Isotherm
Tuoteryhmät
Isotherm -ryhmän tuotteet
Kampanja
A standard 42-litre cabinet that has been installed on thousands of boats. The interior of the cabinet has been completely renovated. It has a 4-litre enclosed freezer compartment and an interior light. The cabinet's cold source is a Secop BD Micro 1.4F VSD compressor. The compressor, which is hung on the back wall of the cabinet, is easy to remove and move up to 1 metre away from the fridge. Cabinet height 522 mm, width 380 mm and depth without compressor 305 mm + door thickness 40 mm. The compressor adds 107 mm to the depth. Weight 13.5 kg. The door colour is steel grey. Operating voltage 12/24 V, power consumption 300 W/24 h.
Installation brochure .
Installation brochure .
- Refrigerator 42L
- Freezer 4L
- height 522 mm
- width 380 mm
- depth without compressor 305 mm
- Compressor increases depth by 107 mm
- Door thickness 40 mm
- The door color is steel gray.
- Operating voltage 12/24 V
- Power consumption 300 W/24 h
- Weight 13.5 Kg
Kampanja
The refrigerator is equipped with a Secop BD35F compressor. The cabinet has a four-liter freezer compartment and an interior light. Height 523 mm, width 386 mm, depth 450 mm + door 40 mm, volume 49 liters and weight 17 kg. Operating voltage 12 V/24 V. Power consumption 340 W/24 h. Gray door that opens to the right. Note, the refrigerator is delivered without a mounting frame. The frame must be ordered separately.
- 12/24V
- Volume: 49L
- Net weight: 17kg
- Height: 523mm
- Width: 386mm
- Depth: 450mm + door 40mm
- The door opens to the right.
- Manufacturer: Isotherm
Kampanja
The Compact Classic 2006 is an air-cooled system with a fan and direct evaporator, designed for easy DIY installation in an existing top or side opening cooler.
The evaporator (= cooling) is a flat design, which means it can be bent to fit into an existing box. The evaporator is equipped with a 2-meter soft, slightly bent tube with quick connectors to make it easier to connect the compressor.
Means average/maximum power at 12 volts, +6°C in the refrigerator compartment and ambient temperature +22°C measured in a normally insulated cooler box, half the recommended maximum capacity as above. Average consumption is measured over the entire operating time and maximum consumption with the compressor running.
The evaporator (= cooling) is a flat design, which means it can be bent to fit into an existing box. The evaporator is equipped with a 2-meter soft, slightly bent tube with quick connectors to make it easier to connect the compressor.
Means average/maximum power at 12 volts, +6°C in the refrigerator compartment and ambient temperature +22°C measured in a normally insulated cooler box, half the recommended maximum capacity as above. Average consumption is measured over the entire operating time and maximum consumption with the compressor running.
- Operating voltage: 12-24V
- Max box volume: 80 liters
- Evaporator: Flat
- Evaporator dimensions: 350x250mm
- Compressor dimensions: 280x160x160mm
- Average current consumption/maximum: 0.6/2.7A*
- Compressor type: Danfoss BD35F
- Temperature range: Down°C - +2
Kampanja
The interior of the Isotherm 65 refrigerator ensures that the goods remain in place even in rough seas. The cabinet has a built-in Secop compressor unit. Height 527 mm, width 455 mm, depth 480 mm, volume 65 liters including a 4 liter freezer compartment and weight 17 kg. Operating voltage 12/24 V, power consumption 360 W/24 h.
- Weight 17Kg
- Height 527mm
- Width 455mm
Kampanja
Isotherm Compact Classic 2001 is an air-cooled system with a fan and direct evaporator, designed for easy DIY installation in an existing top or side opening cooler.
The evaporator (= the one that cools) is an O-evaporator. The evaporator is equipped with a 2-meter soft, slightly bent tube with quick connectors to facilitate the connection of the compressor. Uses average/maximum power at 12 volts, +6°C in the refrigerator compartment and an ambient temperature of +22°C measured in a normally insulated cooler box, half the recommended maximum capacity as above. Average consumption is measured over the entire operating time and maximum consumption with the compressor running.
The evaporator (= the one that cools) is an O-evaporator. The evaporator is equipped with a 2-meter soft, slightly bent tube with quick connectors to facilitate the connection of the compressor. Uses average/maximum power at 12 volts, +6°C in the refrigerator compartment and an ambient temperature of +22°C measured in a normally insulated cooler box, half the recommended maximum capacity as above. Average consumption is measured over the entire operating time and maximum consumption with the compressor running.
- Max box volume: 125 liters
- Vaporizer: Small-O
- Operating voltage: 12-24V
- Vaporizer dimensions: 240x210x85mm
- Compressor dimensions: 280x160x160mm
- Weight: 9Kg
- Power consumption Average/Max: 0.6/2.7A
Kampanja
The result of long and careful research and development, combining technical innovations with elegant and practical design solutions, the Isotherm Cruise 85 is designed for boating applications where robust construction, the lowest noise level, maximum reliability and, above all, low energy consumption are required.
The Isotherm Cruise 85 has an 8-litre freezer compartment with a door. It can accommodate PET bottles and milk cartons lying or standing. The built-in compressor provides a flat back.
Specifications:
Operating voltage: 12-24V
Model 1851G: Std. gray front
Volume: 85 liters
Height: 625mm
Width: 475mm
Depth: 515mm
Weight: 20kg
Average/Maximum Current (12V): 0.8/4.0Amp
Danfoss compressor Type: BD35F
Freezer -6°C, 8 liters
The result of long and careful research and development, combining technical innovations with elegant and practical design solutions, the Isotherm Cruise 85 is designed for boating applications where robust construction, the lowest noise level, maximum reliability and, above all, low energy consumption are required.
- Volume 85 liters
- Freezer compartment -6°C, volume: 8 liters
- 475 x 625 x 515mm
Kampanja
Isotherm 3201 ITC is the latest solution for low power consumption. The unit detects if there is an external load, such as a solar panel or engine start, and in this case the compressor accelerates its operation, cooling the storage or adding extra cold to the food in the so-called overcooling mode. In this case, the temperature drops another 3 degrees from the set value, but not below 0 degrees, as the temperature sensor monitors the system.
The digital display is clear and allows you to check the temperature from outside the refrigerator. The system is designed to create a stylish user interface, better control and lower power consumption. A temperature sensor inside detects the actual air temperature and combines it with the user-selected settings to determine the compressor operation.
Features:
Easy to read temperature
Compressor operating mode selection (ITC, Eco and cooling)
Three battery charge levels
Excellent compatibility with lithium batteries
ITC
Advantages:
Up to 25% energy savings thanks to the use of a more efficient compressor
Up to 40% savings thanks to stored cooling energy
Rapid cooling at high voltage
Soft start that avoids peak currents
Eco mode
Easy battery voltage level setting directly from the display
Easy to retrofit
Specifications:
Operating voltage: 12-24V
Maximum volume: 100 liters
Evaporator: small cold accumulator
Cold storage dimensions: 300 x 210 x 60mm
Compressor dimensions: 280 x 175 x 160mm
Weight: 14kg
Compressor type: Danfoss BD35F
The digital display is clear and allows you to check the temperature from outside the refrigerator. The system is designed to create a stylish user interface, better control and lower power consumption. A temperature sensor inside detects the actual air temperature and combines it with the user-selected settings to determine the compressor operation.
Features:
Easy to read temperature
Compressor operating mode selection (ITC, Eco and cooling)
Three battery charge levels
Excellent compatibility with lithium batteries
ITC
Advantages:
Up to 25% energy savings thanks to the use of a more efficient compressor
Up to 40% savings thanks to stored cooling energy
Rapid cooling at high voltage
Soft start that avoids peak currents
Eco mode
Easy battery voltage level setting directly from the display
Easy to retrofit
Specifications:
Operating voltage: 12-24V
Maximum volume: 100 liters
Evaporator: small cold accumulator
Cold storage dimensions: 300 x 210 x 60mm
Compressor dimensions: 280 x 175 x 160mm
Weight: 14kg
Compressor type: Danfoss BD35F
•100 liters
•Danfoss BD35F
•Small refrigerator
•Danfoss BD35F
•Small refrigerator
A stunning and high-quality Elegance series refrigerator for vessels of all sizes. The door surface is melamine imitating brushed steel. Completely redesigned door locking mechanism, which makes it possible to lock the cabinet door also in the ventilation position. Updated method of attaching the refrigerator to the boat's hull; no longer requires separate mounting strips. Thick insulation and reliable Secop BD35 12/24V compressor ensure low power consumption. Blue LED interior lighting. Ready to install the Isotherm Smart Energy Control unit, which has the potential to reduce power consumption even further.
- 130 L
- Dimensions 750 x 525 x 505 + 50 mm (door)
- Power consumption 418 W /24h
- Weight 23.1 Kg
A stunning and high-quality Elegance series refrigerator for ships of all sizes. Dimensions: 525 x 380 x 452 + 50 mm (door). Power consumption/24 h 265 W.
The door surface is melamine imitating brushed steel. Completely revised door locking mechanism, which allows the cabinet door to be locked in the ventilation position as well. Revised method of attaching the refrigerator to the boat's hull; no longer requires separate mounting strips. Thick insulation and reliable Secop BD35 12/24V compressor ensure low power consumption. Blue LED interior lighting. Ready to install the Isotherm Smart Energy Control unit, which can reduce power consumption even further.
The door surface is melamine imitating brushed steel. Completely revised door locking mechanism, which allows the cabinet door to be locked in the ventilation position as well. Revised method of attaching the refrigerator to the boat's hull; no longer requires separate mounting strips. Thick insulation and reliable Secop BD35 12/24V compressor ensure low power consumption. Blue LED interior lighting. Ready to install the Isotherm Smart Energy Control unit, which can reduce power consumption even further.
- Dimensions: 525 x 380 x 452 + 50 mm (door)
- Power consumption/24 h 265 W
- Brushed steel surface
- Thick insulation
- Low power consumption
JUNE DEAL
Zinc anode Isotherm
Zinc anode suitable for Isotherm devices, which protects the surfaces of the heat exchanger and other underwater metal parts from corrosion. The anode acts as a sacrificial shield and prevents electrochemical corrosion, especially when used in seawater.
Compatibility
Isotherm equipment
Corresponds to the original Isotherm spare part
Specifications
Material zinc
Weight 0.24 kg
Outer diameter 101 mm
Height 10mm
Inner diameter 42 mm
Mounting hole diameter 52 mm
Mounting hole diameter 5 mm
Additional information
Corresponds to original part number SBE00006AA / 39051
Installation and maintenance
Installed in the Isotherm device according to the manufacturer's instructions
The zinc anode must not be painted.
Check the anode regularly during maintenance
Replace the anode in time when it is clearly worn out.
A regularly replaced Isotherm zinc anode extends the life of the device and helps prevent damage caused by corrosion.
- Zinc oxide for Isotherm refrigerators
- Weight: 0.24 kg
- Diameter: 101 mm
- Height: 10mm
- Hole distance: 42 mm
- Mounting hole diameter: 52 mm
- Reinforcement hole diameter: 5 mm
- Corresponding original part number: SBE00006AA/39051
Mounting frame for 65 liter Isotherm refrigerator. Three sides.
Installation frame for Isotherm 65 litre refrigerator. Three sides.
