Glydus

Hydraulic steering package for outboard motors up to 115hp

Glydus K115 is the next generation of hydraulic steering – an improved version of the previous Multisteer 115U model, with even greater performance and reliability. With a stronger pump, higher operating pressure and faster response, you get reliable and smooth steering for outboard motors up to 115hp. The system is designed for easy installation and a long service life thanks to its robust construction.

The new H18M steering pump delivers up to 105bar of operating pressure and 18cc of displacement, ensuring more efficient and responsive steering. The package comes complete with steering pump, cylinder, hoses and 2 litres of hydraulic oil – ready to install thanks to the factory pre-fitted hose connections.

The optimized design makes steering faster, about 5 wheel turns from side to side. The built-in non-feedback system increases safety by preventing unintentional motor movements, and thanks to corrosion-resistant materials, you get a durable solution that will work season after season.

Main features:

• Improved steering pump: New H18M model, 18cc capacity and up to 105bar operating pressure.
• Complete package: Includes steering pump, cylinder, hoses and 2 liters of hydraulic oil.
• Quick response: Approximately 5 turns of the steering wheel from side to side.
• Stable control: Non-feedback system prevents unintentional motor movements.
• Easy installation: Pre-assembled hose connections speed up installation.
• Durable construction: Corrosion-resistant materials ensure a long service life.

Is this control suitable for all engine manufacturers with a power output of up to 115 hp?

It is compatible with most outboard motor brands, including Yamaha, Mercury, Suzuki, Honda, Evinrude, and Tohatsu, as long as the engine power does not exceed 115 hp.

How much space is needed in the engine bay for installation?

The recommended minimum width is 550mm, provided the motor is centered in the well and does not require additional installation clearance.

How many turns of the steering wheel are needed from side to side?

The system has approximately 5 steering wheel turns from side to side, ensuring a smooth and stable steering response.

Can I use the same steering wheel as before?

In most cases, yes. If your existing steering wheel is around 350mm in diameter and has a standard cone mount, it will fit. However, always check the instructions for compatibility or ask your dealer for advice.

Compatible engines:

• Yamaha 4-stroke: 20–115hp
• Yamaha 2-stroke: 25–90hp
• Mercury 4-stroke: 20–115hp
• Mercury 2-stroke: 25–90hp
• Suzuki 4-stroke: 30–115hp
• Suzuki 2-stroke: 30–40hp
• Honda 4-stroke: 20–115hp
• Evinrude 4-stroke: 30–115hp
• Tohatsu 4-stroke: 15–115hp

59 kgm hydraulic steering system for inboard motor boats

Specifications

• Hydraulic pump
• Model: HP-16F
• Volume: 16 cm³
• Cylinder
• Model: IC-32-A
• Cylinder capacity: 116 cm³
• Steering wheel revolutions: 7.25
• Torque: 59 kgm
• Hydraulic hose length: 2x5 meters

Glydus Smart Steering 90F steering system for outboard motors

Glydus Smart Steering 90F is an innovative and patented steering system that replaces traditional cable steering in smaller outboard boats. The system is suitable for engines up to 90 hp, with a recommended operating range of up to 60 hp.

The system provides smooth, precise and completely feedback-free steering, while eliminating the most common problems of traditional cable steering. Unlike hydraulic or electric-assisted solutions, Smart Steering is a compact, lightweight and cost-effective alternative, especially for small boats.

Features

• Replaces traditional cable control
• Smooth and precise steering without feedback on the steering wheel
• Maintenance-free design, no cables or lubrication required
• Compact and lightweight design
• Easy installation, ideal for retrofitting
• Compatible with all mechanical control systems
• Improves driving comfort and safety

Delivery content

Supplied as a complete set including:

• Steering pump
• Steering cylinder
• Hydraulic hoses
• Oil

Installation and compatibility

• DIY friendly solution without special tools
• Easy to install without complicated adjustments
• Front-mounted model, suitable for boats with limited space in the engine well

Glydus hydraulic steering system for 175 hp outboard motors

Glydus 175 hp is a modern hydraulic steering system for outboard motors up to 175 horsepower. The system is based on the previous Multisteer OH 175 model and offers a stable, efficient and precise steering feel for both day trips and longer journeys.

The new HR22 pump operates at higher pressure and responds faster, improving steering accuracy. The non-feedback function keeps steering stable without disturbing movements from the motor. The structure is designed for easy installation, low friction and long-lasting use.

Perfectly suited for medium-sized boats and provides reliable steering even at higher speeds.

Features

• Complete set includes steering pump, cylinder, hoses and oil
• Non-feedback system keeps direction stable without motor influence
• Refurbished HR22 pump, operating pressure 1015 psi
• Recommended engine power 115–150 hp
• Maximum engine power 175 hp
• Suitable for engine wells from 570 mm wide
• Recommended steering wheel diameter 350 mm for optimal control

Hydraulic steering for outboard motors up to 350hp

The Multisteer 350 is designed for larger outboard motors up to 350 hp. The system features a hydraulic cylinder with a non-feedback valve that prevents the engine from turning unintentionally during operation. The system uses two flexible and durable high-pressure hoses with quick-connect couplings, allowing for easy, safe and quick installation. The durable aluminum housing ensures a long service life and protects against corrosion caused by seawater.

The hydraulic pump is designed for easy maintenance and has a compact internal structure and a stylish exterior. The package includes a hydraulic steering pump (HP-27), a front-mounted bullhorn cylinder (OC-350), 2 liters of hydraulic oil (HO-150) and 2 × 7.5 meters of hydraulic hoses (CT-7.5) with factory-installed hose connectors.

Features

• Power: Suitable for engines up to 350 hp
• Non-feedback: Built-in valve eliminates steering resistance caused by engine torque while driving
• Robust construction: Durable nylon hoses with quick-connect fittings – easy installation and reuse
• Long service life: Aluminum housing ensures durability and corrosion resistance

Specifications

• Minimum engine bay width: 79 mm
• Maximum power: 350 hp
• Steering wheel revolutions: 6.1
• Cylinder: Displacement 166 cm³, stroke 203 mm
• Steering pump: Volume 27 cm³, maximum pressure 70 bar, standard ¾” shaft (fits most steering wheels)
• 7 pistons for a smooth and smooth steering feel

Compatible with the following engines

• Yamaha 4-stroke: 90–350 hp
• Yamaha 2-stroke: 90–200 hp
• Mercury 4-stroke: 75–350 hp
• Mercury 2-stroke: 90–250 hp
• Suzuki 4-stroke: 70–350 hp
• Honda 4-stroke: 75–250 hp
• Evinrude 4-stroke: 90–300 hp
• Tohatsu 4-stroke: 70–250 hp

hydraulic control package for inboard engines

Specifications:

• Model: HP-27
• Volume: 27 cm³

• Model: IC-32-A1
• Cylinder capacity: 146 cm³
• Wheel revolutions: 5.84

• Torque: 75 kgm
• Hydraulic hose length: 2x7 meters

The Glydus 90° hydraulic fitting is an elbow fitting for hydraulic steering systems. It is suitable for installations where the hydraulic hose needs to be connected at a 90-degree angle, for example due to limited installation space.

The fitting is suitable for connecting an autopilot as well as for dual-station steering systems using a dual pump. The angled design makes it easier to install hydraulic hoses neatly and efficiently, especially in confined spaces.

Features

• 90-degree elbow fitting for hydraulic steering
• Designed for dual-pump installations
• Suitable for connecting an autopilot
• Suitable for dual-station steering systems
• Makes hydraulic hose installation easier in confined spaces
• Enables neat and space-saving hose routing
• For Glydus hydraulic steering systems