BEP

Main circuit breaker for flush mounting
Function: Off/On
For flush mounting (hole 52mm)
Removable swivel wheel
12V - 48V
Tinned connections 2 x M10

BEP EZ-Mount main power switch, from the Pro Installer series. EZ-mount allows for extremely easy installation. 1: Install the base. 2: Connect the cables. 3: Snap the cover into place.

Function: on/off.
IP66 rated.
Removable shells and knob.
Surface mounting
12V - 48V.
Pre-processed connections 2 x M10.
Maximum load at start-up: 1500A for 10 seconds.
Maximum load for 5 minutes: 600A.
Continuous load: 400A.
Dimensions: L 98 x W 98 x H 92mm.

BEP Pro Installer is a completely new concept for boat electrical installations. Pro Installer connectors allow Pro Installer components to be connected without cables, making installations more durable, cleaner and more compact.

BEP automatic fuse panel with 8 switches. The panel is made of powder-coated aluminum designed for marine use, with Airpax magnetic hydraulic switches. Fuses: 2x 5A, 2x 10A, 3x 15A and 1x 20A. Green LED backlit labels. Red LEDs indicate power on. Includes max 160A12VE label set and power rail. Dimensions: H 115 x W 239 x D 64.

Waterproof fuse and switch panel from BEP.
Green LED backlit labels.
Red LED lights as "ON" indicator.
6 switches, maximum 20A.
3 In-Line fuses for ATC fuses (flat) behind the panel.
Label collection and 3 fuses included.
Product dimensions: H 158mm x W 112mm x D 64mm.

Conductive parts made of tinned copper. Compact design that saves space. Polycarbonate lock. Long connection screws. Stainless screws, washers and bolts. Withstands up to 50V. BEP Pro Installer is a completely new concept for electrical installations on boats. With the help of connection pieces, Pro Installer components can be connected without cables, making installations more durable, neater and more compact.

BEP waterproof switch panel. Rocker switch max 20A. Waterproof In-Line fuse holder for ATC fuses (flat pin). Waterproof IP56 rating. Sticker set and 3 fuses included. Dimensions: H 95 x W 107 x D 75

• Switches: Tiltable, maximum power 20A
• Waterproof In-Line Fuse Holders for ATC Fuses (Flat Faces)
• IP56 protection
• Includes label set and 2 fuses
• Product dimensions: Height 95mm, width 107mm, depth 75mm

BEP Switch panel for indoor use. Removable frame with mounting screws and flat ATC Fuses underneath. 6 pcs 16A rocker switches. Max load 50A 12V Sticker set and 6 pcs 15A fuses included.

Contour main switch.
Function: Off/On
For both recessed and surface mounting (52mm hole for recessed mounting).
The patented locking system allows for a simpler and cleaner connection to other BEP switches.
Spark-proof.
Removable steering wheel.
12V - 48V
Tinned connections 2 x M10

Corrosion-resistant fuse, time-delayed action, withstands current peaks of up to 3000 A. The fuse is tin-plated and has an optical indicator of the fuse status.

Double-pole main switch BEP Pro Installer. Function: on/off - Insulation for protection of both positive and negative poles. IP66 rated. Removable covers and handle. Three installation options: surface mounted, flush mounted and built-in. 12V - 48V. Pre-processed connections 4 x M10. Maximum load at start-up: 1500A for 10 seconds. Maximum load for 5 minutes: 600A. Continuous load: 400A. Dimensions: L 98 x W 98 x H 92. NOTE! For safety reasons, it is not recommended to use the switch to switch off both starter and recreational batteries. In that case, use the main switch no. 71192 or 71193 instead. BEP Pro Installer is a completely new concept for electrical installations on boats. The connectors allow Pro Installer components to be connected without cables, making installations more durable, neater and more compact. Perfect for installation on boats.

BEP connection rail with protective cover. Conductive parts made of tin-plated brass. Connection screws (4mm) made of stainless steel. 2pcs bolts (6mm) made of stainless steel. Connection point height: 29mm

BEP waterproof switch panel with cigarette lighter connection. 12V connector max 16A. Rocker switch max 20A. Waterproof In-Line fuse holder for ATC fuses (flat pin). Waterproof IP56 rating. Sticker set and 3 fuses included. Dimensions: H 95 x W 107 x D 75

Earth terminal that can be connected to fuse box 70905 and 70906, allowing for a cleaner and more compact installation. Includes transparent protective cover. 6 terminals. 1 connection, 5 mm. Maximum 100A total. Dimensions: 35 x 90 x 47 mm.

Double mounting rail with protective cover (black and red) from BEP. Conductive parts made of tin-plated brass. Terminal screws (4mm) made of stainless steel. 2 bolts (6mm) made of stainless steel in each terminal.

Digital voltage detection relay.

A digital relay allows a second battery bank to be charged from each individual charging source. When the voltage of the battery being charged has risen sufficiently, the DVSR switches the relay so that battery bank #2 is charged instead. When charging stops and the voltage drops, the relay automatically isolates the battery banks so that the starter battery always remains fully charged.
• Charge two or more battery banks from a charging source, such as a generator or battery charger.
• Insulates the electronics from harmful electrical spikes in the starter motor.
• Fireproof
• 12V and 24V. Automatic detection.
• LED output for remote control status.
• Continuous load: 140A

Fuse box designed for ATC fuses (flat models) with quick connection. Smart design allows easy access to the fuses.

Features

• Maximum current per fuse: 30A
• Maximum current per block: 100A
• Maximum voltage: 32V
• Spare fuse holder
• Sticker set included
• Dimensions: 80 x 90 x 47mm

BEP stainless buzzer with LED light. Made of stainless steel and silver alloy plated connectors. LED light frame that flashes red during alarm. Waterproof, IP5080 12V. 80 decibel sound.

BEP stainless steel push button with LED indicator. Made of stainless steel and silver alloy plated connectors. LED light ring for "On" status indication. Waterproof, IP67 rated. Max 5A12V

BEP fuse holder for use with ANL and ANN fuses, 8mm and 10mm fuses. 8mm bolts with double washers mean that the holder can also accommodate other brands of fuses. Polycarbonate cover. BEP Pro Installer is a completely new concept for marine electrical installations. Link arms allow Pro Installer components to be connected to each other without cables, making installations more durable, cleaner and more compact. Perfect for marine environments.