MultiMarine
MultiMarine -ryhmän tuotteet
A sturdy boat stand for motorboats with a maximum weight of 2000kg, which you can bolt to long beams or the floor. The wooden side supports automatically adjust to the bottom of the boat.
NOTE! ONLY DELIVERY AS A HOME PACKAGE OR PICK UP FROM THE STORE.
- Maximum weight 2000kg
- Hot-dip galvanized steel
- Side supports that adapt to the base
- 1pc front stand + 1pc rear stand
- Front stand dimensions: Width 42cm, Height 45cm, Depth 50cm, Weight 10kg
- Tailgate dimensions: Width 130 cm, Height 55 cm, Depth 50cm, Weight 15kg
Vake Antifreeze 50/50 is a ready-to-use, plant-based antifreeze for winter preservation of various boat systems. The product is an alternative to traditional glycol and helps protect systems from freezing, frost damage and corrosion during winter storage.
The ready-mixed 50/50 solution can be used as is without dilution and is particularly suitable for winter preservation of water tank systems. The ready-to-use antifreeze can also be used in tanks, sewage systems, toilets, heating systems and engines, for example.
Effective protection for winter storage
Vake antifreeze protects boat systems when temperatures drop. The ready-to-use 50/50 mixture provides frost protection down to approximately -23°C, and the product does not need to be diluted before use.
The product also has lubricating properties that help protect seals, pumps and valves during winter storage. The product also does not form corrosive acids when in contact with water and oxygen.
Versatile application
Ready-to-use Vake antifreeze 50/50 is suitable for winter preservation of water, sewage, toilet, heating and engine systems on boats. It can also be used in motorhomes and holiday homes.
In water tank systems, the product is used as is, pre-mixed.
- Quantity: 4 liters
- Ready-to-use 50/50% mixture – no need to dilute
- Protects down to -23 degrees
- Plant-based and biodegradable
- For water tank systems and winter storage
- Plant-based and biodegradable
- Protects against freezing and corrosion
- Gentle on seals, pumps and valvesv
Oil change pump 9 liters
Manual oil change pump with integrated collection tank. The device sucks the oil using a vacuum created in the tank by a hand pump. The oil flows directly into a tank with a measuring scale, making it easy to monitor the oil level.
Use
Suitable for sucking up engine oil
Not suitable for use with gasoline or other fuels
Product information
Tank capacity: 9 liters
Manual hand pump
Automatic overfill prevention
Includes 3 suction hoses:
Diameters: 5 mm, 6 mm and 7 mm
Connection hose included
- To remove oil from the engine
- Volume 9 liters
- Complete set
3/4 inch cone.
• Stainless steel control ball
• Diameter: 280 mm
- Good general purpose anchor
- Also good on a bottom covered with vegetation
- Easily digs into the bottom
- Maximum weight load: 90kg
- Height: 108cm to the top of the handle. 100cm to the top of the motor mounting plate
- Maximum width: 56cm
- Depth: 69cm
- Pneumatic tires: 260x85mm
- Max weight (load): 90kg
- Wooden board
- Steel pipes
The concentrate can be mixed with water as needed to achieve the desired frost resistance. The product is particularly suitable for winter storage of marine engine seawater systems.
Adjust frost resistance as needed
The antifreeze is mixed with water according to the desired freezing point. A 30% mixture provides protection down to about -9.5°C, a 50% mixture down to about -23°C and a 60% mixture down to about -35°C.
The product also has lubricating properties that help protect seals, pumps and valves during winter storage.
For winter storage
Multimarine antifreeze is suitable for winter storage of engines, heating systems, tanks, sewage systems and toilets, among other things. The product is primarily intended for winter storage of systems.
For water tank systems, we recommend the pre-mixed MultiMarine Antifreeze 50/50 product.
- Quantity: 4L
- Antifreeze concentrate
- For winter storage
- Replaces glycol
- For winter storage of boat engines
- Mix with water according to desired frost resistance
- A 30% mixture provides protection down to about -9.5°C, a 50% mixture down to about -23°C and a 60% mixture down to about -35°C.
- Protects against freezing and corrosion
- Plant-based and biodegradable
Manual oil changer with collection tank. Sucks in liquid using vacuum. A hand pump creates vacuum in the tank, which sucks the oil into a graduated container. Not for use with gasoline, only for engine oil.
Includes 4 different sized suction hoses with inner diameters of 4, 6, 8 and 10mm and a length of 1 meter.
- Oil change pump
- 6L tank
- Vacuum pump
- It is recommended to run the engine before draining the oil.
• Good grip surface
• Diameter 350 mm
- Stainless steel
- Suitable for diameters 16-28mm
- Quick and easy installation
MultiMarine Toilet Fresh has a mild and pleasant scent and is not harmful to metals, plastics or rubber.
- Cleans and prevents odors
- For septic tank
- Pleasant scent
- Easy installation
- For engines with wing nut bolts
MultiMarine Systemrens is developed to clean cooling systems, heat exchangers and engine cooling channels. It easily dissolves limescale, rust and salt deposits, increases the flow of the cooling system and improves cooling. It does not damage plastic, metal or seals. Multimarine Systemrens is biodegradable.
- For cooling systems
- Increase flow in the cooling system
- Biodegradable
The valve is made of stainless steel. The valve can be opened and the product is fixed with 6 screws, which are not included in the package.
Screw holes: 4mm
Glass diameter: 146mm
Outer diameter: 185mm
Handles: 50 x 15mm
- Stainless steel
- Diameter 185mm
Small and space-saving 12V vacuum cleaner with a long cord and 12V cigarette lighter connection.
The vacuum cleaner has a removable collector and comes with two nozzles that ensure optimal cleaning on all surfaces.
Specifications:
- Cable length: 4.5 meters
- Suction power: 5000PA
- Power: 70W
- Filter: HEPA filter
- Weight: 610 grams
- Dimensions (L x W x H): 40 x 8 x 8cm
- 12V
- 4,5m johto
- 70W / 5000PA
Volt and ammeters with digital numbers. A small, handy instrument that works well in existing electrical panels or as an accessory where you need a quick overview of the voltage in your electrical system.
- 6-30 volts
- 0-10 amps
- Outer diameter 36mm
- Perforation 30mm
Rust protection and preservative for the cooling system.
Instructions:
Run fresh water through the engine cooling system.
Mix coolant protectant with water in a ratio of 1:10.
Important: The engine must reach a temperature that will allow the thermostat to open to protect the entire cooling system.
Note: The fluid should be drained when there is a risk of freezing.
- Rust protection
- For the cooling system
- Preservative
Electric Gear Pump 8L
Key Features of the Electric Gear Pump
The Electric Gear Pump 8L is designed as an efficient and compact solution for transferring liquids. The pump has a built-in switch for easy and intuitive operation. In addition, the included pike jaw clamps improve user comfort and make connecting the device to a power source effortless.
Thanks to the gear mechanism, the pump offers a smooth and efficient transfer capacity even in challenging conditions. This makes it an excellent choice for transferring oil and other applications where reliability and performance are essential. The available capacity is 8 liters per minute, which allows for fast and smooth operation.
The compact external dimensions (151 x 78 x 95 mm) make this pump easy to move and install in almost any environment. The lightweight design combined with the electric operation makes it a versatile tool for both professionals and hobbyists.
Applications and suitability for different engines
This pump is particularly suitable for removing oil from engines, for example for servicing motorcycles, boats and other vehicles. It is often necessary to drain the engine of oil before winter storage, and this pump is designed to make the procedure faster and easier. Due to its practicality, it is suitable for both petrol and diesel engines.
The smooth operation of the pump and the efficient gear design allow it to be used for other fluid transfer, such as pumping hydraulic oils and other lubricants. It is ideal for situations where precise control and a steady flow are required.
Thanks to its ease of use, the pump is suitable for both professionals and home users. Whether it is boat maintenance, machine maintenance or hobby vehicle maintenance, this pump offers a reliable solution for handling oil and other fluids.
Technical data: power, capacity and dimensions
The technical characteristics of the electric gear pump make it an efficient and reliable solution for a wide range of needs.
Power supply : The 12 V pump is equipped with a 4A current consumption, making it compatible with many common battery systems.
Capacity : The fluid transfer capacity is up to 8 liters per minute, which is enough for effortless and fast operation in any situation.
Connection : The pump has a 3/8" (14 mm) connection, making it compatible with most oil hoses and connecting components.
The pump's compact size (151 x 78 x 95 mm) makes it easy to install and transport. This small but powerful device is designed for durable use and demanding conditions. Its lightweight design makes it easy to transport from one place to another without extra effort.
Installation instructions and tips for use
Installation is easy and straightforward. Attach the pike jaw clamps to the power source and ensure that the pump is correctly connected to the fluid hose. Before first use, we recommend filling the pump with a small amount of oil, which ensures optimal sealing and improves suction power. This preparation also extends the life of the device.
The user must ensure that the fluid to be pumped is compatible with the pump materials. Do not use the pump for corrosive fluids or other harmful chemicals that may damage its operating mechanisms. Operation is optimal when the ambient temperature is suitable and the temperature of the fluid to be pumped does not exceed the manufacturer's recommendations.
When the pump is not in use, disconnect it from the power source and store in a dry place. Clean the pump regularly and ensure that the fluid hoses are securely connected before the next use. This reduces wear and ensures a long life for the device.
Frequently asked questions about the electric oil pump
What liquids can the pump handle?
The pump is best suited for oil and other non-corrosive liquids. Do not use it for chemicals that may damage its gear mechanism.Does the pump need to be primed before use?
Yes. We recommend filling the pump with a small amount of oil before first use. Priming improves suction efficiency and protects the pump from wear.Is the pump easy to install?
Yes. The pump is designed for quick and easy installation. The included pike jaw clamps make connection to the power source easy. Following the installation instructions will ensure safe and efficient use of the device.
- Current: 4A 12V
- Capacity: 8l/min
- Connection: 3/8" - 14mm
- Dimensions: 151x78x95mm
MultiMarine canopy cleaner is a water-based cleaner developed for the marine environment and intended for removing mold, moss and green algae from tarpaulins, sprayhoods and other rough textiles. The surface must be dry before application.
MultiMarine canopy cleaner is diluted in water 5-20% depending on the dirtiness of the cover. For rough cleaning, the product is applied undiluted with a spray bottle or sponge. Leave to act for 5-10 minutes and then brush with a damp sponge or brush.
Rinse thoroughly with fresh water. Shake before use, do not use on textiles that easily shed color. Frost sensitive. Supplied with spray nozzle.
- Water-based detergent
- Mold stain remover
- Suitable for tarpaulins, spray hoods and other coarse textiles
Simple design with no moving parts. Holds the chain in place and releases the chain. Complete with a rope that is attached to the boat's cleat.
- Suitable for 6-8mm chains
