Suzumar

Suzumar inflatable boat with air bottom

A modern, really nice and high-quality 2-3 person inflatable boat with great details. A practical rope lock is installed in the bow, which is not found on other boats of this size!

The boat's structure is divided into five independent air chambers with spring-loaded valves, and with the included foot pump, the boat fills up in about 5 minutes.

The pontoons are divided into three different parts; the bow section and independent sections on each side, as well as an inflatable keel + inflatable inner bottom.

The boat can be transported/stored in the standard carrying bag. When you fold the boat, all you need to do is remove the oars, open the valves, remove the seat and roll the boat from stern to bow and the boat will deflate itself and it will be packed in no time.

There are four chrome-stainless steel lifting points inside the boat (2 attached to the transom and two on each side of the bow pontoon), in addition, there are chrome-stainless steel towing/lifting brackets directly at the bow and on each side of the bow. With the help of high-quality D-brackets and lifting points, you can easily lift the boat onto the deck or swimming platform by using tautlines, halyards or lifting/pulling.

Very stable and safe to drive thanks to the large pontoons and the boat always runs straight thanks to the inflatable air keel. The MX-265 is an excellent auxiliary boat for a larger boat or as a small cottage boat for children, for example!

• Original wooden bench supplied with Suzumar inflatable boats. The wooden bench has hooks on the bottom edges that attach to the loops on the pontoons when the boat is fully inflated.
  
  Different Suzumar models have their own benches:
  DS-360 / DS-390 bench, length 100cm

• DS-230 / DS-265, length 152cm
• DS-320 / DS-360 / DS-390, length 162cm

An inflatable extra seat is a good solution for an inflatable boat. An inflatable seat is comfortable to sit on, is easy to move, and takes up little space when deflated.

Additional seats available for different Suzumar models:

• DS-230
• DS-265 / DS-320
• DS-360 / DS-390

Engine protection plate outside the transom.

Inflatable boat hexagon drain plug for Suzumar inflatable boats from 2003 onwards.

Oar pin for Suzumar inflatable boats manufactured since 2006.

• DS-270 RIB
• DS-310 RIB
• DS-320
• DS-390
• DS-420

• DS-230
• DS-260 / DS-320
• DS-360 / DS-390
• DS-270 RIB / DS-310 RIB

Cone-shaped bottom plug for the Suzumar 270 inflatable boat.

Tool for tightening Halkey Roberts valves.

• DS-230
• DS-265 / DS-290 / DS-320 / DS-270 RIB / DS-310 RIB

Suzumar DS230/265/290/360 oar lock

With the Suzumar pressure gauge you can optimize the pressure of your pontoons. The gauge is screwed onto the filling valve, the gauge is not attached to the pump hose.

Suzumar inflatable boat fiberglass bench

Attached to pontoons with hook fasteners.

Compatible models:

• DS270RIB
• DS310RIB
• DS310 aluminum insole
• DS350RIB