Zipwake
Zipwake group products
The Zipwake PRO series trim controls operate up to five times faster than previous models, delivering a significant improvement in performance and control accuracy. The faster movement allows the system to respond more quickly to changing conditions – whether it’s wind, waves or load fluctuations. Zipwake PRO maintains precise control of the boat when you need it most.
Active Pitch continuously and quickly adjusts the boat's trim angle to a user-defined angle. The system works automatically in both headwind and tailwind, in crosswinds and with varying loads, keeping the boat in the optimal cruising position at all times. The end result is better acceleration, clearer visibility, more stable cruising, a more enjoyable driving experience and lower fuel consumption.
Compact and slim design with 30mm blade travel. Designed for boats up to 50 feet, especially where transom space is limited.
The integration module allows the system to be fully controlled via compatible multifunction displays. A neat installation and a clear dashboard view are easy to achieve. The system can be monitored on a variety of chartplotters via NMEA 2000® connectivity. The integration module is compatible with all Zipwake components.
- Model: KBI450-S PRO CHINESE
- Length: 450mm / 450mm
- Weight: 2.9 kg (6.4 lbs) / 2.9 kg (6.4 lbs)
- Maximum speed: 60 knots
- Blade travel: 30 mm (1.2 inches)
- Blade speed: 100 mm/s (4 inches/s)
- Cable length: 3 m (10 ft), extendable to 6 m
- Operating voltage: 36 V DC
- Power consumption: 35 W maximum
- Operating temperature: 0° – +40°C (+32° – +104°F)
- Storage temperature: -40° – +90°C (-40° – +194°F)
- Water resistance: IP68 (at a depth of 5 m)
- Compliance: CE, FCC
The Integration Kit Box includes:
- 2 x Trim plates (Chine Port side and Chine STBD side) – Includes 3 meter cables and cable protectors
- 1 x Distribution Unit – Includes 4 meter power cable
- 1 x 7 meter standard cable included
- 1 x Integration Module (Integrator Module)
Guides:
- User manual
- Warranty card
- Installation guide
- Drilling bases
- Mounting screws
- Control panel quick guide
- Deployment checklist
• Dynamic pitch and roll control
• Steering enhancement
• Built-in GPS and motion sensors
• Unique and intuitive 3D controls
• Sunlight readable color display
• Instant state user feedback
• Auto power on/off via ignition key sense
• Full range of electrical interfaces
• NMEA 2000
• Waterproof
• Auto dimming / night mode
• Upgradable via USB stick
• Up to four control panels in the system
• Surface or flush mount
• Manages installation configurations from 1 up to 6 interceptors
Model: CP-S
Display: 2.4’’ Transflective color TFT, 320 x 240 pixels, double-sided, anti-reflection coated window
Internal sensors: 5 Hz GPS, 3D Gyro, 3D Accelerometer, Ambient light
Supply Voltage: 12 - 32 V DC
Power Consumption: 10 W max
Operating Temperature: -20° to +85°C (-4° to +185°F)
Storage Temperature: -40° to +90°C (-40° to +194°F)
Waterproof Rating: IP67 / IP64 (front / back)
Compass Safe distance: 0.5 m (1.7 ft)
Compliance: CE, FCC
Weight: 0.22 kg (0.49 lbs)
Mounting: Flush or surface
The panel’s two unique control wheels provide easy, quick and intuitive manual control of running trim, heel or heading. However, the system normally operates in automatic control mode, which is enabled by a single press on the AUTO button. In this mode, the built-in high-frequency GPS, 3D gyro sensors and robust motion controller automatically ensure dynamic elimination of un- comfortable and dangerous boat pitch and roll.
The system provides continuous feedback of boat speed, pitch and roll angle, as well as the interceptors ? positions, on a 2.4” sunlight-readable color display.
The Zipwake PRO series trim controls operate up to five times faster than previous models, delivering a significant improvement in performance and control accuracy. The faster movement allows the system to respond more quickly to changing conditions – whether it’s wind, waves or load fluctuations. Zipwake PRO maintains precise control of the boat when you need it most.
Active Pitch continuously and quickly adjusts the boat's trim angle to a user-defined angle. The system works automatically in both headwind and tailwind, in crosswinds and with varying loads, keeping the boat in the optimal cruising position at all times. The end result is better acceleration, clearer visibility, more stable cruising, a more enjoyable driving experience and lower fuel consumption.
Compact and slim design with 30mm blade travel. Designed for boats up to 50 feet, especially where transom space is limited. Chine trim tabs utilize the outer hull surfaces to provide effective lift. Their effect is equivalent to that of a straight trim tab mounted one size larger inboard. Chine trim tabs are mounted on the transom at the very edge of the hull.
- Length: 450 mm (18 inches) / 450 mm (18 inches)
- Weight: 2.9 kg (6.4 lbs) / 2.9 kg (6.4 lbs)
- Maximum speed: 60 knots
- Blade travel: 30 mm
- Blade speed: 100 mm/s
- Cable length: 3 m, extendable to 6 meters
- Operating voltage: 36 V DC
- Power consumption: 35 W maximum
- Operating temperature: 0° – +40°C
- Storage temperature: -40° – +90°C
- Water resistance: IP68 (at a depth of 5 m)
- Compliance: CE, FCC
Standard Kit Box includes:
- 2 x Trim tabs (Chine Port side and Chine STBD side) – Includes 3 meter cables and cable protectors
- 1 x Distribution Unit – Includes 4 meter power cable
- 1 x Control Panel – Includes 7m standard cable
- 1 x 5 meter extension cable (Extension Cable)
Guides:
- User manual
- Warranty card
- Installation guide
- Drilling bases
- Mounting screws
- Control panel quick guide
- Deployment checklist
The Zipwake Mini Controller combines the ease of use of a sleek control panel with the ability to adjust your boat’s trim without a touchscreen. This small and discreet controller complements a Zipwake system equipped with an Integrator module and touchscreen multifunction displays (MFDs). It acts as a “hands free” remote control for the Zipwake app, allowing you to optimize your boat’s trim without using a touchscreen.
User-friendly and intuitive control dials allow for automatic operation or manual adjustments. The Mini Controller has built-in GPS, so an external GPS source is not required to operate the system. It is fully waterproof and can be surface or flush mounted anywhere on your boat. In addition, the Mini Controller’s “Key Sense” can be connected to the engine ignition for automatic power on.
Key details of the Mini Controller:
- User-friendly and intuitive adjustment rollers
- Waterproof construction
- Built-in GPS
- Automatic power on/off
- Surface or recessed installation
- Up to 3 Mini Controllers in the system
- Indicator lights: RGB LEDs
- Voltage: 12 – 32 V DC
- Power consumption: Max. 2 W
- Operating temperature: -20°C – +80°C
- Storage temperature: -40°C – +90°C
- Waterproof rating: IP67
- Compass safety distance: 0.5 m
- Approvals: CE, FCC
