Allows the propeller pilot to be installed horizontally when the boat's propeller pilot is at a different height than the control unit.
Autopilot accessories
Marinekauppa offers high-quality accessories for boat autopilots, such as controls, extension surfaces, and rudder angle sensors.Tuoteryhmät
Autopilot accessories -ryhmän tuotteet
Kampanja
The built-in, intuitive keypad can be combined with the Triton2 instrument display to create a fully featured autopilot controller.
- Autopilot control unit
- Networkable, NMEA2000
- Compatible with B&G and Simrad
Kampanja
Fits all Raymarine autopilots, and as an accessory for models without rudder angle sensors.
- Raymarine rudder angle sensor
- Manufacturer's part number M81105
The Raymarine mounting tube is used to attach the fixed end of the sterndrive autopilot to a vertical (bulkhead) surface, such as a cockpit sidewall.
- Length 220mm
Raymarine pinnapilot pin, 1pc
- Surface pilot pin
Kampanja
DS21-P provides a watertight cable entry and is made of impact-resistant plastic for 9-14 mm cables. Cable protection for connectors up to Ø21 mm.
- Width 90mm
- Weight 0.105 kg
- Length 30mm
- Height 210 mm
Kampanja
DS21-P provides a watertight cable entry and is made of impact-resistant plastic for 4-9 mm cables. Cable protection for connectors up to Ø21 mm.
- Weight 0.105 kg
- Width 90 mm
- Height 210 mm
- Length 30mm
Kampanja
DS21-P provides a watertight cable entry and is made of impact-resistant plastic for 9-14 mm cables. Cable protection for connectors up to Ø30 mm.
- Length 30mm
- Width 90 mm
- Weight: 0.15 kg
- Height 210 mm
Kampanja
Outlet
- AP 70 Sunscreen
- White
- Plastic
Kampanja
Autopilot control unit 4.1"
- Display 4.1"
- On-screen buttons and a rotating scroll wheel
- Low glass screen
- Low power consumption
Kampanja
- Extension piece for extension surface
- 120mm
Kampanja
Allows the propeller pilot to be installed horizontally when the boat's propeller pilot is at a different height than the control unit.
Allows the propeller pilot to be installed horizontally when the boat's propeller pilot is at a different height than the control unit.
Kampanja
Allows the propeller pilot to be installed horizontally when the boat's propeller pilot is at a different height than the control unit.
- Surface mount
- 90mm
- Available in different lengths 30,60,90 and 120mm
Kampanja
Simrad RF25N, Rudder angle sensor with transmission link and 5m NMEA2000 Micro-C cable
The Simrad RF25N Rudder Angle Sensor is a sensor that is connected to the rudder via a mechanical linkage and reports the actual rudder position to your autopilot computer. The Simrad Continuum steering algorithm helps to ensure that your boat is steered as accurately as possible. These sensors are typically used on boats with inboard engines, larger vessels and in special applications where virtual rudder position sensing is not the best option. The RF25N included in this package connects directly to your boat's NMEA2000 network, simplifying the cabling required for installation.
Product package contents:
- RF25N rudder angle sensor
- 5m NMEA2000 cable with Micro-C connector
- Weight 0.5kg
- Compass safety distance 0.5m
- Supply voltage 12-16V
- Maximum current consumption 40mA
- Operating temperature range -25°C - +55°C
- Dimensions 99 (H) x 65 (W) x 177 (D) mm
- Waterproof rating IPX6
- Warranty 2 years
Product package contents:
- RF25N rudder angle sensor
- 5m NMEA2000 cable with Micro-C connector
Kampanja
TP32/22 PLUG, SOCKET & MOUTNING PIN
- Bracket for autopilot
- To the control surface
- 102mm (4")
Kampanja
ACU-100 Evolution Autopilot Control Unit, the ACU-100 (Control Unit) is the central component of the Evolution autopilot systems. The ACU-100 contains the main power and drive electronics that connect to your vessel's steering system, as well as a 12 volt DC power supply. Create a complete Evolution autopilot system by combining the ACU-100, EV-1 steering transducer, and a compatible autopilot work unit.
- Autopilot control unit
- Spare strap for helm pilot system
- Compatible with gray Raymarine / Autohelm helm unit
- Not suitable for older black MK1 work unit
JUNE DEAL
HRC is a multi-function controller that can be used to control several electrical devices on a boat, such as anchor winches, ladders, cranes, etc.
- Multifunction controller
- Works with multiple electronic devices on the boat
- Maximum cable length 4.2m
- Watertight cover connections
Kampanja
The ACU-200 (Control Unit) is the core component of the Evolution autopilot systems. The ACU-200 contains the main power and drive electronics and a 12 volt DC power supply that connects to your vessel's steering system. Create a complete autopilot system by combining the EV-1 transducer, autopilot control unit, and a Type 1 hydraulic, mechanical linear, or mechanical rotary actuator.
- Autopilot control unit
- Type 1 for hydraulic, mechanical linear and rotary working units
