboard motors and propulsion equipment

• Installed over the cooling water intakes

• Connects to a garden hose

Safety instructions

• Do not operate the outboard motor at speeds exceeding 1200 rpm.

• Do not operate the Mercruiser drive at speeds greater than 600 rpm.

• Make sure the motor does not overheat during operation.

• It is recommended to remove the propeller before use.

• Always follow the engine manufacturer's instructions.

Attention

• To use the Gardena connection, a separate hose connector is required, item number 7296

Engine compartment fan Turbo 3000.

Acid-resistant polypropylene with strap and strap holder.

The Tsunami Mk2 is the only bilge pump that eliminates air locks. Its patented X-Air™ impeller forces out air pockets that can get trapped in the hoses and bottom of the pump, preventing the pump from running dry. The pump is easy to install and maintain, with external mounting feet and an integrated outlet. The Tsunami Mk2 offers 40% more protection against water damage and corrosion than the Mk1.

Specifications:

• Flow: 67 L/min (1200 GPH)
• Hose connections: 25mm (1") & 28 mm (1-1/8")
• Voltage: 12V
• Fuse size: 5A
• Minimum water level: 10mm (2/5")
• IP rating: IP68

Dimensions:

• Length: 104mm
• Width: 101mm
• Height: 112mm
• Cable length: 735mm

Recommended boat sizes:

• 5.5m / Tsunami Mk2 T500
• 5.5 - 7 m / Tsunami Mk2 T800
• 6.7 - 8 m / Tsunami Mk2 T1200

Attwood's durable light mast elevates your light above your trolling motor, anchor or other gear. When not in use, the lights can be removed from the base and stored out of the way while you are fishing or anchoring. The light mast features a locking ring and 2-pin connector.

Engine compartment fan Attwood 100mm

• Airflow: 5.7m3/minute
• Current consumption: 3.5A
• Fuse: 8A

Lock'N Pin chair base. The base has a shock-absorbing spring and rotates 360 degrees.

The height of the product is 28cm.
The size of the foot is 18x18cm.

Ideal for attaching a seat to the bow or stern of fishing boats. Not recommended for use in the pilot's seat or at speeds over 5 knots.

Attwood LightArmor LED traffic lights are waterproof and highly resistant to corrosion

Attwood LightArmor LED path lights are corrosion resistant and waterproof. (IP rating 67). There is an indicator light on the top of the light that lights up when it is on. The compact size allows for easy installation in tight spaces, and the smooth shape prevents ropes from catching on the light and preventing damage to the light. The colored diodes have a lifespan of over 50,000 hours. Visibility 2NM.

The product is attached with three screws and a gasket is included. Screws are not included in the package.