Antifreezes and preservatives

Bio-Protect is used for effective control of existing diesel bacteria or for preventive purposes to avoid the growth of bacteria, mold and algae in tanks and fuel systems. Sufficient for 500 liters. Bottle 100 ml

Bio-Protect is used for effective control of existing diesel bacteria or for preventive purposes to prevent the growth of bacteria, mold and algae in tanks and fuel systems. Sufficient for 1250 liters. Bottle 250 ml

Gasket with ethylene glycol corrosion inhibitor. Also suitable for engines with aluminum blocks.

Mixing ratios:
1 part glycol + 1 part water: approximately -36 ºC
1 part glycol + 1.5 parts water: approx. -25 ºC
1 part glycol + 2 parts water: approximately -18 ºC

Weight: 22 kg

Ethylene glycol with corrosion protection. Also suitable for aluminum engines.

K-Glycol mixing ratios:
1 part K-Glycol + 1 part water approx. -36°C
1 part K-Glycol + 1.5 parts water approx. -25°C
1 part K-Glycol + 2 parts water approx. -18°C

Rust protection and preservative for the cooling system.

Instructions:
Run fresh water through the engine cooling system.
Mix coolant protectant with water in a ratio of 1:10.
Important: The engine must reach a temperature that will allow the thermostat to open to protect the entire cooling system.
Note: The fluid should be drained when there is a risk of freezing.

Prevents freezing and ice formation in toilets, water tanks, pipes, drains and water traps. Antifrost Natur also has lubricating properties for example in the use of pumps, valves and seals. Excellent for boats, summer cottages, caravans and motor homes. The product is a concentrate and is mixed with water to the desired antifreeze concentration. Pour Antifrost Natur into the water system until you have filled the pipes or tanks that may freeze. Flush the system through to protect water traps, pipes and taps. Biodegradable. Does not harm metals, plastic or rubber.

This patented product features a unique membrane that promotes moisture entry into the tank but prevents it from escaping. This allows harmful moisture to be removed and prevents water that has been absorbed into the tank from escaping.

SaniDry Tray is suitable for rooms up to 30 m3 and SaniDry Tray Grande up to 60 m3 for approximately three months. Recommendations may vary depending on temperature and humidity.

The SaniDry Dehumidifier absorbs moisture from the air efficiently, safely and cleanly. It also minimizes the risks of direct contact and accidental water leakage. (It is not a problem if the product falls over, as moisture penetrates the membrane from the outside to the inside, but the absorbed moisture can no longer escape.)

The product starts absorbing moisture as soon as it is taken out of the packaging. It is ready to use immediately, without the waiting time usually required when using this type of product.

Removes excess moisture in many different applications: for example, excess moisture caused by rain or snow or brought in by a dog in a car, caravan, boat, home, garage, basement, summer cottage, house foundations or when camping.

SaniDry also reduces the growth of mold and prevents musty odors. It effectively prevents mold growth in refrigerators on boats or caravans, for example. The product also removes unpleasant musty odors very effectively.

The dry ball effectively absorbs excessive moisture and condensation, which cause mold damage and bad odors. Removing moisture and condensation also reduces the energy needed for heating in a holiday home. Used in holiday homes, caravans, boats, garages, basements, bathrooms, laundry and storage rooms or similar moisture-sensitive rooms. One refill bag is enough for 1-3 months depending on the amount of moisture and temperature and is suitable for a space of approximately 12-14m2. Avoid direct contact with metal. Rinse with lukewarm water if necessary. When the mesh bag is empty and the jar is full of liquid, the container is emptied into the drain. Add the contents of the separately purchased refill bag and the dry ball is ready for use again.

How to use

Torrbollen Original consists of three plastic parts and one dehumidifier bag. Assemble the product as follows: first place the flat lid part on the bottom part, and on top of it the dehumidifier bag, which has been removed from the plastic. Then place the perforated top part in place.

The bag absorbs moisture from the air, and the collected liquid drains into the bottom of the Torrbollen. The liquid should only be poured out when the container starts to fill up. The liquid is environmentally friendly and can be poured into the drain.

IN THE PACKAGE:

• 1 x dry ball
• 1 x refill pack
• Refills can be purchased separately

For spaces over 20m3, e.g. summer cottages. Works for 2 - 5 months/filling. The dry ball holds 3 filling bags.

Torrbollen Mega Dry Ball is designed to reduce humidity levels in enclosed spaces with little or no ventilation. Torrbollen effectively removes excess moisture and reduces the formation of mold and unpleasant odors. Mold can often cause allergy symptoms. It is ideal for use in winter storage of boats and caravans. It can also be used in holiday homes, basements, cellars, bathrooms, storage rooms, garages, storerooms, stables, changing rooms or similar moisture-sensitive rooms.

How long does Torrbollen's effect last?
It depends entirely on how humid the space is. Generally speaking, one refill bag will last 1-3 months in a 12-14 m² space.

How does Torrbollen work when the temperature drops below zero?
Torrbollen always works down to zero degrees, but when there is no moisture in the air, it stops working. The liquid in the jar does not freeze.

What to do if liquid spills on the floor or carpet, for example?
Dry and wash with warm water. Repeat if necessary.

Where do you pour the liquid when changing the filling bag?
Pour the liquid into the drain. This does not pose an environmental risk. Avoid contact of the liquid with metal as there is a risk of rust formation if it is not rinsed.

Why does a non-woven bag sometimes harden?
When the flakes in the non-woven bag are saturated with water and the moisture in the space runs out, they harden and dry together, making the bag hard. When the moisture returns, the process starts again, albeit with a slightly reduced efficiency, as the surface area of ??the flakes has decreased.

• 1 pc 450g refill pack
• 3 pcs 450g refill pack
• 4 pcs 450g refill pack

Torrbollen dehumidifier refill pack. Contains 4 refill bags. Torrbollen dehumidifier is ideal for boats, motorhomes, stables and many other locations.

A concentrated propylene glycol that provides excellent protection against freezing and corrosion in marine engines. It is a low-toxicity and environmentally friendly option that is readily biodegradable – an excellent choice for those who want to protect both their engine and the environment. The product is particularly suitable for engines with aluminum blocks.

Effective protection

Contains additives that protect against frost, corrosion and overheating and ensure long-lasting performance.

Environmentally friendly

Propylene glycol has a low environmental impact and is readily biodegradable.

Compatible with aluminum

An excellent choice for engines with an aluminum block – provides effective corrosion protection.

Recommended mixing ratio and protection levels

For best protection, a mixture of 50% glycol and 50% water is recommended. This provides protection down to approximately -37°C. Alternative mixtures:

• 30% glycol: protects down to -14°C

• 40% glycol: protects up to -25°C

• 50% glycol: protects up to -37°C

Applications

This glycol product is suitable for all liquid-cooled internal combustion engines and provides long-lasting protection against freezing and rust. Thanks to OAT (Organic Acid Technology), it ensures corrosion protection for all metal components, including aluminum.

Specifications

• Type: Concentrated Propylene Glycol

• Capacity: 1 liter

• Free from: nitrates, amines, phosphates and silicates

Propylene glycol sealant that provides excellent antifreeze and corrosion protection for engines. It is a low toxicity, environmentally friendly alternative that is readily biodegradable, making it an excellent choice for protecting both the engine and the environment. The product is especially suitable for engines with aluminum blocks.

Effective protection:
Contains additives that protect against frost, corrosion and overheating, ensuring long-term performance.

Environmentally friendly:
Propylene glycol has a low environmental impact and is readily biodegradable.

Compatible with aluminum:
An excellent choice for aluminum block engines, providing effective corrosion protection.

Recommended mixing and protection levels:
50% glycol and 50% water: protects down to approximately -37°C.
30% glycol: protects down to approximately -14°C.
40% glycol: protects down to approximately -25°C.

Areas of use:
This glycol mixture is ideal for all liquid-cooled internal combustion engines and provides long-term protection against frost and rust. OAT technology (Organic Acid Technology) ensures corrosion protection for all metal components, including aluminum.

Type: Concentrated propylene

Size: 25 liters

Does not contain: Nitrates, amines, phosphates or silicates

A concentrated propylene glycol that provides excellent protection against freezing and corrosion in marine engines. It is a low-toxicity, environmentally friendly option that is readily biodegradable — an excellent choice for those who want to protect both their engine and the environment. The product is particularly suitable for engines with aluminum blocks.

Effective protection

Contains additives that protect against frost, corrosion and overheating, ensuring long-lasting performance.

Environmentally friendly

Propylene glycol has a low environmental impact and is readily biodegradable.

Compatible with aluminum

Excellent for engines with aluminum blocks — provides effective corrosion protection.

Recommended mixing ratio and protection levels

For best protection, a mixture of 50% glycol and 50% water is recommended. This provides protection down to approximately -37°C. Alternative mixtures:

• 30% glycol: protects down to -14°C

• 40% glycol: protects up to -25°C

• 50% glycol: protects up to -37°C

Applications

This glycol product is suitable for all liquid-cooled internal combustion engines and provides long-term protection against freezing and rust. Thanks to OAT (Organic Acid Technology), it protects all metal components, including aluminum.

Specifications

• Type: Concentrated Propylene Glycol

• Capacity: 4 liters

• Free from: nitrates, amines, phosphates and silicates

Fuel stabilizer Quickare NR1

Quicksilver's original Quickare Fuel Treatment NR1 fuel stabilizer, recommended by Mercury and MerCruiser. This green bottle is Step 1 in Quicksilver's line of fuel treatment products and is intended to be used as an additive with every fuel fill .

Benefits

• Prevents corrosion

• Removes deposits and cleans the fuel system

• Improves engine performance

• Stabilizes gasoline

• Suitable for all petrol engines

• Original OEM quality

Usage and compatibility

• Suitable for all gasoline grades

• Protects rubber parts from the harmful effects of modern ethanol-containing gasoline

• Prevents the formation of moisture and corrosion

• Gentle on carburetors, injectors, fuel lines, tanks, spark plugs and valves

• Does not affect catalytic converters

• Suitable for both 2-stroke and 4-stroke engines regardless of the injection system

Dosage

• One bottle is enough for up to 454 liters of gasoline

• The exact dosage is indicated on the bottle label.

Product information

• Volume: 355 ml

Quickleen Engine & Fuel System Cleaner from Quicksilver is the original fuel additive. This is a yellow bottle and is Step 2 in the Quicksilver fuel additive series. It is intended to be used regularly during the boating season, providing the following benefits:

• Quick and easy carbon deposit removal
• Deep cleaning of engine internals
• Prevents twitching and other problems
• Extends the life of spark plugs
• Suitable for all petrol engines
• Original quality
• Suitable for all grades of petrol (including ethanol blends). Effectively cleans and dissolves deposits in carburettors, injectors, valves, spark plugs, piston rings and cylinder heads. Does not affect catalytic converters and works in both 2-stroke and 4-stroke engines, regardless of the injection system. One bottle is enough for 227 litres of petrol, and you can see how much you should pour on the bottle label. 355 ml.

Quickstor Fuel Stabilizer from Quicksilver is the original fuel stabilizer recommended by Mercury/Mercruiser. This is a red bottle and is Step 3 in the Quicksilver fuel additive series. It is intended to be used prior to fuel storage, providing the following benefits:

• Prevents fuel decomposition
• Prevents oxidation of both fuel and fuel system
• Keeps fuel usable for up to 1 year
• Prevents the formation of dirt and deposits
• Lubricates injectors/carburetor
• Suitable for all grades of petrol and various ethanol blends. Does not affect catalytic converters and works in both 2-stroke and 4-stroke engines regardless of the injection system. One bottle is enough for 227 liters of petrol, and you can see how much you should pour on the bottle label. Run the engine for 5-10 minutes after mixing to allow the additive to spread throughout the fuel system. 355 ml.

Red Line diesel additives lubricate pumps and injectors. They clean the fuel system. They reduce exhaust fumes. They improve engine performance. They reduce wear in the fuel system.

Red Line diesel additives provide lubrication to the fuel while effectively cleaning the entire fuel and combustion system. This results in the engine running better and delivering more power. The improved lubricating properties of the fuel reduce wear on diesel pumps and injectors. Today's diesels are "rougher, drier" than in the past. In addition, fuel and engine oil form deposits. This generally results in poorer engine performance, increased fuel consumption and worse exhaust emissions.

Red Line SI-1 additive prevents sparking of glow plugs. It cleans the carburetor and injector. It prevents rust in the fuel system. It stabilizes the fuel during long-term storage. The current quality of gasoline, together with engine oil, forms deposits in the fuel system, which can manifest as starting difficulties, uneven running and increased fuel consumption.

Red Line gasoline additive is unique because it effectively removes deposits and lubricates the fuel system, but also because it stabilizes gasoline during long-term storage (such as off-season storage). SI-1 can be used in both 2-stroke and 4-stroke engines.