Fans
Engine compartment fans and windshield fans for boats.Fans -ryhmän tuotteet
Powerful 24V engine bay fan for ventilation of boat engine bays and other enclosed spaces. This 4 inch in-line fan produces a high airflow of 235 CFM approximately 400 m³/h while keeping power consumption and operating noise low.
The compact design and mounting feet make installation easy, both horizontally and vertically. The corrosion-resistant ABS body, five-blade fan and sealed motor shaft ensure a long service life even in demanding marine conditions.
Features
- Voltage: 24V
- Airflow 235 CFM approx. 400 m³/h
- Low power consumption
- Quiet running sound
- Compact in-line design
- Built-in mounting feet
- Can be installed horizontally or vertically
- Corrosion-resistant ABS body
- Sealed motor shaft protects against moisture
- Five-blade fan
- Suitable for marine environments
Approvals
- ISO 8846 certified for marine use
The Seaflo engine room fan 24V is a compact 3-inch inline fan developed for ventilation of engine rooms and other enclosed spaces. It produces 145 CFM (? 247 m³/h) of airflow and has very low power consumption. The fan is made of corrosion-resistant ABS material and has a sealed motor shaft, ensuring a long service life in marine environments. The five-blade fan provides efficient airflow and quiet operation, and the built-in mounting feet make it easy to install both horizontally and vertically. The fan meets ISO 8846 certification, so it can be safely used in the engine room of a boat.
- For free-standing installation
- 247 m3/hour
- 24 volts
- Connection 76mm
- 24V engine bay fan with compact 3-inch (76 mm) connection
- Flow 145 CFM (247 m³/h) with low power consumption
- Five-blade fan for efficient and quiet air circulation
- Sealed motor shaft protects against moisture and extends service life
- Corrosion-resistant ABS plastic for marine environments
- Easy to assemble thanks to built-in legs, horizontally or vertically
- Meets ISO 8846 certification
Engine compartment fan made of ABS plastic. The fan has a sealed motor and is also spark-proof. Suitable for ventilation of engine compartments, kitchens and, for example, the toilet of a boat.
Airflow: 550 m³/hour
Voltage: 12V
Outlet diameter: 102mm
Current consumption: 11A
Protection: 16A fuse (fuse not included)
Dimensions: 297 x 176mm
- Enclosed motor
- 550 m³/hour
- 12 volts
Designed specifically for boats. Suitable for ceiling or wall mounting. Equipped with a long-life computer fan motor. Very low energy consumption and noise level.
- Voltage (V): 12
- Fan type: Electric
- Airflow capacity (m³/min): 1.2
- Static pressure: 6 mm H2O
Spark-proof fan – 3m³/min
Safe and efficient fan. The spark-proof design makes it an excellent choice for spaces where special care is required. The air flow of 3m³/min ensures good ventilation.
Current consumption: 4.5A
Recommended fuse: 6A
- 3m³/min
- Virrankulutus: 4.5A
- Sulake: 6A
- 12V
ABS. Spark-proof. Motor shaft and bolts made of stainless steel.
Installation instructions:
Mounted high in the engine compartment.
Drill holes for the outlet.
Connect the 75mm hose to the fan.
The suction part of the hose must be located at the bottom of the engine compartment.
Use a power cord of appropriate strength.
- Spark-proof
- 3 Amp
- 12 volts
- 2.8 m³/min
Engine room fan made of stainless ABS plastic. Five-blade fan with low noise level. Enclosed motor. Spark-proof. Low current. Can be installed vertically and horizontally. For ventilation of engine room, galley, bilge, toilet, etc.
• Airflow: 400m3/hour
• Power: 12V
• Inlet and outlet diameter 102mm
• Power consumption: 4Amp
• Fuse 7Amp (fuse not included)
• Dimensions: 128 x 166 x 121mm
A 12 volt heater fan that works for demisting. The fan is adjustable 360 ??degrees to the right and left.
- Cable 1.5m
- Cigarette lighter connector
- Fuse 15A
- Power: 150W
- 12 volts
- Length: 130mm
- Width: 100mm
- Height: 80mm
Defroster, small, plastic. Power 4.3 kW with 80-degree water. 2 pcs 50mm air blower. Water connection 16mm. 2-speed fan. 12V. Maximum power 70W. Dimensions: L. 275mm, W. 202mm, H. 115mm. Power switch included.
• For defrosting
• Peel off the plastic
• 4.3 kW power in 80 degree water
• 2 pcs air outlet 50mm
• Water connection 16mm
• 2-stage fan
• 12V
• Maximum power consumption 70W
• Length: 275mm
• Width: 202mm
• Height: 115mm
• Includes switch
Engine compartment fan Turbo 3000.
- US Coast Guard Standard
- 12V/ 2.7A
- fuse recommendation 4 A
- Dimensions 128 x 129 x 92 mm
- Hose inner diameter 3?
- Output 4.5 m3/minute
Engine compartment fan Attwood 100mm
- Airflow: 5.7m3/minute
- Current consumption: 3.5A
- Fuse: 8A
- For 100mm hose
- Quiet
- 12V
