Tohatsu

Tohatsu oil filter suitable for 9.9-140 hp four-stroke engines as listed below.

Always replace the oil filter when changing the oil and follow the recommendations for your engine.

The original filter number is 3BJ-07615-0 and it fits these Tohatsu models:
MFS9,9-15-20C/D
MFS9,9-15-20E
MFS25-30B
MFS25-30C
MFS25-30D
MFS40-50A
MFS60A
MFS75-140A

Oil plug seal for Tohatsu gearboxes, sold in a pack of two, normally needed when changing the gearbox oil.

Always replace the oil plug gasket when changing the transmission oil to prevent water from entering.

This is an original part with OEM number 332-60006-1 and fits the following Tohatsu 4-stroke engines:
MFS2.5B, MFS2.5C, MFS3.5B, MFS3.5C
MFS4C, MFS4D, MFS5C, MFS5D, MFS6C, MFS6D, MFS5 LPG, MFS6BZ
MFS8A3, MFS8B, MFS9.8A3, MFS9.8B; MFS9.8BX
MFS9.9C, MFS9.9D, MFS15C, MFS15D, MFS20C, MFS20D
MFS9.9E, MFS15E, MFS20E
MFS25B, MFS30B
MFS25C, MFS30C
MFS25D, MFS30D
MFS40A, MFS50A, MFS60A
MFS75A, MFS90A, MFS100A, MFS115A, MFS140A

Oil plug seal for Tohatsu engine oil.

Always replace the oil plug gasket when changing the engine oil to prevent leaks.

This is an original part with OEM number 3R3-07406-0 and fits the following Tohatsu 4-stroke engines:
MFS8A3, MFS8B, MFS9.8A3, MFS9.8B
MFS9.9C, MFS9.9D, MFS15C, MFS15D, MFS20C, MFS20D
MFS9.9E, MFS15E, MFS20E
MFS25B, MFS30B
MFS25C, MFS30C
MFS25D, MFS30D
MFS40A, MFS50A, MFS60A
MFS75A, MFS90A, MFS100A, MFS115A, MFS140A

Oil plug seal for Tohatsu engine oil.

Always replace the oil plug gasket when changing the engine oil to prevent leaks.

This is an original part with OEM number 3H6-07406-0 and fits the following Tohatsu 4-stroke engines:
MFS2.5B, MFS2.5C, MFS3.5B, MFS3.5C
MFS4C, MFS4D, MFS5C, MFS5D, MFS6C, MFS6D

Tohatsu fuel filter that fits 25-30 hp four-stroke engines according to the list below.

Replace the fuel filter according to your engine's recommendations; a clogged fuel filter can lead to engine failure.
OEM number: 3B7-02234-0

Fits the following Tohatsu models:
MFS25-30D

Genuine Tohatsu protective anode, which is installed on the engine mount or gearbox housing depending on the engine model. The anode protects the outboard motor from galvanic corrosion by corroding instead of the engine parts to be protected.

The condition of protective anodes should be checked regularly and they should be replaced in good time. As a general rule of thumb, an anode should be replaced when approximately half of its material has corroded.

Compatibility

1 anode is required for the following engines:

• Tohatsu MFS4C
• Tohatsu MFS4D
• Tohatsu MFS5C
• Tohatsu MFS5D
• Tohatsu MFS6C
• Tohatsu MFS6D
• Tohatsu MFS5C-LPG
• Tohatsu MFS5D-LPG

2 anodes are required for the following engines:

• Tohatsu MFS8A3
• Tohatsu MFS8B
• Tohatsu MFS9.8A3
• Tohatsu MFS9.8B
• Tohatsu MFS9.9C
• Tohatsu MFS9.9D
• Tohatsu MFS9.9E
• Tohatsu MFS15C
• Tohatsu MFS15D
• Tohatsu MFS15E
• Tohatsu MFS20C
• Tohatsu MFS20D
• Tohatsu MFS20E
• Tohatsu MFS40A
• Tohatsu MFS50A

Specifications

• Product type protective anode
• Installation location: engine mount or gearbox housing depending on engine model
• Original Tohatsu spare part
• OEM number 3H6-60218-0

Genuine Tohatsu sacrificial anode that protects the outboard motor from galvanic corrosion. On smaller engines the anode is located in the engine block, while on larger engines the installation location may vary depending on the engine model.

The protective anode is made of a baser metal than the engine parts, so it corrodes instead of the parts it is protecting. It is a good idea to check the condition of the anodes regularly and replace them when about half of the material has corroded.

Compatibility

1 anode required:

• Tohatsu MFS9.9E
• Tohatsu MFS15E
• Tohatsu MFS20E

2 anodes are needed:

• Tohatsu MFS25C
• Tohatsu MFS30C

3 anodes are needed:

• Tohatsu MFS40A
• Tohatsu MFS50A
• Tohatsu MFS60A

10 anodes are needed:

• Tohatsu MFS75A
• Tohatsu MFS90A
• Tohatsu MFS100A
• Tohatsu MFS115A
• Tohatsu MFS140A

Specifications

• Product type protective anode
• Original Tohatsu spare part
• OEM number 3P0-60218-0

Tohatsu service kit for MFS9.9E-20E four-stroke engines

Tohatsu's maintenance kit contains all the necessary parts for regular maintenance of your outboard motor. The kit is designed to ensure proper engine operation, long service life and reliable operation according to the manufacturer's recommendations.

Benefits and uses

By replacing parts of the maintenance kit on time, you reduce the risk of:

• For malfunctions

• Cooling problems

• For corrosion damage

At the same time, engine performance remains optimal.

Product information

The service kit with OEM number 3RS-87500-1 contains the following parts:

• 1 pc engine block anode 3P0-60218-0

• 1 pc gearbox anode 3KY-60218-0

• 1 pc oil filter 3BJ-07615-0

• 1 pc impeller 3LD-65021-0

• 1 pc impeller cup 3RS-65011-0

• 1 pc impeller wedge 3RS-65022-1

• 1 pc impeller plate 3RS-65025-0

• 1 pc impeller plate seal 3RS-65029-0

• 2 pcs transmission oil plug seal 332-60006-1

• 1 pc engine oil plug gasket 3R3-07406-0

• 1 pc propeller pin 951503-0322

• 2 pcs spark plug DCPR6E 9701-1-1103

Compatibility

Designed for the following Tohatsu engines:

• MFS9.9E

• MFS15E

• MFS20E

Tohatsu service kit for MFS40-60A four-stroke engines

Tohatsu's maintenance kit contains all the necessary parts for regular maintenance of your outboard motor. The kit is designed to ensure proper engine operation, long service life and reliable operation according to the manufacturer's recommendations.

Benefits and uses

By replacing parts of the maintenance kit on time, you reduce the risk of:

• Malfunctions

• Cooling problems

• Corrosion damage

At the same time, engine performance remains optimal.

Product information

The service kit with OEM number 3KY-87500-0 contains the following parts:

• 2 pcs gasket for transmission oil filler plug 332-60006-0

• 1 pc impeller 3C8-65021-2

• 1 pc impeller wedge 332-65022-0

• 1 pc impeller cup 3R65011-0

• 1 pc impeller cup seal 3T5-65011-0

• 1 pc impeller guide plate 3C8-65025-0

• 1 pc guide plate seal 3C8-65029-2

• 1 pc. fixed anode 3B7-60218-1

• 2 pcs anode for gearbox 3KY-60218-0

• 3 pcs block anode 3P0-60218-0

• 3 pcs O-ring for block anode 3T5-10046-0

• 1 pc thermostat seal 3KY-01032-0

• 1 pc oil filter 3BJ-07615-0

• 1 pc oil plug seal 3R3-07406-0

• 1 pc cotter pin 951503-0325

• 3 pcs spark plug IKR6G8 9701-1-1121

Compatibility

Designed for the following Tohatsu engines:

• MFS40A

• MFS50A

• MFS60A

Oil plug seal for Tohatsu engine oil.

Always replace the oil plug gasket when changing the engine oil to prevent leaks.

This is a genuine part with OEM number HZE2-90601-000 and fits the following Tohatsu 4-stroke engines:
BFT200A, BFT250A

Tohatsu's maintenance kit contains all the necessary parts for regular maintenance of your outboard motor. The kit is designed to ensure proper engine operation, long service life and maintained reliability according to the manufacturer's recommendations.

By replacing these components at the right time, you reduce the risk of malfunctions, cooling problems and corrosion damage while maintaining engine performance.

This service kit has the original part number 3V1-87500-0 and includes:

• 2 drain plug gaskets (OEM 332-60006-0)
• 1 fuel filter (OEM 369-02230-0)
  
• 1 block anode (OEM 369-60218-1)
• 1 pc impeller cup (OEM 3B2-65011-0)
  
• 1 pc impeller seal (OEM 3B2-65018-2)
  
• 1 pc impeller (OEM 3B2-65021-1)
  
• 1 pc impeller key (OEM 3B2-65022-0)
  
• 1 pc impeller plate (OEM 3B2-65025-0)
• 1 seal for impeller plate (OEM 3B2-65029-2)
  
• 1 piece thermostat gasket (OEM 3R3-01144-0)
  
• 1 gasket for engine drain plug (OEM 3R3-07406-0)
  
• 1 pc trim plate (OEM 3V1-60217-0)
  
• 2 spring pins (OEM 951403-0310)
  
• 1 scissor pin (OEM 951503-0318)

2 spark plugs (NGK DCPR6E / OEM 9701-1-1103)

Tohatsu has designed a maintenance kit specifically for the following engines:
MFS8A3, MFS8B
MFS9.8A3, MFS9.8B

Genuine Tohatsu trim tab that also functions as a protective anode for Tohatsu MFS40A, MFS50A and MFS60A outboard motors. The protective anode helps protect the engine's metal parts from galvanic corrosion.

The protective anode is made of a baser metal than the engine parts, so it corrodes instead of the parts it is protecting. It is a good idea to check the condition of the anode regularly and replace it when about half of its material has corroded.

Compatibility

• Tohatsu MFS40A
• Tohatsu MFS50A
• Tohatsu MFS60A

Specifications

• Product type trim tab and protective anode
• Original Tohatsu spare part
• OEM number 3KZ-60217-0

Tohatsu fuel filter (low pressure) suitable for 4-20 hp four-stroke engines as listed below.

Replace the fuel filter according to your engine's recommendations; a clogged fuel filter can lead to engine failure.
OEM number: 369-02230-1

Fits the following Tohatsu models:
MFS4-5-6C/D
MFS8-9,8A3/B
MFS9,9-15-20C/D

Tohatsu timing belt for 8-9.8 hp four-stroke engines

Tohatsu's original timing belt, suitable for 4-stroke outboard motors in the power class 8-9.8 hp according to the model list below.

Maintenance and use

The timing belt should be replaced according to the engine maintenance instructions. A broken timing belt can cause the engine to stall during operation and lead to serious engine damage.

Compatibility

The timing belt is an original OEM part with the number 3V1-10045-0 and fits the following engines:

• MFS8A3

• MFS9.8A3

• MFS8B

• MFS9.8B

Tohatsu service kit for MFS25D-30D four-stroke engines

Tohatsu's maintenance kit contains all the necessary parts for regular maintenance of your outboard motor. The kit is designed to ensure proper engine operation, long service life and reliable operation according to the manufacturer's recommendations.

Benefits and uses

By replacing parts of the maintenance kit on time, you reduce the risk of:

• For malfunctions

• Cooling problems

• For corrosion damage

At the same time, engine performance remains optimal.

Product information

The service kit with OEM number 3VS-87500-1 contains the following parts:

• 2 pcs transmission oil seal 332-60006-1

• 1 pc impeller wedge 332-65022-0

• 1 pc impeller 3NV-65021-0

• 1 pc impeller plate gasket

• 1 pc impeller cup

• 1 pc impeller cup seal

• 1 pc impeller plate

• 1 pc oil filter 3BJ-07615-0

• 1 pc trim anode 3C8-60217-1

• 2 pcs block anode 3P0-60218-0

• 2 pcs O-ring for anodes 3T5-10046-0

• 1 pc oil plug seal 3R3-0746-0

• 1 pc. cutting pin 951403-0312

• 1 pc propeller pin 951503-0322

• 3 pcs spark plug DCPR6E

Compatibility

Designed for the following Tohatsu engines:

• MFS25D

• MFS30D

The original Tohatsu service kit contains essential spare parts for regular outboard maintenance. The service kit is designed for Tohatsu MFS9.9, MFS15 and MFS20 C and D series outboard motors.

Regular inspection and replacement of wearing parts helps maintain reliable engine operation, cooling and performance, and prevents corrosion damage.

Service kit contents

• 2 transmission oil drain plug seals, OEM 332-60006-0
• 1 impeller, OEM 334-65021-0
• 1 impeller housing, OEM 350-65011-1
• 1 impeller key, OEM 350-65022-0
• 1 impeller washer, OEM 350-65025-0
• 1 impeller washer seal, OEM 3FS-01144-0
• 1 engine block sacrificial anode, OEM 369-60218-1
• 1 trim level protective anode, OEM 3V1-60217-0
• 1 oil filter, OEM 3BJ-07615-0
• 1 engine oil drain plug seal, OEM 3R3-07406-0
• 1 propeller shaft cotter pin
• 2 spark plugs, NGK DCPR6E, OEM 13972-10

Compatibility

• Tohatsu MFS9.9C
• Tohatsu MFS9.9D
• Tohatsu MFS15C
• Tohatsu MFS15D
• Tohatsu MFS20C
• Tohatsu MFS20D

Specifications

• Product type maintenance kit
• Original Tohatsu maintenance kit
• OEM number 3SA-87500-1

Genuine Tohatsu sacrificial anode that is installed in the gear case of compatible outboard motors. The anode protects the engine from galvanic corrosion by corroding instead of the engine parts to be protected.

It is advisable to check the condition of the protective anode regularly and replace it in good time. As a general rule of thumb, the anode should be replaced when about half of its material has corroded.

Compatibility

• Tohatsu MFS9.9E
• Tohatsu MFS15E
• Tohatsu MFS20E
• Tohatsu MFS40A
• Tohatsu MFS50A
• Tohatsu MFS60A
• Tohatsu MFS75A
• Tohatsu MFS90A
• Tohatsu MFS100A
• Tohatsu MFS115A
• Tohatsu MFS140A

Specifications

• Product type protective anode
• Installation location gearbox housing
• Original Tohatsu spare part
• OEM number 3KY-60218-0

Genuine Tohatsu protective anode that protects your outboard motor from galvanic corrosion. The anode is made of a base metal that corrodes instead of the engine parts, helping to protect the engine from corrosion caused by water.

It is a good idea to check the condition of protective anodes regularly. As a general rule of thumb, an anode should be replaced when approximately half of its material has corroded.

Compatibility

For the motor mount:

• Tohatsu MFS25B
• Tohatsu MFS25C
• Tohatsu MFS25D
• Tohatsu MFS30B
• Tohatsu MFS30C
• Tohatsu MFS30D

For the engine block:

• Tohatsu MFS40A
• Tohatsu MFS50A
• Tohatsu MFS60A

Genuine Tohatsu water pump repair kit for 25-40 hp two-stroke outboards. The kit contains the parts needed to rebuild the water pump, including a new impeller.

The impeller is an important part of the engine cooling system and will wear out with use. Over time, the material of the impeller can also harden or become brittle. A worn impeller or leaking water pump can impair the circulation of the cooling water and cause the engine to overheat.

It is recommended to check the condition of the water pump and impeller regularly and perform maintenance according to the engine maintenance schedule.

Compatibility

• Tohatsu M25
• Tohatsu M30
• Tohatsu M25H
• Tohatsu M30H
• Tohatsu MX25
• Tohatsu MX25H
• Tohatsu MX30
• Tohatsu MX30H
• Tohatsu M40C

Specifications

• Product type water pump repair kit
• Includes impeller
• Suitable for 25–40 hp two-stroke Tohatsu outboards
• Original Tohatsu spare part
• OEM number 361-87322-0

Tohatsu timing belt for 9.9-20 hp four-stroke engines

Tohatsu's original timing belt, suitable for 4-stroke outboard motors in the power class 9.9-20 hp according to the model list below.

Maintenance and use

The timing belt should be replaced according to the engine maintenance instructions. A broken timing belt can cause the engine to stall during operation and lead to serious engine damage.

Compatibility

The timing belt is an original OEM part with the number 3H8-10061-0 and fits the following engines:

• MFS9.9C

• MFS15C

• MFS20C

• MFS9.9D

• MFS15D

• MFS20D