Boat paints and care products - All offers!

The core of the board is made of durable eucalyptus and has a turned mahogany surface. The natural properties of the material make the board less susceptible to warping due to humidity and temperature fluctuations. The eucalyptus core helps reduce the risk of distortion and maintains the strength of the board over time. The board is glued with waterproof WBP glue (Weather and Boil Proof), which makes it resistant to humidity and water, while increasing its service life. Mahogany plywood is ideal for construction and furniture manufacturing, such as shelves, cabinets and other similar structures where durable constructions are required.

Hempel Infinity is a revolutionary refinish for the Silic One system. Infinity is a water-based refinish for Hempel's Silic One. Infinity extends the performance of the silicone into the next sailing season, reducing labour, paint use and costs while providing greater savings and more time on the water.

• Less costs
• Less work
• Less painting

How to renew Silic One surface with Hempel Infinity:

• Mix the Infinity product thoroughly and pour into the paint tray.
• Apply Infinty with a roller over the entire painted surface. The direction of application is not important.
• Let dry for at least 24 hours.
• Rinse off with fresh water, and you're ready for the next boating season.

A practical set of microfibre cloths for daily cleaning and wiping of small surfaces. The soft microfibre effectively removes dirt, dust and water without scratching or leaving streaks. The cloths are suitable for use on gelcoat surfaces, glass, plastic, paint and stainless steel. Suitable for both dry and wet cleaning in the vehicle, car or at home.

* Gentle on sensitive surfaces
* Effective for wiping and polishing
* Can be used with or without detergent
* Washable and reusable
* Supplied in packs of 10

Microfiber cloth 70x90cm is an extra large cleaning cloth, suitable for effective wiping and polishing of larger surfaces. The soft microfiber cloth removes dirt, dust and water without leaving streaks or scratches. The cloth is suitable for use on gelcoat surfaces, glass, paint, plastic and stainless steel. Suitable for both dry and wet cleaning and general cleaning.

* Large size for quick cleaning of large panels
* Gentle on sensitive surfaces
* Effective in wiping and drying
* Can be used with or without detergent
* Washable and reusable

Gelcoat Filler

Gelcoat Filler is a putty intended for repairing surface damage to gelcoat layers. The product is suitable for repairing small damages, scratches and dents and enables a smooth and unnoticeable finish on gelcoat surfaces.

Package contents

• 100ml putty in a metal jar

• Hardener

• Mixing cup

• Stirring stick

Applications

• Surface damage to gelcoat surfaces

• Small dents and scratches on boats and other gelcoat surfaces

Instructions

Preparation

• Carefully chamfer the edges of the damage.

• Clean the repair area thoroughly with, for example, acetone.

Finish

• Apply the mixed putty to the damaged area and let it harden.

• Sand with wet sandpaper grits 600, 800 and 1200

• Finish the surface with rubbing, polish and wax

Gelcoat Filler is an easy-to-use and effective solution for clean and durable repairs to gelcoat surfaces.

Polishing machine 1100W 230V – 3M

The 3M Polisher has a powerful 1100W motor and variable speed for better control and efficient work. The machine has a spindle lock for quick and easy pad changes, improving work efficiency.

The polisher offers high performance, durability and excellent polishing results in combination with 3M abrasive and polishing pads. The excellent power-to-weight ratio improves comfort and performance. The specially designed gearbox delivers exceptional torque even with large polishing discs.

Thanks to the speed control, you can choose just the right speed to achieve the best possible surface quality.

• Compatible with all 3M accessories and polishes

• Softgrip areas ensure optimal control and comfort

• Designed to rest upside down to prevent the polishing pad from getting dirty

Specifications:

• Thread: M14

• Motor power: 1100 W

• Speed: 700–1850 rpm (adjustable)

• Tool diameter: 200 mm

• Voltage: 230V

• Cable length: 3.2 m

• Weight: 1.9 kg

Note: Backing plate/washer and sheep wool head are not included in the package .
The use of 3M polishing pads requires a quick-release adapter , product no. 9116.

Powerful and easy-to-use polishing machine – 600W, dual action

A powerful and user-friendly polisher that is perfect for restoring the shine of your boat's gelcoat. Thanks to the 600W motor and dual action with a 9mm eccentric track, you can achieve a smooth and fast surface without the risk of burning damage - ideal for beginners and professionals alike.

The machine has a soft start function and an adjustable speed range of 1500-6800 rpm, making it easy to adapt to different surfaces and application needs. The included D-handle can be adjusted for a more ergonomic fit for longer work periods.

The package includes:

• 1 pc D-handle
• 1 piece polishing wheel Ø150 mm
• 1 pc polishing sponge Ø150 mm
• 1 pc Allen key
• 1 pc wrench

Specifications:

• Power: 600W
• Voltage: 230V ~ 50Hz
• Speed: 1500–6800/min (no load)
• Eccentric movement: 9 mm
• Maximum disc size: 150 mm
• Soft start: Yes
• Wire: 2×0.75 mm²

Powerful rotary polisher – 1200W

Powerful rotary polisher with 1200 W motor, ideal for gelcoat restoration and maintenance on large surfaces. With a 180 mm polishing disc and infinitely variable speed control (1200–4800 rpm), you can effectively and precisely treat oxidized and worn surfaces.

The rotary motion provides a powerful sanding action on deeper scratches and heavy oxidation – the perfect first step before fine polishing. Other features include a soft start that provides control right from the start and reduces the risk of splashes.

The ergonomic design with side handle allows for stable and comfortable use even during longer work sessions. Delivered ready to use with an accessory pack.

Package contents:

1 pc side handle

1 piece polishing wheel Ø180 mm

1 piece sheepskin hood

1 pc Allen key

2 pcs screws

Specifications:

Power: 1200W

Voltage: 230V ~ 50Hz

Speed: 1200–4800/min (no load)

Disc diameter: 180 mm

Spindle: M14

Center hole: 22 mm

Cable: 3 m, 2×0.75 mm², VDE plug

Soft start: Yes

ABNET Proflash is a fast-acting cleaner suitable for all surfaces that can be washed with water. Its unique formula effectively removes all types of dirt, while protecting the surface being treated. The product is suitable for hard surfaces, textiles and leather without damaging the material.

Cleans all surfaces that can be washed with water – ABNET Proflash effectively breaks down and removes dirt, regardless of its type or surface.
Removes stains from textiles – Suitable for all textile and leather surfaces without fading or staining. Ideal for boat covers, sofas, carpets and awnings.
Works as a degreaser – Combines the power of alkaline and cold degreasing, making it also suitable for cleaning vehicles and workshops.
Restores surfaces to their original condition – Renews and refreshes surfaces and textiles, giving them a clean and well-groomed appearance.
Eliminates bad odors – Neutralizes unpleasant odors, such as the smell of sewage, tobacco, or old furniture.
Non-toxic and biodegradable – Made from environmentally friendly ingredients, completely safe for both the user and nature.

HARMFUL

Causes serious eye irritation.

Have the container or label available in case you need to seek medical attention.

Keep out of reach of children.

Wash thoroughly after use.

Wear protective gloves/protective clothing/eye protection/face protection.

IF IN EYES: Rinse cautiously with water for several minutes.

Remove any contact lenses, if present and easy to do.

Continue rinsing.

If eye irritation persists: Get medical attention.

Ingredients list:

Sodium hydroxide

Teak plywood with a turned mahogany core and teak veneer. The excellent quality makes it suitable for surfaces that require a durable and finished material. The board is glued with waterproof WBP glue (Weather and Boil Proof), which makes it very resistant to moisture and water and extends its service life. The core of the board is made of durable mahogany, and its surface is made of fine teak veneer. The natural properties of the material make the board resistant to moisture and temperature fluctuations. This high-quality board can be used for visible structures and surfaces where the best possible finish is desired.

• Length: 1200mm
• Width: 600mm
• Thickness: 6mm

High-quality traditional oil-based varnish with excellent UV protection. Golden yellow deep gloss that retains its beauty and shine for a long time. Self-smoothing and easy to apply. Contains UV protection, does not yellow. Very easy to apply.

Vinyl cleaner is formulated to remove tough dirt, greasy marks and slime.

Applications include car, RV and boat upholstery, interior/exterior moldings, rain gear and outdoor cushions and canopies. The powerful formula is tough on dirt, but is not harmful to vinyl. The vinyl cleaner does not contain acids or corrosive substances. Suitable for vinyl, plastic, rubber and leather.

DIRECTIONS FOR USE: Spray the cleaner onto the surface to be cleaned. Spread the cleaner evenly by rubbing with a cloth, soft brush or sponge in a circular motion. Allow the cleaner to work on the surface for 15-30 seconds before wiping or rinsing. Stubborn stains may require a second cleaning, soaking for about a minute and gently scrubbing, then rinsing or wiping.

NOTE: Test sensitive surfaces (leather, decals, waterline tape, painted areas) and areas where product may drip on a small, inconspicuous area before use. Do not use if any adverse effects occur. Star brite will not be liable for any damages up to the purchase price of this product.

Zipper lubricant. Suitable for both metal and plastic zippers. Prevents rust and sticking, and removes and protects against salt water.

Star brite Teak Cleaner is safe, easy to use and acid-free. Cleans teak and other wood surfaces, removing dirt, stains and weathering. The first step (Step 1) in restoring grey and dirty teak. Cleans wood for oiling and sealer

INSTRUCTIONS FOR USE FOR BADLY WEATHER-DAMAGED (GRAY OR BLACK) TEAK:

• Apply Star brite Premium Teak Cleaner directly to dry wood.
• Apply the product with a cleaning brush or Star brite Medium scrubbing pad. Leave the product on the surface for about 1-2 minutes,
  then rub along the grain of the wood to ensure a deep clean.
• Rinse thoroughly with clean water. For damaged surfaces, use a scrubbing sponge to remove dirt.

INSTRUCTIONS FOR USE FOR LIGHTLY DIRTY TEAK.

• For lightly soiled teak: Wet the wood with clean water. Apply the product with a brush or scrub pad. Rub gently to remove dirt. Rinse thoroughly with clean water. After treating the entire area, apply Star brite Premium Teak Brightener to brighten and restore the natural color of the wood.

CAUTION: Immediately rinse off any spills or drops from areas you do not want treated. Avoid contact with fabrics.

Sikaflex-290 DC PRO has been developed for wood and teak decks that need to be completely waterproof and weatherproof. This very easy to use, one-component polyurethane sealant with excellent UV resistance can be sanded down to the deck surface after curing, giving a clean and beautiful finish.

For professional use only.

USE:
Sikaflex®-290 DC PRO has been specially developed for sealing wooden decks on boats and ships. The product is resistant to fresh and seawater. The product is used in combination with Sika® Primer-290 DC.

BENEFITS/FEATURES:
Sandable

• Excellent weather resistance
• Suitable for varying operating conditions
• For business use only
• IMO approved

Teak Sealer Snappy Sealer

Give your teak a freshly sanded finish. Snappy Sealer gives your teak a beautiful golden color that not only protects the teak, but lasts throughout the boating season.

Snappy Sealer is more than just a simple teak oil; it contains advanced polymers based on the finest teak oil. The polymers form a protective layer against dirt and other contaminants that otherwise easily mix with the oils over time. This means that a teak deck treated with Snappy Sealer will retain its beautiful finish and will not darken over time, as pure oils often do. Snappy Sealer contains UV protection, which not only prevents the sealer from breaking down, but also protects the teak from the harmful effects of UV radiation.

Snappy Sealer is easy to use; first treat with Snappy Teak-Nu, then apply Snappy Sealer with a sponge in the direction of the wood grain. Only one coat is needed. The sealer contains pigments that give your teak a warm golden color. Prevents the wood from graying and weathering Treated once a year Protects the wood from stains UV protection Easy to apply

Give your teak a new shine. Snappy Sealer gives your teak a beautiful golden color that not only protects the teak, but also lasts throughout the boating season.

Snappy Sealer is more than just teak oil; it contains advanced polymers based on the finest teak oil. The polymers form a protective layer against dirt and other contaminants that would otherwise mix with the oils over time. This ensures that a teak deck treated with Snappy Sealer will retain its beautiful finish and will not darken over time as pure oils do. Snappy Sealer contains a UV protector that not only prevents the preservative from breaking down, but also protects the teak from the harmful effects of UV radiation.

Snappy Sealer is easy to use; first treat with Snappy Teak-Nu, then apply Snappy Sealer with a sponge in the direction of the wood grain. Only one coat is required. The sealer contains pigments that give your teak a warm golden color.

A very effective cleaner for teak. Teak-Nu restores an aged teak deck to new condition. The teak deck will look new without sanding or refinishing. With proper care, a teak deck will never need to be replaced.

Restoring and protecting the deck with the Teak-Nu set is a two-step process.