Boat stands

A sturdy boat stand for motorboats with a maximum weight of 2000kg, which you can bolt to long beams or the floor. The wooden side supports automatically adjust to the bottom of the boat.

NOTE! ONLY DELIVERY AS A HOME PACKAGE OR PICK UP FROM THE STORE.

Vertical boat support made of hot-dip galvanized steel. Adjustable height 60-90cm. Quick height adjustment with trapezoidal thread and wing nut. Large, rectangular rubber-coated frame support made of painted marine plywood. The support adapts to the bottom of the boat, but if you have a boat with a deep V-bottom you can use two vertical motorboat support legs at the stern and two tilted sailboat support legs at the bow. The supports are stackable to minimize storage space.

• The recommendation is two supports per 8-10 feet of length.
• The weight and support of the boat should be on the keel strip
• Always use chains between supports

Number of supports: recommendation according to boat length below

• >30 feet 4 pcs
  
• 30-45 feet 6 pieces
• 45< feet 8 pieces or more

Vertical boat support made of hot-dip galvanized steel. Adjustable height 75-105cm. Quick height adjustment with trapezoidal thread and wing nut. Large, rectangular rubber-coated frame support made of painted marine plywood. The support adapts to the bottom of the boat, but if you have a boat with a deep V-bottom you can use two vertical motorboat support legs at the stern and two tilted sailboat support legs at the bow. The supports are stackable to minimize storage space.

• The recommendation is two supports per 8-10 feet of length.
• The weight and support of the boat should be on the keel strip
• Always use chains between supports

Number of supports: recommendation according to boat length below

• >30 feet 4 pcs
  
• 30-45 feet 6 pieces
• 45< feet 8 pieces or more

Vertical boat support made of hot-dip galvanized steel. Adjustable height 90-120cm. Quick height adjustment with trapezoidal thread and wing nut. Large, rectangular rubber-coated frame support made of painted marine plywood. The support adapts to the bottom of the boat, but if you have a boat with a deep V-bottom you can use two vertical motorboat support legs at the stern and two tilted sailboat support legs at the bow. The supports are stackable to minimize storage space.

• The recommendation is two supports per 8-10 feet of length.
• The weight and support of the boat should be on the keel strip
• Always use chains between supports

Number of supports: recommendation according to boat length below

• >30 feet 4 pcs
  
• 30-45 feet 6 pieces
• 45< feet 8 pieces or more

Tilted sailboat support. Adjustable height 190-235cm. Foldable. Powder coated steel. Flexible, rubber-coated ball base. Chains should always be used between the support legs.

Choosing the right support leg height: usually the easiest way to choose the right support is to calculate the boat draft + keel support height -25cm. Another good way is to choose the support according to the boat draft, then the draft should be in the middle of the support's adjustment range. So if the draft is 180cm, a 170-215 high support leg could be a good choice. Tyresöstötta's support legs have 45cm of adjustment range, leaving 15cm of the pipe end inside the support.

Number of supports: recommendation according to boat length below

• >25 feet 4 pcs
  
• 25-30 feet 6 pieces
• 30-40 feet 6-8 pieces
• 40-55 feet 8-10 pieces or more

Tilted sailboat support. Adjustable height 110-155cm. Foldable. Galvanized steel. Flexible, rubber-coated ball base. Chains should always be used between the support legs.

Choosing the right support leg height: usually the easiest way to choose the right support is to calculate the boat draft + keel support height -25cm. Another good way is to choose the support according to the boat draft, then the draft should be in the middle of the support's adjustment range. So if the draft is 180cm, a 170-215 high support leg could be a good choice. Tyresöstötta's support legs have 45cm of adjustment range, leaving 15cm of the pipe end inside the support.

Number of supports: recommendation according to boat length below

• >25 feet 4 pcs
  
• 25-30 feet 6 pieces
• 30-40 feet 6-8 pieces
• 40-55 feet 8-10 pieces or more

Tilted sailboat support. Adjustable height 130-175cm. Foldable. Galvanized steel. Flexible, rubber-coated ball base. Chains should always be used between the support legs.

Choosing the right support leg height: usually the easiest way to choose the right support is to calculate the boat draft + keel support height -25cm. Another good way is to choose the support according to the boat draft, then the draft should be in the middle of the support's adjustment range. So if the draft is 180cm, a 170-215 high support leg could be a good choice. Tyresöstötta's support legs have 45cm of adjustment range, leaving 15cm of the pipe end inside the support.

Number of supports: recommendation according to boat length below

• >25 feet 4 pcs
  
• 25-30 feet 6 pieces
• 30-40 feet 6-8 pieces
• 40-55 feet 8-10 pieces or more

Tilted sailboat support. Adjustable height 150-195cm. Foldable. Galvanized steel. Flexible, rubber-coated ball base. Chains should always be used between the support legs.

Choosing the right support leg height: usually the easiest way to choose the right support is to calculate the boat draft + keel support height -25cm. Another good way is to choose the support according to the boat draft, then the draft should be in the middle of the support's adjustment range. So if the draft is 180cm, a 170-215 high support leg could be a good choice. Tyresöstötta's support legs have 45cm of adjustment range, leaving 15cm of the pipe end inside the support.

Number of supports: recommendation according to boat length below

• >25 feet 4 pcs
  
• 25-30 feet 6 pieces
• 30-40 feet 6-8 pieces
• 40-55 feet 8-10 pieces or more

Tilted sailboat support. Adjustable height 170-215cm. Foldable. Galvanized steel. Flexible, rubber-coated ball base. Chains should always be used between the support legs.

Choosing the right support leg height: usually the easiest way to choose the right support is to calculate the boat draft + keel support height -25cm. Another good way is to choose the support according to the boat draft, then the draft should be in the middle of the support's adjustment range. So if the draft is 180cm, a 170-215 high support leg could be a good choice. Tyresöstötta's support legs have 45cm of adjustment range, leaving 15cm of the pipe end inside the support.

Number of supports: recommendation according to boat length below

• >25 feet 4 pcs
  
• 25-30 feet 6 pieces
• 30-40 feet 6-8 pieces
• 40-55 feet 8-10 pieces or more

3m chain for the support legs. The support legs of the Tyresöstötta have a slot where the chain can be attached.

Frame protector for Tyresöbocken 1550kg boat stand. Size 16x16cm.

Frame protector for Tyresöbocken Type 1 boat stands and sailboats. Size: 21x21cm.

Very durable Tyresöbocken boat stand with steel beam. Side supports made of powder-coated steel with telescopic legs and articulated frame plates for fine adjustment. The maximum weight of one stand is 1500kg, which means that the maximum weight of the boat can be up to 3000kg with a 50/50 weight distribution.

Maximum boat weight:

• With a 30/70% weight distribution, the maximum weight is 2000kg.
• With a 50/50% weight distribution, the maximum weight is 3000kg

Very durable Tyresöbocken boat stand with steel beam. Powder-coated steel, and the side supports have telescopic legs and articulated frame plates for fine adjustment. In addition, a center support for a larger load. The maximum weight of one stand is 5000kg, which means that the maximum weight of the boat can be a maximum of 10000kg with a 50/50 weight distribution.

Maximum boat weight:

• With a 30/70% weight distribution, the maximum weight is 7000kg.
• With a 50/50% weight distribution, the maximum weight is 10,000kg.

Very durable Tyresöbocken boat stand with steel beam. Powder-coated steel, and the side supports have telescopic legs and articulated frame plates for fine adjustment. In addition, a center support for a larger load. The maximum weight of one stand is 5000kg, which means that the maximum weight of the boat can be a maximum of 10000kg with a 50/50 weight distribution.

Maximum boat weight:

• With a 30/70% weight distribution, the maximum weight is 7000kg.
• With a 50/50% weight distribution, the maximum weight is 10,000kg.

Galvanized square profile 25x60mm. Equipped with a keel roller and two adjustable side supports with rollers. Can be installed permanently using 2x4 inch planks (not included). Suitable for use on the beach, on your own ramp and other similar sites.

For trailer winch. Polyester webbing with attached forged hook. Breaking strength: 2029kg

"Hot-dip galvanized steel top plate with stainless bolt and nut for motorboat supports. Covered with a hull protector made of EPDM rubber. Due to its narrow design, the top plate fits better against the hull compared to a traditional square top plate.

Suitable for MBS supports, but also for other similar support models on the market.

It is recommended to replace it if, for example, your old wooden top plate is broken.

Dimensions: 310x160 mm.

"Hot-dip galvanized steel top plate with stainless bolt and nut for sailboat and motorboat supports. Upholstered with hull protection made of EPDM rubber.

Suitable for MBS and SBS supports, but also for other similar support models on the market.

It is recommended to replace it if, for example, your old wooden top plate is broken.

Dimensions: 255x255 mm.