Liros

LIROS Handy-Anchor. 16-strand anchor rope made of polyester with lead weight. Very suitable for use without a chain, as the weight of the lead encapsulation gives the same effect. Flexible and pliable. Durable and UV-stabilized. Supplied in a LIROS anchor bag, made of Canvas. One end has a stainless steel shackle and the other end is tackled using waxed thread.

Always soft, Flexible, Comfortable to handle, Durable, Supplied in an anchor bag, Flexible due to its own structure, Not suitable for anchor windlasses

The rope has 10 meters of lead at one end, and the remaining 30 or 40 meters is normal rope.

Strong anchor rope bag with a drainage hole in the bottom.

Tensile strength

• 10mm - 2000Kg
• 12mm - 2600Kg
• 14mm - 3600Kg
• 16mm - 5000Kg

Convenient buoy mooring for boats weighing up to approximately 4 tons

Pre-assembled Mooring-Master buoy rope. A buoy anchoring package with abrasion-resistant four-ply polyethylene rope, with lead embedded in each strand. The purpose of the Mooring Master buoy rope is to protect the bottom vegetation and the rope by keeping the rope off the bottom between the buoy and the bottom anchor. The Mooring Master buoy rope is supplied as a kit containing all the necessary components.

The lower part of the rope is pre-assembled at the factory and equipped with a pipe collar and a shackle for attachment to a bottom anchor. The height of the float above the bottom depends on the depth of the water — usually 1.5–3 meters is a good rule of thumb. A cable lock should be installed above the float as a stop.

The package includes:

• Pipe shackle 20 mm, pre-assembled upon delivery
• Shackle 20 mm, pre-assembled upon delivery
• Float, pre-installed upon delivery
• Cable lock 14 mm, pre-installed upon delivery
• Buoy rope with integrated lead, 4-strand, 20 mm
• Shackle 20 mm, for final installation on the buoy
• Shackle 20 mm, for final installation
• Cable lock 14 mm, 2 pcs, for final installation
• Installation instructions

Rope abrasion protection against wear and tear. The package contains 2 abrasion protectors and comes with UV-protected cable ties.

Reduces the risk of children, animals, etc. falling overboard. High quality, knotted railing net with reinforced edge. Made of 2mm strong polyamide.

Lirolen mooring rope

Tensile strength:

• 6mm - 600Kg
• 8mm - 1000Kg
• 10mm - 1500Kg
• 12mm - 2120Kg

LIROS Handy-Anchor is a 16-strand anchor rope made of polyester with a built-in lead weight. It is well suited for use without a chain, as the lead weight helps the rope to settle. The rope is flexible and durable, and is UV-resistant. It comes with a fabric storage bag. There is a stainless steel grommet at one end.

The rope has 10 meters of lead at one end, and the remaining 30 or 40 meters is regular rope.

100% Dyneema SK-78, braided and treated with Liros Heat Stretch and impregnated with LIROS Coating. D-Pro offers the highest tensile strength to weight ratio, very low elongation and minimal "creep". Due to its structure, D-Pro is very easy to splice. D-Pro can replace cables in many technical applications. 12-braided construction.

Features:

• Working elongation < 1%
• Highest tensile strength in relation to size
• Good wear resistance
• The best choice for extreme tensile strength requirements
• UV-resistant
  

Extremely durable and UV-stable 8-strand polyester rope. Suitable for flagpole cord, fishing line, throwing rope, etc. Soft and pleasant to handle.

A rope specially developed for lazy jack systems. The compact design makes it very easy to terminate the loops during installation.

Intelligent buoy mooring for boats weighing up to approximately 4 tons

Pre-assembled Mooring-Master buoy rope. A buoy anchoring package with a rope made of abrasion-resistant four-layer polyethylene, with lead embedded in each strand. The purpose of the Mooring Master buoy rope is to protect the bottom vegetation and the rope by keeping the rope afloat between the buoy and the bottom anchor.

The Mooring Master buoy rope is supplied as a kit containing all the necessary components. The lower part of the rope is pre-assembled at the factory and has a pipe collar and a shackle for attachment to a bottom anchor.

The height of the float above the bottom depends on the depth of the water — usually 1.5–3 meters is a good rule of thumb. A cable lock should be installed above the float as a stop.

The package includes:

• Pipe shackle 20 mm, pre-assembled
• Shackle 20 mm, pre-assembled
• Float, pre-installed
• Cable lock 14 mm, pre-installed
• Buoy rope with integrated lead, 4-strand, 20 mm
• Shackle 20 mm, for final installation on the buoy
• Shackle 20 mm, for final installation
• Cable lock 14 mm, 2 pcs, for final installation
• Installation instructions