Owatrol
Owatrol -ryhmän tuotteet

Clear wood impregnation oil for boat wood and hardwood materials with a matte silk finish.
- A transparent, “oily” matte finish, a glossy appearance can be achieved by finishing with Marine D-2 if necessary.
- Does not form a film, does not peel off, does not come off in pieces
- For exterior and interior surfaces – decks, hulls, trim, cockpit, furniture, etc.
- Suitable for all types of wood – teak, mahogany, pine, oak, larch, etc.
- Excellent primer for traditional coatings both above and below the waterline.
The following jar sizes are available:- 1 Liter
- 2.5 Liters
- 10 Liters
- Coverage when impregnating wood: 1-4 m2/l
- Suitable for wood materials with a matte silk finish
- Coverage in maintenance work: 8-12 m2/l
- Storage: Unused oil is poured into a smaller container and sealed airtight.

- Anti-rust oil that can also be used mixed with paint. Colorless, penetrates directly through rust and isolates rust from healthy metal surfaces.
Penetrates down to the healthy metal surface and removes air and moisture - Forms a protective and insulating film that can withstand temperatures up to +175ºC
- Can be used as an additive for oil-based paints, varnishes and stains.
- Mixing ratio: 25% per liter for the first layer or 50% if the surface is smooth or porous
- Makes oil-based paints, varnishes and stains rust-inhibiting, making them easier to apply
- Replaces thinners, does not evaporate
- Increases the opacity of surface treatments
- Basic treatment agent for all surfaces.
- Use on the first floor
- Adheres to all flat surfaces: glass, PVC, ferrous metals and other metals
- It is possible to cover aluminum, galvanized steel and zinc-containing surfaces without pretreatment
- For creating an atmosphere - maintains a rusty look
- Preserves surface rust but protects underneath
Links:
Safety data sheet
Available pack sizes:
0.5 liters- 1 liter
- 5 liters
- 1-component
- For all surfaces
- Replaces thinners
- Three pack sizes: 0.5L, 1L, 5L
- Anti-rust oil that can also be used mixed with paint.
- Penetrates down to the healthy metal surface and removes air and moisture
- Forms a protective and insulating film that can withstand temperatures up to +175ºC
- Can be used as an additive for oil-based paints, varnishes and stains.

Penetrates deeply into the surface. Restores the color and shine of faded and dull surfaces.
- Excellent for gelcoat and paint surfaces, can also polish metal
- Protects against corrosion
- 1L

- High gloss surface oil for wood. Creates a high gloss mirror finish. Use this as a finishing treatment over Owatrol D-1 impregnation instead of varnish.
High-gloss surface, enhances the natural beauty of the wood - Long-lasting flexible film, does not peel off, does not come off in pieces
- Easy to maintain, no need for intermediate sanding between layers
- Suitable for all types of wood – oak, ash, teak, mahogany, larch, etc.
- Exterior surfaces – impact surfaces, handles, cab, booms, masts, etc.
- Interior surfaces – furniture, seating, etc.
The following pack sizes are available:
1 liter- 2.5 liters
- 1-component
- High gloss
- Suitable for all types of wood
- Available in two different sizes
- Application: apply at least 4-6 generous coats
- Allow to dry for at least 12 hours between coats (no sanding required between coats)
- Let it dry for 3-4 days before using the boat.

DILUNETT® is an effective, water-washable, solvent-free paint stripper that removes all oil- and alkyd-based paints, varnishes or stains.
DILUNETT® removes up to eight layers of paint in one go. DILUNETT® is suitable for virtually all surfaces, including wood, metal, plastic and reinforced plastic. Its gel-like consistency means it does not drip, making it ideal for use on vertical surfaces and detailed plaster or wood surfaces. Easy to use, DILUNETT® dissolves paint in even the smallest cracks and fine details. It softens all layers of paint, making paint removal easy. VOC-free and non-flammable, DILUNETT® is safe to use in poorly ventilated or confined spaces.
- Solvent-free – no toxic fumes
- Easy to remove with water
- DILUNETT® is suitable for all surfaces except aluminum
- Does not damage plastic. Safe for gel surfaces
- Removes up to eight layers of paint in one go
- Does not evaporate – long service life
- Easy to apply. Non-drip gel
- For outdoor use only
- Removes varnishes, stains, paints...
- Suitable for metal, wood, plastic, gel surface, stone, cement…
- Horizontal or vertical surfaces

Anti-rust primer for extreme conditions. Long-lasting anti-rust effect.
- 1-component primer
- Suitable for new or heavily oxidized surfaces
- A rust inhibitor that can be applied over many different types of 1- and 2-component paints: polyurethane, epoxy, rubber, automotive paint...
- Excellent for harsh climatic conditions (corrosive gases, marine conditions, etc.), withstands temperatures up to +175ºC

Oil remover and cleaner for all wood materials. Effectively removes old wood oil from deep within the wood. The product is ready to use and easy to apply. Within 10 – 15 minutes the oil has dissolved and can be brushed off. Follow-up treatment is carried out with Owatrol Deck Sealer. Suitable for decks, garden furniture and wood cladding, for example.
- Removes oil and “dirt film” from wooden materials (wooden materials can darken due to inappropriate or insufficient protection)
- Suitable for removing linseed oil, teak oil, etc.
- Cleans traces of stress caused by UV radiation and weather changes
- Deeply cleans and removes darkened oils and stains, making buildup water-soluble
- Neutralize wooden surfaces after treatment with Deck Cleaner, reducing reflective marks left by woodworking visible on new wooden surfaces.
- Bottle size 2.5L
- Suitable for decks, garden furniture and wood cladding

- Very effective, removes up to 8 layers of paint in one go
- Easy-to-apply gel, long-lasting removal function, no dripping
- Removes varnishes, stains, paints, antifouling paints
- Does not damage plastics, safe to use on gelcoat surfaces
- Does not affect 2-component or heat-set paints, polyurethane paints or varnishes
- Solvent-free paint remover
- For removing paints and toxic paints
- Non-flammable, does not contain toxic fumes
- Easy to rinse off with water
- Not suitable for aluminum
- Quantity: 1 liter

Teak oil, especially for teak decks and garden furniture, protects and enhances wooden surfaces.
- Colorless and odorless – matte appearance
- Maintains the natural beauty of the wood
- Does not form a film, does not peel, does not crack
- Easy to maintain, no scraping or sanding required
The following jar sizes are available:
- 0.5 Liters
- 1 Liter
- 2.5 Liters
- Suitable for both indoor and outdoor use.

High-quality, effective impregnation oil for softwood materials. Colorless, long-lasting oil for wooden structures. Protects, for example, teak boat decks, garden furniture, fences, terraces, etc. Contains UV protection.
- Based on natural oils
- Non-film forming, transparent “oily” matte finish
- Maintains the natural beauty of the wood
- Will not crack or peel
- Does not darken due to UV radiation
- Easy-care surface, no sanding or scraping required
- Suitable for decking, upholstery
- Suitable for most wood species – pine, Souglask fir, larch, etc.
The following jar sizes are available:- 1 Liter
- 2.5 Liters
- 10 Liters
- Based on natural oils
- Non-film forming, transparent “oily” matte finish
- Maintains the natural beauty of the wood
- Will not crack or peel
- Does not darken due to UV radiation
- Easy-care surface, no sanding or scraping required
- Suitable for decking, upholstery
- Suitable for most wood species – pine, Souglask fir, larch, etc.

Floetrol is an acrylic solvent that converts water-based paints (including stains) into oil-based paints.
Adding the substance allows for longer drying times and better glide of the paint on the surface to be painted. It also removes brush marks.
- For brush and roller use: add approximately 7-15% per liter of paint
- For spray use: at least 50ml (max 100ml) per liter of paint

1-component cleaner and polish for fiberglass surfaces and weathered wood surfaces. Fast-acting.
- Removes surface dirt and soil residue and restores a bright, vibrant appearance to fiberglass surfaces and weathered wood surfaces
- Lightens and restores the original color of grayed wood species without bleaching
- An excellent degreaser suitable for removing grease from tropical wood species before treatment with Marine D-1 impregnation agent.
- Does not damage the wood grain or pattern
- Removes rust stains and neutralizes the effect of Marine Strip
- Removes rust stains from concrete, stone and wood.
- Bottle size: 2.5L
- Suitable for fiberglass surfaces

Floetrol is an acrylic solvent that converts water-based paints (including wood stains) into oil-based paints. Adding the substance allows for longer drying times and better glide of the paint on the surface to be painted. It also removes brush marks.
- For brush and roller use: add approximately 7-15% of the substance per liter of paint
- For spray use: at least 50ml (max 100ml) per liter of paint

- Interior and exterior surfaces
- Horizontal and vertical surfaces
- Gates, fences, structural steel, roofing, storage tanks, trailers…
- Car parts – exhaust pipes, bumpers, wheels…
- Machines, pumps, electrical parts, pipes, boat bilge...
- All wooden surfaces
- Excellent weather resistance
- Safe to use in confined spaces – does not produce hazardous fumes
- Withstands temperatures up to 175°C after curing
- Excellent light and heat reflection properties
- Adheres exceptionally well to clean, bright metal
- Sandblasted or steel grit blasted surfaces do not require immediate paint application – light rust surface
- does not affect product performance or end result
- Can be used on all ferrous and non-ferrous metals – aluminum, copper, steel, iron…
- Galvanized surfaces do not require abrasion or pickling before applying paint
- Glossy surface
- Very flexible – will not crack, chip or peel

- 200 ml


