Roca
Roca -ryhmän tuotteet
Black painted stainless steel frame, suitable for 7mm flat mounting and 9mm hook mounting. Length 355 mm. Suitable for W5, W10, W12, W25, W38.
- Feather made of black painted stainless steel
- Suitable for 7 mm flat mounting and 9 mm hook mounting
- Many different lengths
Table top made of teak. The long sides fold up. Dimensions when opened 70x60cm, when folded 70x30cm.
- Dimensions when opened 70x60cm
- Folded 70x30cm
Double wiper arm, stainless steel
Suitable for Roca systems W10 and W12
Adjustable length
Electropolished
J-hook connection that fits almost all wiper blades on the market.
- Different lengths
- Suitable for engines with 14mm splined shaft.
- Suitable for: W10 and W12 systems
- Stainless
- Tabletop size when opened: 60 x 90 cm.
- Tabletop size when closed: 31 x 90 cm
- Manufacturer: Roca
The fan is secured with a locking plate when installed in a caravan. You can easily remove the locking plate with a screwdriver if necessary. Complete fan with stainless steel casing. Lockable in closed position. Adjustable 3-40mm (1/8”-1 5/8”) for covers or roofs. Screws included.
- Diameter 200mm
- Height 61mm
- Stainless steel cover
Strong 12 Nm torque aluminum-shelled waterproof IP65 wiper motor. 2-speed, self-returning either right or left, with a continuously adjustable wiping angle between 45 - 110º. The wiper shaft is made of stainless steel. Insulated, suitable for steel, plastic and wooden boats. Maximum recommended arm and blade combination 610/560 mm. 12 V, maximum installation thickness 16 mm.
- 2-speed, automatic positioning when turned off
- Heavy Duty motor, 12 Nm
- Shaft made of stainless steel
- Adjustable sweep angle: 45 – 110°
- CE approved, EMC protected
- Splashproof IP65
- Insulated grounding, suitable for metal, plastic and wooden hulled boats
- Sweeping capacity max. 610 mm x 560 mm / 24" x 22" arm/wiper combination
- 12VDC
- L1 = 16mm / 0.63”
- L2 = 42mm / 1.65”
For three motors 12-24VDC. Supplied with 1.5m cable and Carling® power switch with lighting.
Provides the following functions:
It takes up little space and is easy to install.
Material: Stainless steel (AISI304) / Aluminum
Surface: White lacquered
- For three engines
- Driver side engine or all three
- Synchronized Sweep: Interval (5 seconds), Low speed, High speed
- Wiping system
- Dimensions when opened 80x60cm
- Folded 80x30cm
– Heavy Duty motor, 12 Nm
– Shaft made of stainless steel
– Adjustable sweep angle: 45 – 110°
– CE approved, EMC protected
– Splashproof IP65
– Insulated grounding, suitable for metal, plastic and wooden hulled boats
– Sweeping capacity max. 610 mm x 560 mm / 24" x 22" arm/wiper combination
– 12 VDC
– L1 = 42 mm
– L2 = 68 mm
Teak grip handle, two curves.
- Length 58cm
- Teak
Wiper motor. Shaft and motor parts made of stainless steel. Adjustable 90° or 110°. Adjustable to stop position right or left. White powder-coated housing. 12 V.
Roca's waterproof windshield wiper motor produces a torque of 12 Nm. The Roca windshield wiper motor has an isolated grounding, which allows it to be used even on metal boats. The infinitely adjustable wiping angle from 45 degrees to 110 degrees for maximum visibility makes it highly appreciated by users.
Depth: 42 mm (L2) 16 mm (L1) Wiping angle can be easily adjusted after installation Adjustable self-parking left or right Shafts are made of stainless steel Voltage: 12VDC or 24VDC CE approved, EMC tested 2 speeds: 35 sweeps/minute, 55 sweeps/minute 100% waterproof housing (IP65) Max. arm/blade combination length 610 mm x 560 mm.
- 42mm axle
- 12V
- Black
- Electropolished stainless steel
- Submersible
- Overall diameter 87.5mm
- Mounting hole 69mm
- Height 47mm
Polypropylene valve, white.
- White plastic
- Two different sizes
- Manufacturer Roca
Durable angle iron made of electropolished stainless steel. Available in three sizes.
Stainless steel wiper arm, fits: W5 (6mm shaft). Adjustable length: 11-14"/280-355 mm. Matte black, with J-hook connection, fits almost all wiper blades on the market.
- Strongly constructed arm
- suitable for Ø 6mm shaft
- For sole: flat fastening 7mm
- Adjustable 280 – 360m
Adjustable wiper , fits Ø 14 mm knurled shaft. Black painted wipers are made of stainless steel. Blades with secure hook attachment.
- Hook attachment
- Length 474-612mm
- Painted stainless steel
Very sturdy platform support, working load 150 – 400 kg, polished stainless steel (AISI304)
Traditional and elegant teak flagpoles ensure long-lasting quality and classic style for your boat.
The wood's high oil content prevents it from rotting or warping, even in harsh marine environments where sun, wind and salt water put the wood to the test.
To preserve the natural beauty of teak, it is recommended to clean the product with a high-quality teak cleaner and oil it regularly with teak oil.
- Length: 1210mm
- Diameter: 32mm
- Teak
- Brass sleeve
- Will not rot or warp
- Manufacturer: ROCA
- Manufacturer's product code: 607562
Wiper motor with 5 Nm torque, including arm and blade, packed in consumer packaging. Shaft and motor parts made of stainless steel. Adjustable 90° or 110°. Adjustable to stop position right or left. White powder-coated housing. 12 V.
– handle 355 mm stainless steel, black
– feather 280 mm stainless steel, black
