Talamex

Talamex non-toxic anti-freeze glycol protects water systems from freezing. The product is also suitable for protecting drinking water systems in boats and motorhomes. Does not damage rubber seals, aluminum or copper. The product is ready to use without dilution. Not suitable for protecting hot water heaters (always disconnect and drain).

• A = 25cm
• H = 110cm
• W = 25cm

• A = 70cm
• Height = 135cm
• W = 30cm

• A = 110cm
• H = 210cm
• W = 45cm

Durable waterproof boat cover that stays flat even in cold weather. The triple-layer material is tear-resistant and also resistant to wind. All edges are double-layered and the seams are reinforced. The strength is 250g/m2, which corresponds to the strength of a building cover.

FEATURES:

• The material is 100% polyester, of the highest quality.
• Tear-resistant, sturdy and durable
• Foldable and flat even in cold weather
• Reinforced seams
• Weatherproof, also resistant to chemicals
• Waterproof
• All seams are double-stitched.
• Triple material
• Color: white

Combined mast light and deck light with LED technology. The light has flexible mounting tabs for mounting on the mast. Suitable for boats up to 12 meters.

Talamex RIB inflatable boat

A RIB boat offering sporty boating and excellent performance. Made of dark grey German Valmex® Mehler PVC, the best quality available. Heat-welded seams for a long service life. The aluminium frame is strong, stable and lightweight. The S-Line model has a bow locker and a double bottom hull with a flat floor finished with luxurious EVA foam.

Features

• 0.9 mm German Valmex® Mehler PVC
• 2.5 mm thick double bottom aluminum frame with flat floor
• Heat-welded seams
• EVA foamed floor
• Bravo pressure relief valve
• Stainless steel towing eyes and hard plastic bow handle
• Number markings around the valves
• Bow compartment with fuel tank strap and space for a 24 liter fuel tank

Equipment

• Double-acting hand pump
• Fuel tank strap
• Repair kit (without glue)
• Bravo telescopic aluminum oars

The LED navigation light package manufactured by Nautilight provides stunning navigation lights on both sides of the boat

Nautilight navigation lights with black housing. The package includes two side lights – one for the left side of the boat (red) and one for the right side (green).
The navigation lights feature powerful LED bulbs that make them visible up to 2 nautical miles away. This makes them approved for boats up to 20 meters long, despite their compact size.

Meets the following requirements:
USCG COLREG 1972 (IMO)
ABYC A-16:2016

• IMO COLREG 72 standard
• Meets USCG requirements (United States Coast Guard)
• Meets ABYC A-16 requirements ( American Boat and Yacht Council )
• NMMA type approved (National Marine Manufacturers Association)

The LED navigation light set manufactured by Talamex has great lights on both sides of the boat

A set of traffic lights with a modern design. Includes both red and green lights. White housings and mounting gaskets are supplied with the lights.

Admitted:

• IMO COLREG 72 standard
• Meets USCG requirements (United States Coast Guard)
• Meets ABYC A-16 requirements ( American Boat and Yacht Council )
• NMMA type approved (National Marine Manufacturers Association)

• IMO COLREG 72 standard
• Meets USCG requirements (United States Coast Guard)
• Meets ABYC A-16 requirements ( American Boat and Yacht Council )
• NMMA type approved (National Marine Manufacturers Association)

Talamex's red LED light is stylish and suitable for boats under 12m

Durable LED side light with polycarbonate shell and stainless steel cover plate. Suitable for boats under 12m. Unlike the picture, the light has a replaceable LED bulb.

• IMO COLREG 72 standard
• Meets USCG (United States Coast Guard) requirements
• Meets ABYC A-16 requirements ( American Boat and Yacht Council )
• NMMA type approved (National Marine Manufacturers Association)

Inflatable boat patch kit. Includes two 25x15cm PVC pieces (black + light grey). Also includes a valve tightening tool. Glue must be purchased separately.

The package includes:

• 1 x Valve tightening tool
• 1 x Black PVC piece 25 x 15 cm
• 1 x Light grey PVC piece 25 x 15 cm

PVC or Hypalon – How do I know what material my boat is made of?

• Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
• Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.

• 62cm
• 75cm
• 90cm
• 120cm

Beautiful teak flagpole. The flagpole's knob is also made of teak. The conical flagpole base is protected by a stainless steel sleeve. Base diameter 25mm.

Available in three lengths:
75cm
90cm
125cm

The LED anchor light manufactured by Talamex is a popular 360-degree lighting option

Anchor light with LED bulb for boats under 12m. Light visibility at least 2 nautical miles (complies with USGC 2NM requirements). Quick-mount plate and rubber base, which improves the watertightness of the light.

360° visible anchor light manufactured by Talamex, approved for boats up to 12 meters long in the inner archipelago. The shell is made of UV-stabilized ABS plastic. The anchor light has stainless steel connectors, nitrile seals and a quick release. 1 bulb included.

Adapter for inflatable boat pumps that fits Halkey Roberts and Bravo valves. Compatible with Talamex and Quicksilver inflatable boat pumps, as well as most other similar pumps.

Inflatable boat patch kit. Includes two 25x15cm PVC pieces (dark blue + light gray). Also includes a valve tightening tool. Glue must be purchased separately.

Package contents:

• 1 x Valve tightening tool
• 1 x Dark blue PVC piece 25 x 15 cm
• 1 x Light grey PVC piece 25 x 15 cm

PVC or Hypalon – How do I know what material my boat is made of?

• Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
• Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.