Caravan Heaters

Air nozzle for tight installations

The air nozzle is designed for installations where traditional round air vents cannot fit. It is ideal for applications such as under windows and other confined spaces where efficient defrosting and air control are required.

The air nozzle has a 60 mm connection that can be connected directly to the Air 2D heater. With the Air 4D heater, it is recommended to use a Y branch to connect two air nozzles, or combine a standard ventilation valve and air nozzle for optimal air distribution and prevention of overheating.

Features

• Suitable for tight installations where a round valve cannot fit
• Efficient air distribution and defrosting
• Direct connection to Air 2D heater
• Compatible with Air 4D system via Y branch
• Supplied as a complete set, including screws, installation template and instructions

T-piece with 90° elbow for connecting Ø 60 mm heating hoses. Perfect for dividing the air flow in two directions in smaller heating systems. The compact design makes it easy to install even in tight spaces and the structure provides a safe and tight connection to standard hoses.

T-piece with 90° branch for connecting Ø 75 mm heating hoses. Used to divide the air flow between two ducts in a heating system and is suitable for most installations on boats, motorhomes or other vehicles equipped with air heaters. Made of durable PA6 plastic that withstands heat and vibration in demanding conditions.

T-piece with 90° branch for connecting heating hoses with a diameter of 90 mm. Used to divide the air flow in two directions in the heating system and allows flexible installation in boats, motorhomes or other vehicles with air heaters. Perfectly fits Autoterm Air 4D and other systems with a hose diameter of 90 mm.

Heat pipe that protects your boat from frost and condensation

• Energy efficient
• Stepless thermostat 0-90 °C
• Thermal cut-out (overheating protection)
• Operates on 230V power
• Can be installed on the floor or wall
• Installation accessories included
• Specifications:
• CE approved
• IP44 rating

Diesel heater Autoterm 9D Pro 12V – an efficient solution for heating large spaces

The Autoterm Air 9D Pro 12V Comfort Panel is the most powerful diesel heater in the Air series. It is ideal for heating large spaces, such as trunks, buses, large motorhomes, special vehicles, boats and yachts.

The heater draws air from either outside or a well-ventilated space, heats it quickly and provides comfortable warmth even in very cold conditions. The durable steel frame and double-spiral heat exchanger make the device durable and efficient.

The maximum output is 8kW, and the heater can produce up to 413m³ of warm air per hour. This helps to maintain a constant temperature even in severe frosts.

The heater is easy to install or retrofit in a wide range of vehicles and boats. A full installation kit is included. The model is available in both 12V and 24V versions.

Despite its high power, the heater is fuel efficient, consuming only 0.42–1.00l/h depending on the power.

All heaters in the Autoterm Air series have brushless induction motors, which ensure quiet operation, long service life and reliable operation even in temperatures as low as -45°C.

The included Comfort Panel control panel makes operation easy and also allows remote control with an iOS or Android device (remote module must be purchased separately).

Features of the Comfort Panel control panel:

• Easy-to-use interface

• LED status display

• Thermostat function

• Additional heating options

• Quick start button

• Vehicle battery protection function

• Maintenance reminder

• Accurate internal digital temperature sensor

The AT0012 exhaust adapter with an outer diameter of 38mm is also included in the package. The adapter is made of durable 316 stainless steel, making it an excellent choice for demanding and abrasive conditions.

This heater is an excellent choice when you need an efficient and reliable heating solution for large spaces.

Specifications 12V (high/low mode):

• Heating power: 8kW / 3.2kW

• Amount of heated air: 413m³/h / 70m³/h

• Power consumption: 210W (24V)

• Fuel: Diesel – EN590

• Fuel consumption: 1.0l/h / 0.42l/h

• Fusing unit weight: 12.8kg

• Total weight: 18kg

• The product dimensions are 650x212x281mm

Rubber fitting for ventilation hoses.

• Diameter: 70mm
• Length: 100mm
• Installation: 6x M4 screws

Air hose set for Webasto EVO 40 and EVO 55.
The package includes:

• 6m 90mm hose
• 6m 60mm hose
• 1pc exhaust muffler
• 2pcs black 90mm outlets
• 1pc black closable 60mm outlet
• 1pc white closable 60mm outlet
• 2pcs 90mm hose connectors
• 1pc reduction 90-60mm
• 2pcs 90mm lock nuts
• 2pcs 60mm lock nuts
• 3pcs hose clamps
• 1pc Y-joint 60-60-60
• 1pc Y-joint 90-90-90