Polymarine

Suitable for repairing PVC inflatable boats, resistant to seawater and hot conditions.

PVC or Hypalon – How do I know what material my boat is made of?

• Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
• Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.

Polymarine's two-component PVC glue is a complete repair kit for PVC-based inflatable boats, such as RIBs, SIBs, dinghies and SUP boards. The kit includes professional-grade two-component glue, two-color reinforced PVC fabric and the necessary supplies to make a durable and beautiful repair. With primer, hardener, brush, stick and clear instructions, you are ready to repair your boat quickly and permanently. A compact and handy kit that is perfect for taking with you.

Contents:
1 × 125 ml Polymarine 3062 PVC adhesive (part A)
1 × 5 ml hardener (part B)
1 × 10 ml 2903 primer and cleaner
1 × PVC fabric reinforced, light grey (A6)
1 × PVC fabric reinforced, white (A6)
1 × brush
1 × stick
1 × pair of disposable gloves

Area of ??application: PVC inflatable inflatables (RIB, SIB, tender, SUP)
Result: Permanent and professional repair

Polymarine Sealflex is a flexible, water-based sealant specifically designed to repair small, invisible leaks and holes in Hypalon and PVC inflatable boats. Its acrylic-latex based formula creates a strong, airtight film on the inside of the material. The product is simply applied through the valve, then the boat is rolled to distribute the liquid evenly and seal any weak spots. Sealflex can also be used during fabrication to brush the inside of seams and reinforce the seal. One 500ml bottle is sufficient for approximately an 8-9 foot dinghy.

Polymarine's 2-component adhesive Hypalon is a complete repair kit for Hypalon-based inflatable boats, RIBs and even neoprene materials such as wetsuits. The kit includes professional 2-component adhesive, reinforced Hypalon fabric in two colors and all the necessary accessories for a durable and safe repair. With primer, hardener, sandpaper, brush and clear instructions, you can quickly and easily make a high-quality repair. A compact kit that is perfect to always have on your boat.

Contents:
1 × 125 ml Polymarine 2909 Hypalon adhesive (part A)
1 × 5 ml hardener (part B)
1 × 10 ml 2903 primer and cleaner
1 × Hypalon fabric reinforced, medium grey (A6)
1 × Hypalon fabric reinforced, white (A6)
1 × brush
1 × pipe stick
2 × sandpaper
1 × pair of disposable gloves

Use: Hypalon, RIB and neoprene
Result: Permanent and professional repair

Polymarine reinforced PVC sheet in A4 size is a durable repair material that has been specially developed for repairing inflatable boats, dinghies and RIBs. It is made of PVC-coated fabric. The material provides a strong and reliable repair for holes, tears and wear, and is easy to work with in combination with a suitable PVC adhesive. The perfect spare material on the boat or in the workshop for quick and durable repairs.

Polymarine Flexithane 500ml black – Restoration paint for Hypalon and rubber fabric.

Polymarine Flexithane is a high-quality paint specifically developed for the restoration and refinishing of inflatable boats made of Hypalon, PU-coated fabric and other rubber-based materials. The paint combines extreme flexibility with very good adhesion and durability, making it ideal for both aesthetic refinishing and long-term protection.

Flexithane is highly elastic and stretchable, and will not crack or flake, even on live, pressurized and UV-exposed surfaces. Thanks to its high coverage, one coat is usually sufficient for perfect color reproduction, while a second coat provides a smoother satin finish and increased durability.

The paint is supplied ready to use and does not require thinning – shake or stir it thoroughly before application. It dries quickly and is touch dry after approximately 5 minutes at 20°C, making the job both smooth and efficient.

Flexithane is not only used for the renovation of Hypalon boats and RIBs, but also for resealing and protecting railings and profiles that are otherwise at risk of chalking or powdering over time.

A 500 ml can is usually enough for two areas of approximately 4–5 m².

For best results, the surface should be cleaned and primed with Polymarine Flexithane thinner before painting. Spray painting is possible in professional use using appropriate protective equipment and Polymarine Flexithane thinner.

Polymarine Flexithane is a proven choice for those looking to give their Hypalon boat a new lease of life with a durable, professional and long-lasting finish.

Polymarine PVC Glue is a strong polyurethane-based adhesive that bonds excellently to both soft and hard PVC, as well as nylon and polyurethane fabrics. It has been specially developed for inflatable boat repairs and works with materials such as Zodiac/Bombard Dynalon and Strongon and Narwhal/Valiant Hypertex . The glue is easy to use as a single-component adhesive for quick, temporary repairs. It bonds in just 10-15 minutes and cures fully in 48 hours. For larger or permanent repairs, Polymarine’s two-component adhesive is recommended.

Polymarine Flexithane 500ml grey – Restoration paint for Hypalon and rubber fabric.

Polymarine Flexithane is a high-quality paint specifically developed for the restoration and refinishing of inflatable boats made of Hypalon, PU-coated fabric and other rubber-based materials. The paint combines extreme flexibility with very good adhesion and durability, making it ideal for both aesthetic refinishing and long-term protection.

Flexithane is highly elastic and stretchable, and will not crack or flake, even on live, pressurized and UV-exposed surfaces. Thanks to its high coverage, one coat is usually sufficient for perfect color reproduction, while a second coat provides a smoother satin finish and increased durability.

The paint is supplied ready to use without mixing – shake or stir it thoroughly before application. It dries quickly and is touch dry after approximately 5 minutes at 20°C, making the job both smooth and efficient.

Flexithane is not only used for the renovation of Hypalon boats and RIBs, but also for resealing and protecting railings and profiles that are otherwise at risk of chalking or powdering over time.

A 500 ml can is usually enough for two areas of approximately 4–5 m².

For best results, the surface should be cleaned and primed with Polymarine Flexithane thinner before painting. Spray painting is possible in professional use using appropriate protective equipment and Polymarine Flexithane thinner.

Polymarine Flexithane is a proven choice for those looking to give their Hypalon boat a new lease of life with a durable, professional and long-lasting finish.

Polymarine Juniorkit is a practical cleaning kit for RIBs and inflatable boats. The kit contains everything you need to clean and finish your boat. The powerful inflatable boat cleaner removes dirt, oxidation, grease, oil and fuel residues from both PVC and Hypalon materials. The inflatable boat finish is then applied to the surfaces, which protects and gives a smooth, fine surface without polishing. The product also helps prevent new soiling. The kit includes cleaning and finishing products, cloths, a nozzle and disposable gloves.

Contents:
1 × Inflatable boat cleaner, 500 ml (spray bottle)
1 × Inflatable boat finish, 250 ml
2 × polishing cloths
1 × spray nozzle
1 × pair of disposable gloves

For materials: PVC and Hypalon
Use: Cleaning and protection of RIB/inflatable boats

1-component Hypalon adhesive. Suitable for bonding inflatable boats and other inflatables made of Hypalon material.

PVC or Hypalon – How do I know what material my boat is made of?

• Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
• Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.

2-component adhesive for hypalon-made inflatable boats.

PVC or Hypalon – How do I know what material my boat is made of?

• Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
• Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.