Mercury
Mercury -ryhmän tuotteet

Short-shaft electric outboard motor
The new Avator outboard motor from Mercury offers unparalleled performance combined with a comfortable and quiet boating experience in a natural environment.
The Mercury® Avator™ 7.5e electric outboard is a powerful and user-friendly engine that delivers clean, quiet power. It’s easy to install with a quick-connect battery and intuitive control panel. Plus, it has built-in technology that monitors both battery level and range, so you don’t have to worry about getting back to shore. The information is presented on a stylish color display that’s optimized for reading in all lighting conditions. This reliable engine makes it easy to get where you want to go on the water.
The Mercury Avator has several advanced features, including a 1 kWh lithium-ion battery that requires no wiring to connect to the motor. The battery easily snaps into place under the folding top case.
The Avator's handlebar design is multi-functional and adjustable for optimal operator comfort. The adjustable handle can be adjusted up, down, left or right. The handle can also be folded down to act as a convenient carrying handle when moving the motor from the boat to and from shore.
The Avator utilizes powerful Tvansverse Flux motor technology that delivers high torque with minimal effort, maximizing battery life and range while delivering fast and efficient performance.
The Avator's propeller is made of durable composite material. Its three-blade design maximizes thrust for longer battery life with minimal noise and vibration.
The motor is made of corrosion-resistant material, so you can safely boat in both fresh and salt water.
- Power: 916W
- Power at the propeller shaft: 750 W
- Voltage: 48V
- Battery: Built-in 1 kWh
- Battery type: Li-Ion
- Battery IP rating: IP67
- Charger (standard): 110 W
- Total weight (without battery and transom mount): 16.7 kg
- Total weight without battery: 19.5 kg
- Battery weight (1 kWh): 7.6 kg
- Steering: Handle
- Rig length: 381 mm (short rig)
- Standard propeller: 12.7 x 7P
- There is a 3-year warranty on the motor and a 2-year warranty on the battery and charger.

Service kit Mercury 40–60 EFI
Mercury Original 100 Hour Service Kit for 40-60 EFI (4-cylinder) engines.
The kit includes all necessary parts for basic maintenance.
Contents:
Oil filter
High and low pressure fuel filter
Oil plug gasket
OEM number: 8M0090558
Fits the following engines (according to serial number):
35 HP EFI Jet (4-cyl.): 1C453840 >
40 HP EFI (4-cyl.): 1C453840 >
40 HP EFI Jet (4-cyl.): 1C453840 >
40 HP EFI SeaPro (4-cyl.): 1C453840 >
50 HP EFI (4-cyl.): 1C453840 >
60 HP EFI (4-cyl.): 1C453840 >
60 HP EFI SeaPro (4-cyl.): 1C453840 >
- Mercury original part
- For Mercury 40-60EFI, 4 cylinders
- Service kit 100 hours
- OEM 8M0232733

Oil plug seal QS Mercury
Genuine Quicksilver / Mercury oil plug seal for Mercury MerCruiser drives and most Mercury and Mariner outboards.
Does not fit Verado models or Japanese-made Mercury/Mariner engines.
Suitable for oil screws with a 3/8-16 thread.
OEM: 19183K02
Previous OEM numbers: 19183Q02, 19183Q03
Fits the following engines and drives (according to serial number):
Mercury / Mariner outboard motors
8–9.9 HP
0G760300 > OT999999
1B000001 >
10-15 HP (Magnum / Marathon / Sea Pro / Viking)
0G760300 > OT999999
OP017000 > OP325499
OP325500 >
20–25 HP
2-cylinder, Carb and JET
0T980000 >
1B000001 >
30–40 HP
2- and 3-cylinder
Carb, EFI and JET
0G760300 >
OP017000 >
1B000001 >
45–60 HP
3-cylinder and BigFoot
Carb and JET
0G760300 >
OP017000 >
65–90 HP
3-cylinder
Carb, EFI and JET
0G760300 >
1B000001 >
115–125 HP
4-cylinder
Carb and EFI
0G760300 >
1B000001 >
Jet Drive engines
240 EFI Jet Drive
Powerhead and pump: 0E406400 >
250 DFI Jet Drive
Powerhead and pump: 0E407100 >
- For stern oil prop
- Quicksilver original
- 4pcs/pack

Service kit Mercury 75–115 EFI 1.7L
Mercury Original 100-Hour Service Kit for 75-115 EFI (1.7L) engines.
The kit contains the parts needed for basic maintenance.
Contents:
Oil filter
Fuel filter
Oil plug gasket
OEM number: 8M0097856
Fits the following engines (according to serial number):
75 HP EFI: 1B366823 – 2B094995
80 HP EFI: 1B366823 – 2B094995
80 HP EFI: 0P459572 – 2B094995
90 HP EFI: 1B366823 – 2B094995
100 HP EFI: 1B366823 – 2B094995
100 HP EFI: 0P459572 – 2B094995
115 HP EFI: 1B366823 – 2B094995
- Mercury original part
- Mercury 75-115 EFI, 1.7L
- Maintenance kit 100h

300-hour service kit for Mercury 40, 50 and 60 EFI engines (4-cylinder). This service kit includes everything needed for a basic 300-hour service, including an impeller. Just add oil.
The set includes:
* Impeller with seal
* Thermostat
* Spark plug
* Wedge anodes
* Anode plate
* Fuel filter
* Oil filters and more
OEM number: 8M0113483
The kit is specifically designed for the following Mercury four-stroke engines:
35 HP EFI Injector 4 Cylinder [1C453840 and newer]
40 hp EFI 4-cylinder [1C453840 and later]
40 HP EFI Injector, 4 Cylinders [1C453840 and newer]
40 HP EFI SeaPro 4-Cylinder [1C453840 and later]
50 hp EFI 4-cylinder [1C453840 and later]
60 hp EFI 4-cylinder [1C453840 and later]
60 HP EFI SeaPro 4-Cylinder [1C453840 and later]
- Maintenance kit 300h
- For Mercury 40-60 EFI engine
- 8M0113483

Fuel hose that is perfect for Yamaha, Mariner and Mercury engines, models 1987 and up.
- For Yamaha, Mariner, and Mercury engines. Models 1987 and up.
- Connection at the motor end
- Length 2m
- Diameter 8 × 13mm

Mineral oil for Mercury 4-stroke outboard engines in the size range 2.5 - 60hp.
- Size: 4 liters
- Specifically developed to meet the requirements of all 4-stroke outboard engines.
- Developed to protect against the stresses of the seawater environment.
- Proven good lubricating properties; protects the engine from corrosion and wear.
- Low temperature viscosity properties allow for easy starts even in cold weather.
- Anti-cracking additives prevent oil quality deterioration.
- The improved composition is based on demanding, durable additives.
- API operating requirements in categories SJ, CF-2 and CH-4.

Mercury 300-Hour Service Kit for Mercury Verado 135-200 hp four-cylinder outboards. The kit contains the essential service parts needed for an extended 300-hour service interval, including a water pump repair kit, filters, spark plugs, thermostat kit, drive belt and anode kit. In addition to the kit, engine oil is required for service.
Regular scheduled maintenance helps maintain reliable engine operation, cooling, and performance. Check compatibility by engine model and serial number.
Maintenance kit contents
- Oil filter
- Low pressure fuel filter
- High pressure fuel filter
- Oil plug gaskets
- Spark plugs
- Thermostat set
- Water pump repair kit with impeller
- Drive belt
- Anode set
Compatibility
- Mercury 135 HP EFI Verado 4 CYL Serial Numbers 1B517159 - 2B576734
- Mercury 135 HP EFI Verado 4 CYL Serial Numbers 0P514869 - 0P593020
- Mercury 150 HP EFI Verado 4 CYL Serial Numbers 1B517159 - 2B576734
- Mercury 150 HP EFI Verado 4 CYL Serial Numbers 0P514869 - 0P593020
- Mercury 175 HP EFI Verado 4 CYL Serial Numbers 1B517159 - 2B576734
- Mercury 175 HP EFI Verado 4 CYL Serial Numbers 0P514869 - 0P593020
- Mercury 200 HP Verado 4 CYL Serial Numbers 1B517159 - 2B576734
- Mercury 200 HP Verado 4 CYL Serial Numbers 0P514869 - 0P593020
Specifications
- Product type 300 hour service kit
- Engine series Mercury Verado
- Engine type four-cylinder
- Power class 135–200 hp
- OEM number 8M0130835
- Engine oil is not included in the set.
- 300 h maintenance kit
- Fits Mercury Verado 135–200 (L4) engines
- Product number: 8M0130835

Impeller Repair Kit Mercury EFI, Verado & Optimax
Mercury's original water pump repair kit with impeller . The kit contains all the parts needed to rebuild the engine's water pump.
Contents:
Impeller
Base plate
Wedge
Packing
The impeller should be replaced regularly according to the engine manual. The impeller wears out with use and can dry out over time. A worn impeller or leaking water pump can prevent the engine from cooling properly, which can lead to overheating.
The impeller alone is available under the spare part number 82051 .
OEM number: 8M0100527
Previous OEM numbers: 8M0100526, 43026K06, 43026T5
Fits the following engines and drives (according to serial number):
ALPHA ONE (GEN II)
1991–1995: OD469859–OF679999
1996–1997: OF680000–OK999999
1998 : OL100040 -
Outboard motors:
30 HP
30 HP Carb 3-cyl.: OP153500 – OP400999
30 HP Carb 3-cyl.: 0T409000 – 1B226999
30 HP Carb 3-cyl.: 0G760300 – OT408999
30 HP Carb 3-cyl.: 0P017000 – OP153499
40 HP
40 HP Carb 3-cyl.: 0P153500 – OP400999
40 HP Carb: 0G760300 – OT408999
40 HP EFI 4-cyl.: 1C000001 – 1C050251
40 HP EFI Jet 4 cyl.: 1C051324 – 1C453839
50 HP
50 HP EFI 4-cyl.: 1C000001 – 1C050251
50 HP EFI 4-cyl.: 1C050252 – 1C453839
60 HP
60 HP EFI 4-cyl.: 1C000001 – 1C050251
60 HP EFI 4-cyl.: 1C050252 – 1C453839
75 HP
75 HP EFI: 1B172291 – 1B366822
75 HP 3-cyl. (1.5L): 0T980000 – 1B226999
75 HP 3-cyl. (1.5L): 1B227000 – 1B417701
80 HP
80 HP Jet 3 cyl. (1.5L): 1B586067 – 1B736885
90 HP
90 HP EFI: 1B172291 – 1B366822
90 HP 3-cyl. (1.5L): 0T801000 – 1B226999
100 HP
100 HP EFI: 1B227000 – 1B366822
115 HP
115 HP EFI: 1B227000 – 1B736885
135 HP
135 HP EFI Verado 4-cyl.: 1B381712 – 1B517158
150 HP
150 HP EFI Verado 4-cyl.: 1B381712 – 1B517158
175 HP
175 HP EFI Verado 4-cyl.: 1B381712 – 1B517158
200–300 HP Verado (6-cyl.)
200 / 225 / 250 / 275 / 300 HP: 1B517434 – 2B144122
350 HP
350 HP SCi Verado: 1B716557 – 2B143542
400 HP
400 HP 2.6L L6 Verado: 2B618256 – 3B342962
450 HP
450R HP 4.6L V8 Racing: 1E083006 – 1E099720
- Repair kit with impeller
- For Mercury EFI, Verado and Optimax
- Original part
- OEM No.: 8M0100526

Mercury timing belt that fits 30-60 hp four-stroke engines according to the list below.
Replace the timing belt according to the engine instructions. A timing belt that breaks while running will cause downtime and possibly serious engine damage.
The timing belt is of the original design and has the OEM number 8M0151040. It fits the following engines:
30hp
* 30 EFI, 3-cylinder, 526 cc, 4-stroke, model year 2006 – later (worldwide)
Serial number: 0T409000 – 1B226999
Serial number: 1C109093 – Later
* 30 EFI, 3-cylinder, 4-stroke, 2002–2005 (Worldwide)
Serial numbers: 0P153500–0P400999
* 30 hp, 3-cylinder, 4-stroke, 1998–2001 (Belgium)
Serial numbers: 0P017000–0P153499
* 30 hp, 3-cylinder, 4-stroke, 1998–2001 (USA)
Serial number: 0G760300 – 0T408999
* 30 hp, 3-cylinder, 4-stroke, 2001–2005 (Belgium)
Serial numbers: 0P153500–0P400999
* 30 hp, 3-cylinder, 4-stroke, 2001–2005 (USA)
Serial number: 0T409000 – 1B226999
40hp
* 40 EFI injector, 4-cylinder, 4-stroke, later (worldwide)
Serial number: 1C051324 – Later
* 40 EFI, 3-cylinder, 747 cc, 4-stroke, model year 2006 – later (worldwide)
Serial number:
* 0P401000 – 0P515896
* 0T409000 – 1B226999
* 1B227000–1B344398
* 1C000001–1C049738
* 1C049739 – Later
* 0P153500–0P400999
* 40 EFI, 4-cylinder, 995 cc, 4-stroke, model year 2006 – later (worldwide)
Serial number:
* 0P153500–0P400999
* 0P401000 – 0P515896
* 0P515897 – Later
* 0T409000 – 1B344306
* 1C000001–1C050251
* 1C050252 – Later
* 40 hp, 3-cylinder, 747 cm³, four-stroke, 2001–2005 (Belgium)
Serial numbers: 0P017000–0P153499
* 40 hp, 3-cylinder, 4-stroke, 1998–2005 (USA)
Serial number:
* 0G760300 – 0T979999
* 0T980000 – 1B209735
* 40 hp, 3-cylinder, 4-stroke, 1999–2005 (Belgium)
Serial number:
* 0P017000 – 0P325499
* 0P325500 – Later
* 40 hp, 4-cylinder, 4-stroke (model year unknown)
Serial number:
* 0P094500 – 0P206999
* 0T178500 – 0T598999
50hp
* 50 Bigfoot, 4-cylinder, 4-stroke, 1995–2000 (Belgium)
Serial numbers: 0P017000–0P094499
* 50 Bigfoot, 4-cylinder, 4-stroke, 1995–2000 (USA)
Serial number: 0G760300 – 0T178499
* 50 EFI, 4-cylinder, 995 cc, 4-stroke, model year 2006 – later (worldwide)
Serial number:
* 0P153500–0P400999
* 0P401000 – 0P515896
* 0P515897 – Later
* 0T409000 – 1B344306
* 1C000001–1C050251
* 1C050252 – Later
* 50 hp, 4-cylinder, 4-stroke, 1995–2002 (Belgium)
Serial numbers: 0P094500 – 0P206999
* 50 hp, 4-cylinder, 4-stroke, 1995–2002 (USA)
Serial numbers: 0T178500–0T598999
60hp
* 60 EFI, 4-cylinder, 995 cc, 4-stroke, model year 2006 – later (worldwide)
Serial number:
* 0P153500–0P400999
* 0P401000 – 0P515896
* 0P515897 – Later
* 0T409000 – 1B344306
* 1C000001–1C050251
* 1C050252 – Later
* 60 hp, 4-cylinder, 4-stroke, 2001–2002 (worldwide)
Serial number:
* 0P094500 – 0P206999
* 0T178500 – 0T598999
- Timing belt
- For Mercury 30-60 hp engines
- 8M0151040

Reliable Performance for Boating
Benefits and features:
- Excellent protection against wear, cracking and corrosion
- Extends the life of the camshaft and other engine parts
- Withstands very heavy use
- Protects the engine at high temperatures and ensures maximum performance
- Advanced rust inhibitors – exceeds industry standards
- Well suited for boat use, even for engines that are used less frequently
Recommended use:
- This oil is suitable for all Mercury FourStroke outboards up to 300hp and is also a good option for V12/600hp engines.
Three important things:
- Suitable for all four-stroke boat engines – outboards, sterndrives and inboard engines
- Protects the engine and maintains viscosity for a long time
- A high-quality engine oil developed by Mercury Marine, the result of over five years of research
Note: This oil is intended for marine engines and should not be used in cars.
- Mercury 4-stroke, up to 300hp
- Excellent protection for the engine
- Fully synthetic

Mercury 300-hour service kit for newer Mercury EFI 4-stroke outboards with 2.1-liter engine block. The kit contains the essential service parts required for a 300-hour extended service interval, including the water pump impeller. Engine oil is required for the service in addition to the kit.
Regular scheduled maintenance helps maintain reliable engine operation, cooling, and performance. Check compatibility by engine model and serial number.
Maintenance kit contents
- Impeller and seals
- Thermostat
- Wedge anodes
- Anode plate
- Fuel filter
- Oil filter
- Spark plugs
- Oil plug gaskets
Compatibility
Fits the following Mercury four-stroke engines from serial number 2B095049:
- Mercury 65 HP EFI Jet
- Mercury 75 HP EFI
- Mercury 75 HP EFI SeaPro
- Mercury 80 HP EFI
- Mercury 80 HP EFI Jet
- Mercury 90 HP EFI
- Mercury 90 HP EFI SeaPro
- Mercury 100 HP EFI
- Mercury 115 HP EFI
- Mercury 115 HP EFI SeaPro
Specifications
- Product type 300 hour service kit
- Engine type Mercury EFI four-stroke
- Engine block 2.1 l
- From serial number 2B095049 onwards
- OEM number 8M0097855
- Engine oil is not included in the set.
- 300 h maintenance kit
- For newer Mercury 75–115 EFI engines
- Product number: 8M0097855

Emergency stop switch for smaller Mercury outboards. One part is attached to the driver and the other to the engine, which automatically shuts off the engine if the driver falls out of the boat. An excellent solution if the original deadman's grip is lost or damaged.
OEM number: 823054Q
Previous OEM number: 823054
Fits the following engines (according to serial number):
2 HP
2 HP Carb: 0R131842 – 0R504789
2.5HP
2.5: 0G710613 – 0T894576
2.5: OP017000 – OP400999
2.5: 0T894577 ?
2.5: 0A855097 – 0G710612
2.5: OP401000 ?
3.3 HP
3.3: 0G710613 – 0T894576
3.3: OP017000 – OP400999
3.3: 0T894577 ?
3.3: OP401000 ?
3.3: 0D901217 – 0G710612
3.5HP
3.5 HP Carb: 0R131842 ?
3.5 HP Carb JCI: 0R568285 ?
4 HP
4 HP Carb: 0R067090 – 0R411837
4 HP Carb: OP401000 – 0R411837
4 HP Carb: OP073456 – OP400999
4 HP Carb: 0R000001 – 0R067089
4 HP Carb: 0R411838 ?
5 HP
5 HP Carb: 0R067090 – 0R411837
5 HP Carb: OP401000 – 0R411837
5 HP Carb: OP073456 – OP400999
5 HP Carb: 0R000001 – 0R067089
5 HP Carb: 0R411838 ?
5 HP Carb JCI: 0R560794 ?
5 HP Propane: 0R936270 – 1R280495
6 HP
6 HP Carb: 0R067090 – 0R411837
6 HP Carb: OP401000 – 0R411837
6 HP Carb: OP073456 – OP400999
6 HP Carb: 0R000001 – 0R067089
6 HP Carb: 0R411838 ?
8 HP
8 SeaPro (2-cyl., International): 0N014717 – 0N055109
8 (2-cyl., 2-stroke, International): 0N027903 – 0N055109
8 (2-cyl., International): 0N055110 ?
8 SeaPro (2-cyl., International): 0N055110 ?
9.8 HP
9.8 (2-cyl., International): 0N007788 – 0N055109
9.8 SeaPro (2-cyl., International): 0N055110 ?
9.9 HP
9.9 (2-cyl., International): 0N260037 ?
9.9 (2-cyl., International): 0N059858 ?
15 HP
15 (2-cyl., International): 0N001590 – 0N055284
15 HP Carb SeaPro: 0R051685 – 0R123564
15 HP Carb SeaPro: 0R123565 ?
15 (2-cyl., International): 0N055285 ?
18 HP
18 (2-cyl., International): 0N001590 – 0N055284
18 (2-cyl., International): 0N055285 ?
20 HP
20: 0T894577 ?
25 HP
25 (2-cyl., International): 0N018456 – 0N055504
25 HP Carb SeaPro: 0R051710 ?
25 (2-cyl., 2-stroke, International): 0N055505 ?
25 Jet (2-cyl., 2-stroke, International): 0N088578 ?
30 HP
30 (2-cyl., International): 0N001875 – 0N055504
30 (2-cyl., 2-stroke, International): 0N055505 ?
30: 0A855097 – 0G710612
- Emergency switch/dead man's switch
- For Mercury outboard motors 2.5–6 hp
- Original part

Service kit Mercury 150 EFI 3.0L
Mercury's original 100-hour service kit for 135 and 150 EFI (3.0L) engines.
The kit includes all necessary parts for basic maintenance.
Contents:
Oil filter
High-pressure fuel filter
Low pressure fuel filter
Oil plug gasket
OEM number: 8M0094232
Fits the following engines (according to serial number):
150 HP EFI: 1B905505 ?
150 HP EFI SeaPro: 2B131939 ?
135 HP EFI: 2B131942 ?
105 HP EFI Jet: 3B672358 ?
- Mercury original part
- Mercury 150EFI 3.0L
- Maintenance kit 100h
- OEM 8M0094232

Outboard motor oil for Mercury 4-stroke outboard motors in the size range 2.5 - 60hp.
- Size: 1 liter
- Specifically developed to meet the requirements of all 4-stroke outboard engines.
- Developed to protect against the stresses of the seawater environment.
- Proven good lubricating properties; protects the engine from corrosion and wear.
- Low temperature viscosity properties allow for easy starts even in cold weather.
- Anti-cracking additives prevent oil quality deterioration.
- The improved composition is based on demanding, durable additives.
- Clearly exceeds API operating requirements in categories SJ, CF-2 and CH-4.





