Red Duty

Durable transparent tarpaulin. Hexagonal shape makes it easy to cover narrow-bowed boats. UV-stabilized transparent LD polyethylene. Reinforced with HD polyethylene. Eyelets every 50cm.

Strong quality boat cover. Made of double LD polyethylene and HD polyethylene reinforcement. The cover is UV protected.

The boat A-rack protects your boat during winter storage. The rack is equipped with quick connectors, making it very easy to assemble.

Strong T-pieces made of fiber-reinforced polyethylene with a 5-year warranty. The T-piece is a further development of the T-piece used for years and is now even stronger to better withstand the Finnish winter.

No screws that can get lost, no joints that can give way under load.

The tubes are made of durable aluminum with a diameter of 38 mm and a tube thickness of 2.1 mm.

Supplied as a complete set in a storage bag.

We supply standard kits for boats from 16 to 35 feet and can easily be expanded with additional tubes if you have a larger boat.

The stands have 4 legs (2 pairs of legs) that stand on the ground, as well as adjustable support legs that are placed in the boat. See the technical specifications to see how many legs are included in each package.

If desired, use a crossbar (see accessories) between the legs on the ground to prevent them from moving.

To prevent condensation and moisture from building up in the boat during storage, we recommend using two covers; a thin inner cover and a stronger outer cover. Condensation from the outer cover will then drip onto the inner cover instead of the boat. Make sure the cover has enough slope to allow rain and snow to slide off.

Specifications:

• 1pc peephole pipe 10.5m (7x1.5m)
• 1pc long leg 150-290cm
• 2pcs short leg 80-150cm
• 4pcs long legs for the ground 4.5m (3x1.5m)
• 1pc storage bag

General instructions:

It is recommended that you choose a cover that is slightly shorter than the stand. This will allow the A-stand brush bar to protrude from under the cover and not damage it.

Secure the rack firmly so that it cannot move lengthwise or widthwise. You can use thin rope, straps, buckles or similar.

Make sure the tarpaulin has an opening at the front and back to allow ventilation under the tarpaulin. This will help prevent moisture and mold. The opening should not be so large that the wind will catch too much on the tarpaulin.

Tighten the ropes around the tarpaulin well and check the situation after 1-2 weeks.

To extend the life of the cover, it is recommended to use an elastic rope or other flexible tightening method, such as an elastic strap. This will protect the boat cover fasteners in strong winds.

Regular inspection of the rack and cover during the storage period is recommended.

The boat A-rack protects your boat during winter storage. The rack is equipped with quick connectors, making it very easy to assemble.

Strong T-pieces made of fiber-reinforced polyethylene with a 5-year warranty. The T-piece is a further development of the T-piece used for years and is now even stronger to better withstand the Finnish winter.

No screws that can get lost, no joints that can give way under load.

The tubes are made of durable aluminum with a diameter of 38 mm and a tube thickness of 2.1 mm.

Supplied as a complete set in a storage bag.

We supply standard kits for boats from 16 to 35 feet and can easily be expanded with additional tubes if you have a larger boat.

The stands have 4 legs (2 pairs of legs) that stand on the ground, as well as adjustable support legs that are placed in the boat. See the technical specifications to see how many legs are included in each package.

If desired, use a crossbar (see accessories) between the legs on the ground to prevent them from moving.

To prevent condensation and moisture from building up in the boat during storage, we recommend using two covers; a thin inner cover and a stronger outer cover. Condensation from the outer cover will then drip onto the inner cover instead of the boat. Make sure the cover has enough slope to allow rain and snow to slide off.

Specifications:

• 1 piece crane pipe 12m (8x1.5m)
• 2pcs long leg 150-290cm
• 4pcs short leg 80-150cm
• 4pcs long legs for the ground 4.5m (3x1.5m)
• 1pc storage bag

General instructions:

It is recommended that you choose a cover that is slightly shorter than the stand. This will allow the A-stand brush bar to protrude from under the cover and not damage it.

Secure the rack firmly so that it cannot move lengthwise or widthwise. You can use thin rope, straps, buckles or similar.

Make sure the tarpaulin has an opening at the front and back to allow ventilation under the tarpaulin. This will help prevent moisture and mold. The opening should not be so large that the wind will catch too much on the tarpaulin.

Tighten the ropes around the tarpaulin well and check the situation after 1-2 weeks.

To extend the life of the cover, it is recommended to use an elastic rope or other flexible tightening method, such as an elastic strap. This will protect the boat cover fasteners in strong winds.

Regular inspection of the rack and cover during the storage period is recommended.

The transparent plastic cover is perfect for protecting your boat from dust, paint and polish splashes. It also protects against moisture under the cover. It is easy to use and install on boats and measures 4.6 x 7.5 meters. Elasticated elastic all around for a secure fit and easy installation. With the cover you can rest assured knowing that your boat will stay clean and protected.

Elastic band with a tarpaulin clip on one end and a plastic hook on the other. Easily attaches to the tarpaulin loop. Package contains 4 pcs.

Additional support for the cover rack on the brush tube. With the support, you can easily build a more sturdy structure for the rack.

Installed at the end of a brush tube or support leg.

Crossbar for Red Duty A-rack. Used between support legs that rest on the ground. The support prevents the legs from sliding apart.

Telescopic leg for blanket rack 150-280cm with railing bracket.

The leg is equipped with a T-piece that is mounted on the rack's rail tube and a railing bracket that is attached to the boat's railing tube.

Strong T-piece, made of fiber-reinforced polyethylene. The T-piece is a further developed version of the previous model and is now even more durable to better withstand Finnish winter conditions.

Strong handrail bracket made of fiber-reinforced polyethylene. The bracket is adjustable and fits handrail tubes with a diameter of at least 22 mm.

Additional support for the brush tube of the cover stand. With the support, you can easily make the stand more stable. The leg has a T-piece for attaching it to the crane tube.

A spare locking spring inside the brush tube, which allows the parts to be locked together.

Support leg for cover rack with T-piece ready for attachment to crane pipe.

Accessory kit for Red Duty cover racks for attaching legs to the toe bar.

Strong T-piece for cover racks with 38mm tube.

The T-piece is a further development of the T-piece that has been used for years and is now even stronger to better withstand the Finnish winter.

End piece for brush tubes in tarpaulin racks.

Use this end cap to protect the ends of brush tubes in the rack to prevent the end of the tube from rubbing against the hole in the tarpaulin. Suitable for tubes with a diameter of 38 mm.

Made of composite.

An additional leg for the A-frame that is attached to the crossbar. The leg is adjustable and its length is 150-290cm.

Locking ring for tightening the telescopic leg of the cover stand.

End cap for the end of the cover stand leg. Protects the boat from sharp corners on the leg.