Flagpoles and Mounts
Flagpoles and Mounts -ryhmän tuotteet
The same model is also available with a handrail bracket, for example for pulpit or pushpit installation.
- Height 50cm
- Pipe diameter: 13mm
- Mounting base dimensions: length: 87, width: 32, height 24mm
- Nut spacing: 64mm front (2pcs) 23.5mm and (1pc) rear 91mm
- Chromium
Lengths:
- 62cm
- 75cm
- 90cm
- 120cm
- Stainless steel (AISI316)
- Polished surface
- Lengths: 62cm - 75cm - 90cm - 120cm
- Compatible foot diameter 25mm (sold separately)
Beautiful teak flagpole. The flagpole's knob is also made of teak. The conical flagpole base is protected by a stainless steel sleeve. Base diameter 25mm.
Available in three lengths:
75cm
90cm
125cm
- Teak flagpole
- Teak woodcutter
- Lengths: 75cm, 90cm, 125cm
- Flagpole base: stainless steel
- Leg diameter: 25mm
- Suitable for 20-25mm railings
- Length 500mm
- Pipe diameter 13mm
- Handrail bracket included as standard
- Compatible flag height: 40cm (+-2cm)
Stainless steel flagpole base. Flagpole diameter 19mm.
- Flagpole foot
- Flagpole diameter: 19mm
- Material: stainless steel (polished)
- Foot (base) diameter: 56mm
Nawa flag pole holder with handrail attachment. Fits 25 mm rails.
- Lengths: 40-150cm
- Made of teak
- Stainless steel sleeve
Flagpole attachment:
Hole diameter: 26mm
Depth: 49mm
Base plate
Diameter: 70mm
Mounting hole spacing (CC dimension): 43mm
Screw hole size: 6mm
- Flanged
- Polished stainless steel
- The product dimension is 25mm.
Flagpole diameter: 32mm
Base plate diameter: 76mm
Screw hole size: 6mm
- Surface-mounted
- Polished stainless steel
- For flagpole diameter 32mm
Universal holder made of stainless steel. For pipes with a diameter of 20-25mm. Supplied with plastic sleeve and pins. Flagpole connector: Inner diameter: 25mm, Depth: 46mm.
- Universal
- Stainless acid steel
- For pipes 20-25 mm
Stainless steel clip, for racing flag 9512127004.
Flagpole holder for railing 25mm. Does not include NOA railing bracket. Stainless steel.
Stylish 80cm chrome flag pole with ready-made railing attachment. Fits 20-25mm railings. The distance between the flag attachments is 60cm.
- Suitable for 20-25mm railings
- Length 800mm
- Pipe diameter 20mm
- Handrail bracket included as standard
- Compatible flag: 55x90cm
- Made of elegant teak wood
- To maintain the durable surface of teak wood, it should be cleaned with a good teak cleaner and oiled regularly with a high-quality teak oil.
- Stainless steel sleeve
- Available with 32mm (without sleeve 30mm) and 25mm foot (without sleeve 23mm)
Traditional and elegant teak flagpoles ensure long-lasting quality and classic style for your boat.
The wood's high oil content prevents it from rotting or warping, even in harsh marine environments where sun, wind and salt water put the wood to the test.
To preserve the natural beauty of teak, it is recommended to clean the product with a high-quality teak cleaner and oil it regularly with teak oil.
- Length: 1210mm
- Diameter: 32mm
- Teak
- Brass sleeve
- Will not rot or warp
- Manufacturer: ROCA
- Manufacturer's product code: 607562
Flagpole made of Thai teak, finely sawn and treated with teak oil. Diameter approx.: 25 mm. Stainless steel sleeve at the bottom and pre-drilled holes for rope at the top.
- Lengths: 40-150 cm
- Made of teak
- Stainless steel sleeve
Flagpole made of Thai teak, finely sawn and treated with teak oil. Diameter approx.: 25 mm. Stainless steel sleeve at the bottom and pre-drilled holes for rope at the top.
- Lengths: 40-150 cm
- Made of teak
- Stainless steel sleeve
Teardrop shaped flagpole base made of chrome-plated brass. Inclined structure with three recessed screw holes. Supplied with brass sleeve.
With socket: 24mm
Without socket: 25mm
Depth without socket: 44mm
Depth with socket: 52mm
Base plate:
Width: 63mm
Length: 78mm
Screw holes: 5mm
- Teardrop-shaped
- Chrome-plated brass
- Brass sleeve
Aluminum, anodized, teardrop-shaped flagpole holder. Inclined design with recessed screw holes, stop screw, aluminum tube and drain holes in the bottom. Flagpole mounting tubes: With tube: 26mm, Without tube: 30mm, Depth: 46mm, Base plate Width: 64mm, Length: 89mm, Screw holes: 5mm, Screw holes at 64mm intervals.
- Teardrop-shaped
- Made of anodized aluminum
- Drainage hole in the bottom
Brass sleeve for flagpole holder. Height: 47mm, outer dimension: 25mm, inner diameter: 24mm.
- For flagpole holder
- Outer diameter: 25 mm
- Height: 47mm
