Dinghie glues and patch kits
Glues and patches for repairing air leaks in inflatable boatsDinghie glues and patch kits -ryhmän tuotteet

A complete set for gluing patches on inflatable boats made of Hypalon or Neoprene.
The package includes:
- Adeprene: 125ml
- Activator: 10ml
- Emery paper
- Small brush
- Round 10cm patch made of Neoprene-Hypalon.
PVC or Hypalon – How do I know what material my boat is made of?
- Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
- Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.
- Hypalon and neoprene compatible
- 2-component
- A placeholder is also included.

Two-component adhesive for PVC inflatable boats
Special glue used for repairing rubber boats. Also used for larger repairs and in situations where durability is needed.
Instructions: Mix the glue and hardener in the correct ratio. Apply a thin layer of the mixture to both the repair patch and the boat. Wait about 10 minutes and apply a second layer to both surfaces. Wait about 10-15 minutes. Now place the patch in the desired location and press. Full strength is achieved after about 24 hours.
The package also includes a brush, a 10 cm diameter light gray repair patch, and glue.
PVC or Hypalon – How do I know what material my boat is made of?
- Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
- Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.
- 2-component
- PVC rubber boats
- 125ml + 10ml

Suitable for repairing PVC inflatable boats, resistant to seawater and hot conditions.
PVC or Hypalon – How do I know what material my boat is made of?
- Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
- Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.
- Rubber boat glue
- 250 ML
- PVC for inflatable boats

Inflatable boat patch kit. Includes two 25x15cm PVC pieces (black + light grey). Also includes a valve tightening tool. Glue must be purchased separately.
The package includes:
- 1 x Valve tightening tool
- 1 x Black PVC piece 25 x 15 cm
- 1 x Light grey PVC piece 25 x 15 cm
PVC or Hypalon – How do I know what material my boat is made of?
- Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
- Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.
- For PVC inflatable boats
- Includes two 25x15cm PVC pieces
- Also included is a valve tightening tool

Inflatable boat patch kit. Includes two 25x15cm PVC pieces (dark blue + light gray). Also includes a valve tightening tool. Glue must be purchased separately.
Package contents:
- 1 x Valve tightening tool
- 1 x Dark blue PVC piece 25 x 15 cm
- 1 x Light grey PVC piece 25 x 15 cm
PVC or Hypalon – How do I know what material my boat is made of?
- Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
- Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.
- Material: PVC
- Valve tightening tool included

Inflatable boat patch kit. Includes two 25x15cm PVC pieces (white + light grey). Also includes a valve tightening tool.
Package contents:
- 1 x Valve tightening tool
- 1 x White PVC piece 25 x 15 cm
- 1 x Light grey PVC piece 25 x 15 cm
PVC or Hypalon – How do I know what material my boat is made of?
- Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
- Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.
- Material: PVC
- Includes two 25x15cm PVC pieces
- Also included is a valve tightening tool

Polymarine PVC Glue is a strong polyurethane-based adhesive that bonds excellently to both soft and hard PVC, as well as nylon and polyurethane fabrics. It has been specially developed for inflatable boat repairs and works with materials such as Zodiac/Bombard Dynalon and Strongon and Narwhal/Valiant Hypertex . The glue is easy to use as a single-component adhesive for quick, temporary repairs. It bonds in just 10-15 minutes and cures fully in 48 hours. For larger or permanent repairs, Polymarine’s two-component adhesive is recommended.
- Polyurethane adhesive for PVC
- For quick repairs
- 70 ml tube
- Strong polyurethane adhesive for PVC and similar materials
- Suitable for repairing all PVC boats including Zodiac, Bombard, Narwhal and Valiant
- Fast and easy-to-use one-component adhesive for temporary repairs
- Contact adhesive that sets in 10–15 minutes
- Full cure within 48 hours
- For best results, use with Polymarine 2903 solvent

Polymarine's two-component PVC glue is a complete repair kit for PVC-based inflatable boats, such as RIBs, SIBs, dinghies and SUP boards. The kit includes professional-grade two-component glue, two-color reinforced PVC fabric and the necessary supplies to make a durable and beautiful repair. With primer, hardener, brush, stick and clear instructions, you are ready to repair your boat quickly and permanently. A compact and handy kit that is perfect for taking with you.
Contents:
1 × 125 ml Polymarine 3062 PVC adhesive (part A)
1 × 5 ml hardener (part B)
1 × 10 ml 2903 primer and cleaner
1 × PVC fabric reinforced, light grey (A6)
1 × PVC fabric reinforced, white (A6)
1 × brush
1 × stick
1 × pair of disposable gloves
Area of ??application: PVC inflatable inflatables (RIB, SIB, tender, SUP)
Result: Permanent and professional repair
- Complete set for PVC boats and SUP boats
- 2-component adhesive + reinforced PVC fabric
- Provides a strong and permanent fix
- Complete repair kit for PVC boats and SUP boards
- Includes two-component adhesive, primer and reinforced PVC fabric
- Professional quality for strong and durable repairs
- Easy to use thanks to the included brush and instructions
- Compact size, perfect for taking on a trip or boat trip

Polymarine's 2-component adhesive Hypalon is a complete repair kit for Hypalon-based inflatable boats, RIBs and even neoprene materials such as wetsuits. The kit includes professional 2-component adhesive, reinforced Hypalon fabric in two colors and all the necessary accessories for a durable and safe repair. With primer, hardener, sandpaper, brush and clear instructions, you can quickly and easily make a high-quality repair. A compact kit that is perfect to always have on your boat.
Contents:
1 × 125 ml Polymarine 2909 Hypalon adhesive (part A)
1 × 5 ml hardener (part B)
1 × 10 ml 2903 primer and cleaner
1 × Hypalon fabric reinforced, medium grey (A6)
1 × Hypalon fabric reinforced, white (A6)
1 × brush
1 × pipe stick
2 × sandpaper
1 × pair of disposable gloves
Use: Hypalon, RIB and neoprene
Result: Permanent and professional repair
- Complete set for Hypalon and RIB
- 2-component adhesive + reinforced Hypalon fabric
- Provides a strong and permanent fix
- Repair kit for Hypalon boats, RIB boats and neoprene
- Includes two-component adhesive, primer and reinforced Hypalon fabric
- Professional quality for strong and durable repairs
- Easy to apply with a brush, sandpaper and instructions
- A handy set, practical to take on the boat or on a trip

Fabric for PVC inflatable boats.
PVC or Hypalon – How do I know what material my boat is made of?
- Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
- Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.
- Material: PVC
- Size: 50 x 50cm
- Available in several different colors

1-component Hypalon adhesive. Suitable for bonding inflatable boats and other inflatables made of Hypalon material.
PVC or Hypalon – How do I know what material my boat is made of?
- Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
- Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.
- 1-component
- Withstands seawater and hot conditions

2-component adhesive for hypalon-made inflatable boats.
PVC or Hypalon – How do I know what material my boat is made of?
- Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
- Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.
- Hypalon glue
- 250ml
- 2-component

Quicksilver's high-quality PVC fabric is ideal for durable repairs to inflatable boats and other PVC surfaces. The 0.7 mm thick, white patch fabric is a flexible, UV-resistant material that adheres well with the right adhesive.
PVC or Hypalon – How do I know what material my boat is made of?
- Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
- Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.
- PVC fabric 0.7mm
- Color white
- Size 1x1m


