Autoterm

Autoterm air heater. A modern air heater significantly increases comfort on a boat. With an air heater, heat is distributed quickly and effectively removes moisture from the boat, which is often a nuisance on a boat.

Don't let the weather ruin your vacation - this heater will keep your boat warm and cozy in all weather conditions

The heater has a low noise level. The motor that drives the fan is a brushless type, which is very reliable and quiet. It also has silencers for both exhaust and supply air, so your sleep will not be disturbed.

Features

• Temperature mode: Maintains the set temperature by reducing power without turning off combustion.
• Power: Heats continuously according to the selected power.
• Heating + ventilation: Heats until the temperature exceeds the selected temperature by 1°C, then the combustion is turned off until the temperature has dropped by 6°C. After this, the process is repeated. Perfect for cold evenings and warm mornings!
• Thermostat mode: The heater operates until the selected temperature is reached. It then turns off and restarts when the temperature has dropped a specified number of degrees.
• In addition, the control panel features a user-friendly interface, LED indicator, battery protection function and much more.

This kit comes with the following accessories and installation materials:

• Air heater 2kW.
• Comfort panel.
• Fuel pump with hose and tank connection.
• Silencer.
• Drain hose with insulation.
• Exhaust hose (stainless steel).
• Air intake hose with silencer.
• Power supply, control panel and fuel pump wires.
• Stainless steel fasteners for all parts.
• The kit only needs to be supplemented with a fuse, air hose and air vent if they are missing from the boat.

Autoterm air heater. A modern air heater significantly increases comfort on a boat. With an air heater, heat is distributed quickly and effectively removes moisture from the boat, which is often a nuisance on a boat.

Don't let the weather ruin your vacation - this heater will keep your boat warm and cozy in all weather conditions.

The heater has a low noise level. The motor that drives the fan is a brushless type, which is very reliable and quiet. It also has silencers for both exhaust and supply air, so your sleep will not be disturbed.

Features

• Temperature mode: Maintains the set temperature by reducing power without turning off combustion.
• Power: Heats continuously according to the selected power.
• Heating + ventilation: Heats until the temperature exceeds the selected temperature by 1°C, then the combustion is turned off until the temperature has dropped by 6°C. After this
• the procedure is repeated. Perfect for cold evenings and warm mornings!
• Thermostat mode: The heater operates until the selected temperature is reached. It then turns off and restarts when the temperature has dropped a specified number of degrees.
• In addition, the control panel features a user-friendly interface, LED indicator, battery protection function and much more.

This kit comes with the following accessories and installation materials:

• Air heater 2kW.
• Comfort panel.
• Fuel pump with hose and tank connection.
• Silencer.
• Drain hose with insulation.
• Exhaust hose (stainless steel).
• Air intake hose with silencer.
• Power supply, control panel and fuel pump wires.
• Stainless steel fasteners for all parts.
• The kit only needs to be supplemented with a fuse, air hose and air outlet if it is missing from the boat.

Diesel heater Autoterm 9D Pro 12V – an efficient solution for heating large spaces

The Autoterm Air 9D Pro 12V Comfort Panel is the most powerful diesel heater in the Air series. It is ideal for heating large spaces, such as trunks, buses, large motorhomes, special vehicles, boats and yachts.

The heater draws air from either outside or a well-ventilated space, heats it quickly and provides comfortable warmth even in very cold conditions. The durable steel frame and double-spiral heat exchanger make the device durable and efficient.

The maximum output is 8kW, and the heater can produce up to 413m³ of warm air per hour. This helps to maintain a constant temperature even in severe frosts.

The heater is easy to install or retrofit in a wide range of vehicles and boats. A full installation kit is included. The model is available in both 12V and 24V versions.

Despite its high power, the heater is fuel efficient, consuming only 0.42–1.00l/h depending on the power.

All heaters in the Autoterm Air series have brushless induction motors, which ensure quiet operation, long service life and reliable operation even in temperatures as low as -45°C.

The included Comfort Panel control panel makes operation easy and also allows remote control with an iOS or Android device (remote module must be purchased separately).

Features of the Comfort Panel control panel:

• Easy-to-use interface

• LED status display

• Thermostat function

• Additional heating options

• Quick start button

• Vehicle battery protection function

• Maintenance reminder

• Accurate internal digital temperature sensor

The AT0012 exhaust adapter with an outer diameter of 38mm is also included in the package. The adapter is made of durable 316 stainless steel, making it an excellent choice for demanding and abrasive conditions.

This heater is an excellent choice when you need an efficient and reliable heating solution for large spaces.

Specifications 12V (high/low mode):

• Heating power: 8kW / 3.2kW

• Amount of heated air: 413m³/h / 70m³/h

• Power consumption: 210W (24V)

• Fuel: Diesel – EN590

• Fuel consumption: 1.0l/h / 0.42l/h

• Fusing unit weight: 12.8kg

• Total weight: 18kg

• The product dimensions are 650x212x281mm

Air nozzle for tight installations

The air nozzle is designed for installations where traditional round air vents cannot fit. It is ideal for applications such as under windows and other confined spaces where efficient defrosting and air control are required.

The air nozzle has a 60 mm connection that can be connected directly to the Air 2D heater. With the Air 4D heater, it is recommended to use a Y branch to connect two air nozzles, or combine a standard ventilation valve and air nozzle for optimal air distribution and prevention of overheating.

Features

• Suitable for tight installations where a round valve cannot fit
• Efficient air distribution and defrosting
• Direct connection to Air 2D heater
• Compatible with Air 4D system via Y branch
• Supplied as a complete set, including screws, installation template and instructions

Exhaust pipe grommet with 24 mm connection and 45 degree angle.
Made of 316 stainless steel and supplied with gasket and mounting screws.

Robust construction, designed for use in all aggressive environments.

Fits the following models:
Autoterm Air 2D
Autoterm Air 4D

Heater accessory – Branch piece 60x60x60mm plastic

This plastic branch piece is ideal for dividing heater air ducts in two different directions. It helps direct the flow of warm air to multiple spaces, such as a boat, caravan or cottage.

The branch piece has three equal connections, each measuring 60mm. It is made of durable plastic that is well suited for heat-resistant use.

This is easy to install and allows you to distribute heating air efficiently to different rooms.

Specifications:

• Material: plastic

• Connection pipe diameter: 60mm

• Product size: 60x60x60mm

T-piece with 90° branch for connecting heating hoses with a diameter of 90 mm. Used to divide the air flow in two directions in the heating system and allows flexible installation in boats, motorhomes or other vehicles with air heaters. Perfectly fits Autoterm Air 4D and other systems with a hose diameter of 90 mm.