Barton
Barton -ryhmän tuotteet
- The trolley's slats can hold up to a 12 mm thick scooter rope (or two of them)
- The maximum breaking strength of the trolley is 2280 kg.
- The ring is 40 mm in diameter.
Consists of two strong fiberglass springs that attach to both the mast slot and the boom. When tightening the kick pulley, the fiberglass springs bend and when loosening the pulley, the springs straighten, raising the boom.
- Replaces Dirk
- Easier and safer to roam
- The boom cannot accidentally fall.
- Improves sail trimming
- Lightweight and maintenance-free
- Available for boats up to 12 m in length.
- Recommended boat length 7.5 - 9 m
- Length from pin to pin 1180 mm
- Max. thrust 185 kg
Barton scooter lock, kevlar/zytar stainless steel springs, black. Rope 2-10mm, screw hole spacing 30mm.
- Attachable to rope and stay
Spinning sheave made of acetal plastic with a plain bearing.
- Sheave wheel
- Diameter 32mm
- Thickness 14mm
- Shaft 8mm
- Plain bearing
Barton 32 mm T-track slide, towable trolley 2:1 with tow eye or slat (instead of plunger)
Allows the adjustment rope to be pulled back, allowing the genoa car to be adjusted from the cockpit. Used in conjunction with the end pieces shown.
- Length (mm): 220
- Width (mm): 52
- Height (mm): 102
- Spool diameter (mm): 50
- Maximum rope diameter (mm): 2 x 16
- Breaking strength (kg): 3280
- Rated working load (SWL) (kg): 1640
- Weight (g): 561
Outboard motor lifting strap Barton
Bartonin perämoottorin nostoliina on tukeva ja luotettava apuväline perämoottorien käsittelyyn ja nostamiseen. Se on suunniteltu helpottamaan enintään 15 hevosvoiman ja 50 kg painavien perämoottorien siirtämistä. Kestävä rakenne ja ruostumattomat teräsosat takaavat pitkän käyttöiän vaativissa meriolosuhteissa.
Features
Easy-to-use design
The sling can be quickly removed after installation using the two stainless carabiners on the front
Adjustable fit
Adjustable design allows use with outboard motors of various sizes
Durable construction
Made from strong woven webbing
Stainless buckles and fasteners resist corrosion and wear
Product information
Maximum load: 50 kg
Compatibility: most outboard motors up to 15 hp
Material: durable woven tape and stainless steel parts
- Lifting strap for outboard motors
- Maximum 15 hp / 50kg
- Adjustable
Simple release DO550, for 8 – 12 mm braided rope. Max 550 kg pulling force (12 mm rope).
Link clamp with stopper.
- Fits 25 mm rail
- Breaking strength: 2560kg
- Spinner size 45mm x 13mm
- Max. 8 mm rope
- Working load 400kg
- Breaking strength 800kg
Barton scooter lock with guide, Kevlar/Zytal, stainless steel springs, black. Rope 4-10mm, screw hole spacing 30mm.
- 70101
- For 4-10mm rope
Heavy Duty genoa car with stop. Working load 2985 kg, breaking strength 5970 kg. Max. for 16 mm rope. Anodized aluminum.
- Heavy Duty genoa trailer with stop
- Working load 2985kg
- Breaking strength 5970kg
- Max. 16 mm rope
- Anodized aluminum
- Simple spinner
- Fixed link
- For 8, 10 and 12mm rope
- Working load 370Kg
- Breaking strength 740Kg
- Length (mm) 205mm
- Height (mm) 28mm
- Width (mm) 38mm
- Violin with rope lock and hunsvot
- Max. 10mm rope
- Working load 400Kg
- Breaking strength 800Kg
- Spinner 13x45mm
Line Tamer, the “Rope Tamer”. A new clamp that makes rope handling easier. Wind up your hoists and mooring lines, store them neatly and safely with the Line Tamer. The lines are quickly at hand whenever you need them. The round and streamlined design of the rope holder prevents ropes and clothing from getting caught. For both sailboats and motorboats.
- Holder for tidy storage of ropes
Durable and long lasting. Kevlar/Zytal, stainless steel springs, black.
- Rope Ø 6 - 12 mm
- Screw hole spacing 40 mm
- Spinner size 45 mm x 13 mm
- Max. 8 mm rope
- Working load 400 kg
- Breaking strength 800 kg
