Anchor Winch Accessories
Accessories and spare parts for anchor winches.Tuoteryhmät
Anchor Winch Accessories -ryhmän tuotteet

JUNE DEAL
Quick anchor winch Autostop. Attached to the transom with a stainless steel plate.
The stop ensures that the anchor stops in the correct position. The sensor detects when the red ball attached to the anchor line approaches and stops the retraction. The autostop fits Balder series X models (where the reel is located on the left side of the engine). The ball is included in the delivery.
If space is limited or the transom is curved, the autostop can be used without the stainless plate. A round version is also available, item number 38314.
Dimensions:
- Length: 195mm
- Width: 146mm
- Thickness: 4mm
The stop ensures that the anchor stops in the correct position. The sensor detects when the red ball attached to the anchor line approaches and stops the retraction. The autostop fits Balder series X models (where the reel is located on the left side of the engine). The ball is included in the delivery.
If space is limited or the transom is curved, the autostop can be used without the stainless plate. A round version is also available, item number 38314.
Dimensions:
- Length: 195mm
- Width: 146mm
- Thickness: 4mm
• Autostop disc
• For Quick Balder X models
• Original part
• For Quick Balder X models
• Original part

JUNE DEAL
Quick anchor winch Autostop. Attached to the transom with a stainless steel plate.
This system ensures that the anchor stops in the correct position. The sensor detects when the red ball attached to the anchor line approaches and stops the retraction. The autostop fits Balder series Y models (where the spool is located on the left side of the engine). The ball is included in the delivery.
If space is limited or the transom is curved, the autostop can be used without the stainless plate. A round version is also available, item number 38314.
Dimensions: Length: 195mm
Width: 146mm
Thickness: 4mm.
This system ensures that the anchor stops in the correct position. The sensor detects when the red ball attached to the anchor line approaches and stops the retraction. The autostop fits Balder series Y models (where the spool is located on the left side of the engine). The ball is included in the delivery.
If space is limited or the transom is curved, the autostop can be used without the stainless plate. A round version is also available, item number 38314.
Dimensions: Length: 195mm
Width: 146mm
Thickness: 4mm.
• Autostop disc
• For Quick Balder Y models
• Original part
• For Quick Balder Y models
• Original part

JUNE DEAL
Quick Autostop round model.
The Autostop system ensures that the anchor remains in the correct position. The sensor detects when the red ball attached to the anchor rope is near and stops the anchor from being raised. Fits Balder series anchor winches, both X and Y models. The ball is included in the delivery.
The Autostop system ensures that the anchor remains in the correct position. The sensor detects when the red ball attached to the anchor rope is near and stops the anchor from being raised. Fits Balder series anchor winches, both X and Y models. The ball is included in the delivery.
• Autostop disc
• Quick Balder for X and Y models
• Original part
• Quick Balder for X and Y models
• Original part

JUNE DEAL
Removable solenoid for anchor winch.

JUNE DEAL
Removable solenoid for anchor winch.

• FastFit™ enable the motor / gearbox to be rotated and fixed in increments of 45°
• To install your windlass, simply fix the deck unit to the deck and then slide the gearbox up the shaft, swing the FastFit™ clamp shut and tighten up the bronze nut.
• To install your windlass, simply fix the deck unit to the deck and then slide the gearbox up the shaft, swing the FastFit™ clamp shut and tighten up the bronze nut.
• FastFit™ enable the motor / gearbox to be rotated and fixed in increments of 45°
• To install your windlass, simply fix the deck unit to the deck and then slide the gearbox up the shaft, swing the FastFit™ clamp shut and tighten up the bronze nut.
• To install your windlass, simply fix the deck unit to the deck and then slide the gearbox up the shaft, swing the FastFit™ clamp shut and tighten up the bronze nut.

Lewmar V2 Deck Unit Gipsy/Drum. Maximum boat size approx. 45', motor 700 W/12 V, 900 W 12 V maximum lifting capacity 650-760 kg, lifting speed 14 m/min, maximum speed under load 21m/min, chain 8/10 mm DIN 766, rope 12-16 mm, can be combined with chains.
Lewmar V2 Deck Unit Gipsy/Drum. For boats under 45', motor 700 W/12 V, 900 W 12 V lifting power max. 650-760 kg, lifting speed 14 m/min, under load max. speed 21m/min, chain 8/10 mm DIN 766, line 12-16 mm, can be attached to a chain.

Kampanja
Outlet
Mouting Kit for V2/V3 windlasses.

Kampanja
Outlet
110A.
Circuit Breaker 110A.

Made of high-quality steel and calibrated for Lofran sprockets, hot-dip galvanized, 50 meters of chain per bundle (DIN 766), weight 2.20 kg/m.
Price/meter.
Price/meter.
Manufactured from high quality steel and calibrated for Lofran chain wheels. Heat galvanized, One bundle has 50 meters of chain. (DIN 766), weight 2,20 kg/m.












