Rorsman
Rorsman -ryhmän tuotteet
- Height: 90mm
- Width: 160mm
- Installation diameter: 60mm
- Different lengths
- Outer diameter 25mm
- Thickness 1.5mm
- Material: Stainless steel (AISI316)
- Excellent corrosion resistance
- Good weldability and formability
- Non-magnetic in the annealed condition
Adjustable wiper arm made of stainless steel. Fits, among others, windshield wipers 4991 and 5001. Base 7mm flat mount.
- Different sizes available
- 7mm flat mount
- Double arm
Brass drain plug.
Can also be left in the open position. Locking plate included.
- Different lengths
- Lengths 229-915mm
- Height 70mm
- Pipe diameter 25mm
Anchor light mast for boats 0-12m. Stainless steel. Two 8mm holes in the bottom for mounting.
Vent grille made of ABS plastic. Color black or white.
- Plastic
- External dimensions: 92x92mm
- Covers a hole 85x85mm
• Small and simple
• Diameter: 50 mm
- 90° branch
- For 25mm pipe
- Openable model
Outboard motor mount. Stainless steel mount and spring. Wooden base. NOTE! Always make sure the motor is also attached to the boat.
- Adjustable height difference 300mm
- Stepless adjustment with friction wheel
A handy motor mount for motors weighing up to 60 kg. The mount is infinitely adjustable in 4 stages using friction wheels. The base and spring are made of stainless steel, and the mounting plate is made of painted wood. NOTE! Always attach the motor to the boat.
- Maximum 60 kg
- Up to 25 hp
- Adjustable level difference 300 mm
- Wooden board Width: 200mm
- Height: 250mm
- Thickness: 35 mm
- Bolt hole: Ø 8 mm / CC 13 mm
Hose clamp with hose connector for 3" hose. Plastic, size 92 x 92mm. Color black or white.
- Plastic
- For 3" (75mm) hose
- Color: black or white
Aluminum telescopic support for boat covers. Attaches to the cover with a push button.
- Height: 810-1600mm
Teardrop-shaped flagpole holder made of stainless steel. Inclined and recessed design with three recessed screw holes.
Flagpole connector: Hole diameter: 25.5mm, depth: 48mm, mounting plate width: 65mm, length: 80mm, screw holes: 4.5mm, embedment dimensions: 31mm, embedment depth dimensions: 52mm.
- Embedded model
- Stainless steel
- Teardrop-shaped
Stainless steel valve grille, diameter 127mm or 102mm.
- Stainless steel
- Two different sizes
Cover valve with adjustable protective cap. Available with two different protective caps.
- Diameter: 200mm
- Hole: 100mm
- The valve itself is plastic
Available with two different protective covers:
- With adjustable stainless steel protective hood
- With adjustable plastic protective cap
Made of stainless, acid-resistant steel.
Mounted with M6 screws and washer (not included).
