Seaflo
Seaflo group products
/trem-huoltoluukku-5-eri-kokoa-067875bb4c4182.jpg)
Trem service hatches are made of durable plastic and have a solid rubber seal. A lock is available for the hatches, which can be ordered separately (9512066220).
The product is available in different sizes:
270 x 375 mm
- Internal dimensions 200 x 300 mm
357 x 606 mm
Internal dimensions 283 x 531 mm
370 x 375 mm
Internal dimensions 300 x 300 mm
- Different sizes
- Lock as an accessory
- Includes rubber seal
/seaflo-led-valonheitin-35w-valkoinen-069c11b5768887.webp)
The SEAFLO 35W LED floodlight is a powerful and versatile light for boating. It is designed to make it easier to navigate in the dark and helps, for example, find buoys, moorings or fairway markings in twilight or darkness.
The light produces a bright and powerful 2700 lumens of light and has a range of up to 400-800 meters. The spotlight can be rotated horizontally a full 360 degrees and vertically 60-75 degrees. This makes it easy to direct it to different situations. The included remote control and 4.6 meter cable allow you to use the device from a distance.
The device is made of durable ASA plastic. It is IP65 rated, meaning it is highly resistant to dust and splashes of water, making it ideal for boat and outdoor use.
Features:
360° horizontal rotation
60°–75° vertical movement
Powerful LED light, light output 2700 lumens
Light range 400–800 meters
IP65 waterproof rating
Made of ASA plastic
Long service life and easy installation
Color temperature 5500K (white light)
Operating voltage 10–30V
Includes remote control and 4.6m cable
- LED
- 35W
- Kantama 400-800m

Pump housing made of phenolic plastic. Shaft made of acid-resistant material. Impeller made of nitrile rubber. Blade for breaking up waste. Only use toilet paper suitable for septic tanks. Do not use dry.
- Length: 230mm
- Width: 108mm
- Height: 82mm
- Suction height: 1.5m
- Lifting height: 5m
- Cable cross-section: At least 6mm²
/485326936ba51c611f.jpg)
Freshwater electric toilet
The SEAFLO Quiet Flush is the perfect electric toilet for your boat – designed for comfort and quiet operation. Its advanced design and built-in soundproofing ensure a flush that is as quiet as a modern home toilet – perfect for when you don’t want to disturb your crew, even at night.
It easily connects to the boat's existing pressurized water system and uses fresh water for flushing, which reduces odors and improves hygiene.
Features
- Ultra-quiet flushing cycle – designed to minimize noise on the boat
- Easy-to-use one-button panel – flush and control water volume at the same time
- Compatible with pressurized water systems – requires only 13.5 L/min (3.5 GPM)
- Safety valve with anti-siphon – protects the domestic water system from contamination
- White ceramic bowl – soft-closing lid and modern design
- Built-in crusher pump – efficient and very quiet
- Made from corrosion-resistant materials – ideal for marine conditions
- Voltage: 12V
- Dimensions: 470 × 356 × 355 mm
- Connections: Inlet water 3/4" hose, outlet water 1" hose
- Large bowl
- Very quiet
- Type: Electric marine toilet
- Control: Panel with buttons
- Material: White ceramic bowl, soft
- Included: Solenoid valve, control panel

Seaflon 12V electric toilet with powerful macerator pump. Dual pump means no manual pumping or additional pump is needed, it handles both emptying the bowl and filling it with water. Porcelain bowl and lacquered wood lid. Simple rotary control for flushing and emptying only or emptying only. Compatible with Jabsco parts.
- 12V
- W450 x H323 x D415mm
- Intake: 19mm
- Outlet: 38mm
/seaflo-painevesipumppu-38l-12v-067875c2e69f5e.jpg)
Seaflo pressure water pump 3.8L 12V: Product list
Pressure water pump performance and flow capacity
The Seaflo pressure water pump 3.8L 12V offers excellent performance and is perfect for smaller water systems, such as boats, RVs and cottages. The pump has a maximum flow capacity of 3.8 liters per minute (1.0 GPM), which ensures consistent and efficient water consumption. This makes the pump a reliable solution when you need consistent water pressure for multiple applications.
The pump has a maximum working pressure of 2.4 bar, so it can provide sufficient water pressure for most small water systems. This ensures that showers, taps or other water-powered devices operate smoothly and user-friendly. In addition, the pump is designed to operate optimally at ambient temperatures up to +60 °C, making it suitable for a variety of applications.
The energy-saving 12-volt operating voltage and low current consumption – up to 2.5 amps – make this pump a cost-effective and environmentally friendly solution. This, combined with the pump’s lightweight construction, means the entire device weighs just 0.6 kilograms, making it easy to handle and transport.
Dual-chamber pump design and function
The Seaflo pressure water pump has a dual-chamber design that allows for precise and efficient water flow. The dual-chamber mechanism prevents water backflow, which improves pump performance and reduces pressure loss during operation. The pump is specifically designed for systems that can be connected to pressure switches, ensuring easy automatic operation according to pressure.
The pressure switch is seamlessly integrated into the pump structure, and its function is to automatically shut off the pump when the flow demand decreases or the shut-off valve is closed. This feature reduces wear and extends the life of the device, while increasing user comfort. The structure is sealed and splash-proof, making the pump a reliable choice even in the most challenging environments.
The materials have been designed for durability. The pump housing is made of corrosion-resistant materials to ensure safe and long-term operation. The overall structure and function have been optimized for the needs of small systems, ensuring consistent water flow and pressure in everyday use.
Installation requirements and compatible hose sizes
The Seaflo pressure water pump 3.8L 12V is easy to install as part of almost any small water system. The pump connector is compatible with hoses with a diameter of 9–10 mm (3/8”), which makes its integration smooth. It is important to pay attention to the correct dimensioning of the hoses and the tightness of the connections during the installation phase to avoid water leaks.
The pump's maximum suction height of 1.2 meters allows the pump to be placed slightly above the water level without significant performance losses. However, during installation, it must be ensured that there are no air leaks in the suction hoses, as they can reduce the flow capacity.
Installing the device requires a 12V electrical connection, which should be properly protected from moisture for safety reasons. The pump requires stable support and a location where it is not exposed to excessive vibration. During installation, it is recommended to use cushions or special mounting bases to dampen noise and vibration.
Frequently Asked Questions (FAQ) about the pressure water pump.
What applications is this pump suitable for?
This pump is ideal for use in small boat pumps, RVs, cottages and other similar water systems.Can the pump be used with hot water?
Yes, the maximum water temperature can be +60 °C. This is enough to cover most household and cottage needs.Is the pump noisy in use?
The pump is designed to be as quiet as possible, but proper installation and the use of cushions can further reduce the noise level.Can the pump run dry without damage?
Seaflo does not recommend running this pump dry for extended periods of time as this may damage the internal mechanism. It is recommended to ensure a continuous water supply during operation.
Technical data: suction head, voltage and dimensions
Suction head : Maximum 1.2 meters (4 feet). This allows the pump to be installed slightly above the water surface without losing performance.
Voltage : Operates on a standard 12 volt DC current and is therefore well suited to boat and RV systems.
Dimensions and weight : Compact dimensions and a light weight of 0.6 kg make the pump easy to install in small spaces. However, despite its small size, the pump has integrated powerful performance and reliable operation.
The Seaflo pressure water pump 3.8L 12V is designed to meet the versatile needs of small water systems - reliably and efficiently.
- Max temperature +60 C (140 F)
- Max amperage: 2.5 A
- Weight: 0.6Kg (1.3 lbs)
- 3.8l/min
- 2.4 bar
- 12 volts
- Connector: 9-10mm
- Suction height : Maximum 1.2 meters (4 feet).
/seaflo-sahkoinen-wc-pumppu-manuaalivessaan-067875c2e1130d.jpg)
- Conversion kit
- Suitable for Jabsco etc.
- 12V
- Connector diameter: 25.5mm
- 18A
/seaflo-merivesisuodatin-23-51l-067875c45d9934.jpg)
Seawater filter made of durable plastic. Easy to inspect through the transparent cover without removing the cover. Robust construction. Reduces dirt, bacteria, algae, rust, etc. Works well in combination with shower flanges.
Inlet and outlet with three different diameters:
13 mm, maximum flow 23 liters/minute
16 mm, maximum flow 35 liters/minute
19 mm, maximum flow 51 liters/minute
/overforingspump-batteri-seaflo-06af1e1f0617e6.jpg)
SEAFLO transfer pump with lithium battery
The SEAFLO transfer pump with built-in lithium battery makes transferring fuel and other liquids easy, fast and safe. The pump starts with a single push of a button and delivers up to 12 liters per minute. Suitable for both small engines and larger tanks.
The cordless and rechargeable design makes use effortless. The powerful 3.7 V motor allows for up to 2 hours of continuous use on a full charge. Safety is enhanced by overcurrent protection and a spark-proof motor.
A versatile and practical tool, especially suitable for environments where fuels or chemicals are handled.
Features
- Flow rate 12 liters per minute
- Maximum lifting height 3 meters
- Operating time up to 2 hours
- Suction pipe length 506 mm
- Hose length 1050 mm
- Built-in lithium battery 3.7 V
- Easy-to-use ON OFF button
- Ergonomic handle with integrated dispensing
- Spark-proof motor with overcurrent protection
- Hanging hooks for easy storage
- Replaceable hose
Applications
Suitable for the following liquids, among others:
- Petrol
- Diesel
- Coolant
- Light oil
- Cleaning agents
- Mild acids
- For gasoline, diesel and glycol
- Built-in lithium battery
- 12 l/min

Product description: Seaflo pressure water pump 18.9L 12V
Powerful and durable pressure water pump for versatile use
The Seaflo pressure water pump 18.9L 12V is designed to meet the highest expectations in water transfer and pressurization. Thanks to the sturdy construction of this pump, it is perfect for versatile applications, such as kitchens, toilets, showers or other water distribution systems. The pump also works reliably in multi-point systems, and can withstand the simultaneous water demand of up to four points of use.
The durable and long-lasting construction ensures that the pump works without problems even in the most challenging environments. Its ability to withstand dry running without damage increases the reliability of the product and makes it the perfect choice for those who need a reliable solution for varying conditions. Whether you are a boater, a summer resident or a professional, this pressure water pump is designed to make water pressurization effortless and efficient.
The Seaflo pressure water pump does not require a separate pressure tank, which minimizes the installation and maintenance costs of the system. Its automatic pressure sensor optimizes water flow and pressure according to the application, saving both water and energy.
Five-chamber pump design ensures high water flow
Seaflo’s advanced five-chamber pump design enables an impressive water flow of up to 18.9 liters per minute. This makes the pump an ideal solution for situations where a constant high water flow is required, such as in shower rooms, car washes or on boats. The flow capacity easily meets the needs of multiple points of use without compromising water pressure.
The innovative five-chamber pump system enables optimal performance and keeps the water pressure constant even at high loads. This reduces pressure fluctuations and improves operating comfort, which is important for professional or demanding leisure use.
The design also offers excellent durability and reliability. The materials have been selected to withstand both fresh and seawater, and the internal components of the pump are designed to minimize wear. This guarantees a long service life of the pump and ensures that it is suitable for use in a wide range of environments.
Quiet operation thanks to rubber-suspended installation
The Seaflo pressure water pump is designed to operate quietly and unobtrusively, thanks to its innovative rubber-suspended installation. This design solution effectively dampens the vibrations and noise generated by the pump, making it an excellent choice for both indoor and outdoor use.
Quiet operation makes the pump particularly suitable for use in environments where noise levels are an important comfort factor. Whether it is a cottage, boat or caravan, the Seaflo pressure water pump ensures a pleasant and undisturbed water use experience.
Furthermore, silence does not mean compromising on performance. The rubber-suspended installation reduces wear caused by excessive vibrations, which extends the life of the device. This makes the pump not only pleasant to use, but also a long-lasting investment.
Adjustable pressure for fresh and seawater
The adjustable pressure system of the Seaflo pressure water pump allows you to create precisely optimized water pressure. This feature makes the pump an excellent choice for a variety of liquids and environments, as it can be used to transfer and pressurize both fresh and salt water.
The user can adjust the pump's operation to their own needs, which significantly increases its versatility. The maximum pressure of 4.2 bar ensures sufficient performance even in the most demanding applications, and it is excellently suited for both domestic and professional use.
In addition to pressure adjustment, the pump's excellent performance combined with its durable construction makes it an ideal choice for boats, for example, whose systems use seawater. This increases operating comfort and significantly reduces the need for maintenance.
Frequently asked questions about the Seaflo pressurized water pump
Can the pump be used dry? Yes, the Seaflo pressurized water pump can withstand dry running without damage. This feature makes it particularly reliable in varying operating situations.
What liquids can the pump handle? The pump is suitable for transferring both fresh and salt water. The materials used in its construction are corrosion-resistant, and it works excellently for both domestic and marine use.
How does the pump's flow capacity suffice for multiple points of use? The pump has a maximum flow rate of 18.9 litres per minute, which is enough to supply up to four points of use simultaneously without significant pressure loss.
Is the pump easy to install? Yes, the pump is easy to install thanks to the pre-assembled connections and rubber-suspended installation. The operating instructions clarify the installation process.
What is the maximum operating temperature of the pump? The maximum operating temperature of the Seaflo pressure water pump is 60°C, which meets the requirements of most water heating systems.
- Maximum flow: 18.9 liters/minute
- Maximum current consumption: 15 amps
- Inlet and outlet: 13 mm 1/2" MNPT
- Maximum water temperature: 60 degrees
- Power: 12 volts
- 4.2 Bar

The accumulator tank is used so that the pressure water pumps do not have to start every time the tap is opened. Reduces power consumption, noise and wear on the pressure water pump. Built-in rubber diaphragm that does not require maintenance.
- Capacity: 1 liter
- Max flow: 8.6 liters/min
- Connections: 13mm
- Dimensions: 300x105mm
/seaflo-automaattinen-pilssipumppu-66l-12v-matala-067875c2c817e7.jpg)
Suitable for tight bilge spaces and can be installed horizontally or vertically.
- 360 degree swivel hose connector for 19, 25 or 29 mm hose.
- Flow: 66L/min
- Hose connection: 19/25mm / 28mm
- Voltage: 12V
- Power consumption: 4.2 amps
- Weight: 0.56 kg
- Fuse size: 5 A
/elektrisk-portable-dusch-069c135417a745.webp)
A convenient and powerful portable shower for those who want running water anywhere. The SEAFLO portable camping shower produces up to 10 l/min and has a built-in rechargeable battery that provides up to 40 minutes of use on a single charge. The shower pump features quick-connect fittings for easy installation, a built-in water filter and a suction cup for hands-free use. Perfect for camping, boating, caravanning, pet washing or emergencies.
- Portable shower with a flow rate of 10 l/min
- Rechargeable battery with 40 minutes of runtime
- Easy to charge with USB-C cable
- Built-in filter protects against dirt and particles
- Suction cup for secure attachment to smooth surfaces
- Portable shower with rechargeable battery
- Up to 40 minutes of use on a single charge
- Perfect for camping, boating and outdoor use

Seaflo pressure water pump 11L 12V
Versatile pressure water pump for the kitchen and bathroom
The Seaflo 11L 12V pressure water pump is designed to meet the diverse water needs of the kitchen and bathroom. Its automatic pressure sensor starts the pump when necessary and stops it when the water intake stops. This makes the pump easy to use and energy efficient, so that the water flow is optimal without unnecessary power loss.
The pump is suitable for use with both fresh water and seawater. It doesn't matter whether you use the pump in your motorhome, boat or summer cottage - Seaflo adapts to all needs. The pump's design also allows for the treatment of up to four water intake points simultaneously, so it supports the shower, tap and other water points at once effectively.
This pressure water pump is also very flexible to install; it does not require a separate pressure tank, which saves space and simplifies installation. With its ample flow capacity (11 liters per minute), Seaflo guarantees consistent water pressure and operation in all conditions.
Strong construction and dry-running resistance
The durability of the Seaflo 11L pressure water pump stands out. The pump's sturdy construction is designed for demanding conditions, such as boating and travel, where the equipment must withstand challenges such as constant movement, varying temperatures and high humidity. The materials have been selected to ensure a long service life and operational reliability.
A significant feature of the pump is its ability to survive dry-running without damage. This means that the pump will not be damaged even if the water supply temporarily stops. This is especially important in situations where constant supervision is not possible, such as at a summer cottage or on a boat. It provides peace of mind and reduces the risk of unnecessary repairs.
The pump is designed to withstand water temperatures of up to 60 °C, making it ideal for hot water use. This temperature resistance makes the pump a reliable solution for various applications in the kitchen, bathroom or outdoor areas.
Five-chamber pump for efficient water flow
Seaflo’s innovative five-chamber pump design provides a consistent and efficient water flow. This design provides better performance compared to traditional triangular chamber pumps, so even using multiple water intake points at the same time does not reduce water pressure or disrupt operation.
The pump achieves a maximum flow of 11 liters per minute, which is more than enough to use both a shower and a tap at the same time. The working pressure is adjustable and the pump can withstand a maximum pressure of 3.1 bar, providing flexibility for different water pressure needs. This adjustability makes it the perfect choice for modern kitchens and bathrooms.
In addition, the pump combines quiet operation with high performance, making it difficult to notice without closer inspection. The innovative chamber mechanism keeps the water flowing steadily and at optimal pressure – the end result is that users can enjoy seamless use without pressure fluctuations.
Rubber-suspended silent installation solution
Silence is one of the most important features expected from a good pressure water pump. The Seaflo 11L pressure water pump is equipped with an advanced rubber-mounted mounting solution that effectively dampens vibrations and noise levels during operation. This makes the pump comfortable to use and also suitable for more sensitive environments, such as indoor use in a cottage or motorhome.
The rubber mounting not only reduces noise but also improves the overall operation of the pump. Vibration damping protects the components of the device from wear and tear, thus increasing the pump's service life. A quieter pump also means more efficient energy consumption, as there is less loss in vibration.
This mounting solution also makes it easier to mount the pump in different environments. The pump can be flexibly installed without complicated procedures, and it remains stable even under heavy use. This results in a more pleasant user experience and a longer product life.
Frequently asked questions about the Seaflo pressure water pump
Can this pump be used in the shower and on the tap at the same time? Yes, the pump supports up to four water intake points at the same time without affecting the water pressure.
Is the pump safe to use with seawater? Yes, the Seaflo pressure water pump is designed to withstand both fresh water and seawater, making it ideal for boating, for example.
What if the pump runs without water? The pump is dry-running resistant, so it will not be damaged even if the water supply is temporarily interrupted. This feature provides additional safety in use.
What is the maximum water temperature the pump can handle? The pump has a maximum water temperature of 60 °C, making it suitable for both cold and warm use.
Is the pump's power consumption high? The pump's maximum power consumption is 8 amps, making it an energy-saving solution for 12V systems.
- Maximum flow: 11 liters/minute
- Maximum current consumption: 8 amps
- Inlet and outlet: 13mm 1/2' MNPT
- Maximum water temperature: 60 degrees
- Voltage: 12 volts
- 3.1 Bar

- Inlet connection 1 x 3/4" 1 x 3/4" or 1 x 1" 1 x 1 1/8" or 1 x 1 1/2"
- Outlet 3/4" or 1"
- Current consumption: 5A
- Flow: 47.5l/min
- Length: 340mm
- Height: 135mm
- Width: 215mm
/47447684aa7fa290a0.jpg)
The SEAFLO 28W LED spotlight is a powerful and practical light source for boating. It is ideal for situations where bright, long-range light is needed, such as navigating in the dark or finding an anchor.
The Strålkastin produces 2700 lumens of light output and has a light range of up to 300-400 meters. The light can be rotated 360 degrees horizontally and 60 degrees vertically, making it easy to direct. The included remote control and 4.5 meter cable allow you to conveniently control the device from a distance.
The device is made of durable and highly corrosion-resistant ASA plastic, making it excellently resistant to the demanding conditions of the marine environment. The remote floodlight is also splash-proof according to the IP65 classification.
Features:
Power 28W
Operating voltage 10–30V
Light output 2700 lumens
Color temperature 5500K
Light range 300–400 meters
360° horizontal rotation
60° vertical movement
IP65 waterproof rating
Made of weather-resistant ASA plastic
Includes remote control and 4.5m cable
Easy to install
- LED
- 28W
- Range: 300-400 meters
/seaflo_lansman_pilssipumppu_220l_12v-067d4303c3ea1f.picture_manager_67d42fc060469.jpg)
The pump is equipped with a removable base and bottom filter, which makes cleaning it quick and easy. This feature increases the pump's lifespan and improves its performance. In addition, the pump can withstand occasional dry running, so you can rely on it even when the water level fluctuates.
Maximum flow: 220 liters/min
Outlet diameter: 38mm
Power: 12 volts
Maximum consumption: 25 amps
Protection: 25 amps
Power cord: 1m
- Flow: 220 l/min
- 12 volts
- Removable bottom strainer

Seaflo Pressure Water Pump System 11.3L 12V
The Seaflo Pressure Water Pump System is a versatile and high-quality solution that ensures consistent water pressure and flow in households, boats and motorhomes. This pressure water pump is specially designed for durability and ease of use, and it works reliably even in demanding conditions. Learn more about the features, installation methods and maintenance tips of this product below.
Seaflo pressure water pump technical features
The Seaflo pressure water pump system operates on 12 volts and offers a maximum flow rate of up to 11.3 liters per minute, making it ideal for use in a variety of applications. Its maximum pressure is 2.4 bar, ensuring consistent and sufficient water pressure for multiple simultaneous applications. The inlet and outlet connections are standard 13 mm (1/2" MNPT), making it easy to connect to existing systems.
The pump has a built-in pressure tank and adjustable pressure regulator, allowing you to control the water flow and pressure according to your needs. The device is also equipped with a filter for filtering the incoming water, which protects the internal parts of the pump from impurities and extends its service life. The current consumption is 11 amps, and it should be protected by a 12 amp fuse (not included in the package).
An important feature of the Seaflo pump is its ability to withstand dry running without immediate damage. This is a particularly useful feature, increasing the reliability of the device in emergency situations or when water conditions change suddenly.
Installation and compatibility in different systems
The Seaflo pressure water pump system is supplied pre-assembled on a mounting plate, making it simple and quick to install. Its compact and ergonomic design allows for installation even in tight spaces, such as on boats, motorhomes or small domestic systems. The included instructions make the installation process clear and straightforward, and the necessary additional components are available from most specialist retailers.
The pump's 13 mm inlet and outlet connections are compatible with a wide range of hose and pipe systems. This universal connection size ensures that the pump can be easily integrated into many existing plumbing and water supply systems. Whether it is a domestic water supply or a technical system on a boat, this pump adapts seamlessly to its environment.
The device is specifically designed to operate on 12 volt electrical systems, making it perfect for boats, motorhomes and systems powered by solar power. However, we remind you to follow the included installation instructions and recommended cabling to ensure safety and long-lasting performance.
Operating characteristics: flow, temperature and pressure
The Seaflo pressure water pump enables a steady flow of water at a maximum of 11.3 liters per minute. This sufficient capacity ensures smooth and balanced water distribution for a wide range of applications, from showers to kitchen taps. The pump has a maximum pressure capacity of 2.4 bar, which is suitable for most domestic and vehicle water systems.
The maximum operating temperature of the device is 60 °C, which also allows it to be used in hot water systems. This makes the pump an ideal solution for both cold and hot water distribution systems, including showers and hot water tap applications. The temperature resistance also ensures that the pump can function in more challenging conditions, such as the special conditions of a boat or motorhome.
The pump's start and stop noise level has been optimized for user-friendliness, which means that both start and stop noise are minimized. This makes the Seaflo pump an excellent choice when comfort and silence are priorities.
Frequently Asked Questions (FAQ) about the Seaflo pressure water pump
Can the pump be run dry without damage? Yes, the Seaflo pressure water pump can withstand short periods of dry running without damage, but prolonged dry running should be avoided.
How do you adjust the pump's pressure on/off function? The pressure is adjusted using the pump's built-in adjustable switch. More detailed instructions can be found in the installation manual that comes with the product.
Can the pump be used for warm water? Yes, the pump can withstand a maximum water temperature of 60 °C, so it can also be used in warm water systems.
Maintenance instructions and dry-running durability
Regular maintenance is important to ensure the long life of your pump. Check the inlet water filter regularly and clean any deposits or debris. This will ensure that the pump operates smoothly and provides uninterrupted flow over the long term.
Although the Seaflo pump is resistant to dry running, it is recommended to avoid running the pump without water for long periods of time. Dry running can cause wear to the seals and internal components, which can lead to reduced performance. Even the short dry-running feature is designed for emergency situations, not for continuous use.
We recommend that you carry out a seasonal maintenance of your pump at least once a year. This includes checking the pump connections, checking for any leaks and a thorough inspection of the internal components and seals. This will ensure that the pump continues to operate efficiently and for a long time, even under demanding conditions.
- 11.3 liters per minute
- 2.4 bar
- 12 volts
/22746aad4ee7c162e.jpg)
/20426aad28b2cc42e.jpg)

/499636a99538bc1469.jpg)