Float switches
Tuoteryhmät
Float switches -ryhmän tuotteet
Kampanja
Includes proprietary electronic sensing technology that detects the water level and starts the bilge pump. The level switch is designed to operate reliably in all bilge water mixtures.
Equipped with fully sealed electronics that protect the switch from water and chemical damage. Directly compatible with all competitor products and has no moving parts that could bind, break or wear out over time. Suitable for pumps with a maximum current of 15A.
- No moving parts
- Max 15A
- 12 volts
Kampanja
Compact mechanical float switch for bilge pump together with compact electronics provides a reliable combination. Error start prevention (delay), mercury-free, robust impact-resistant plastic housing and encapsulated electronics ensure reliability. The switch starts when the liquid level is 50 mm and switches off when the liquid level has dropped to 20 mm. Voltage 12V. Maximum current 15 A. The switch is connected to SPX FLOW Johnson Pump Cartridge bilge pumps. When connecting to other SPX FLOW Johnson Pump bilge pumps, use the connector provided.
- Turns on at 50 mm level
- Cuts off power at 20mm level
- Voltage 12V
- Maximum current 15A
Automatic float switch made of corrosion-resistant material. For fully automatic use. Built-in microswitch. Can be used with 6, 12, 24 and 32 V voltages. Equipped with a bracket for quick connection to Johnson submersible pumps.
- Corrosion resistant
- Quick coupling for Johnson pumps
- 6-32 volts
- Length: 115mm
- Width: 75mm
- Height: maximum 95mm
Kampanja
Ultima Switch™ digital technology uses patented Mirus field effect sensor cells to generate a micro-electric field and detect a break in the field caused by water or liquid. The sensor cells are fully protected and never come into contact with water, do not oxidize and are not affected by oil or debris.
No moving parts, fully shielded solid-state electronics and field sensors, no environmentally harmful mercury or visible sensors. This eliminates the possibility of corrosion and etching, making the Ultima Switch™ an environmentally friendly product. The Ultima Switch starts when the liquid level is 50 mm and cuts off when the level has dropped to 20 mm. An eight-second delay prevents false starts. The Ultima Switch™ is suitable for 20 amp pumps with a voltage of 12V or 24V.
No moving parts, fully shielded solid-state electronics and field sensors, no environmentally harmful mercury or visible sensors. This eliminates the possibility of corrosion and etching, making the Ultima Switch™ an environmentally friendly product. The Ultima Switch starts when the liquid level is 50 mm and cuts off when the level has dropped to 20 mm. An eight-second delay prevents false starts. The Ultima Switch™ is suitable for 20 amp pumps with a voltage of 12V or 24V.
Electronic drain pump float switch. It automatically starts the pump when the 'level monitor' has been in contact with water for 12 seconds without interruption. 12 V, maximum load 15 A, cable length 75 cm.
Automatic bilge pump switch made of corrosion-resistant material. For fully automatic operation. Built-in microswitch completely mercury-free. Can be used with 12 and 24 V voltage.
- Max load: 12V - 18A, 24V - 8A
- 1m cable
- Width: 70mm
- Length: 117mm
Level switch with electromechanical function. Closed design ensures better reliability, as the sensor cannot become clogged with debris. Quick-release base for easy maintenance. Suitable for all electric bilge pumps up to 25 amps. Mercury-free.
- Maximum current: 25A
- Dimensions: 81x95x22mm
- Cable length: 1m
- Closed structure
- Easy to maintain
- Max 25 amps
- The Seaflo SFBS-12-04A is a reliable bilge pump level switch designed to automate water level control on your boat. With a maximum current draw of 12 A and a fully watertight construction, it ensures safe and leak-free operation.
The level switch starts the bilge pump when the water level rises to 45-55 mm and stops it when the level drops to 20-25 mm. Made of high-quality ABS plastic and metal contacts for reliable operation.
Specifications: - Voltage: 12V
- Maximum current: 12A
- Dimensions: 109.8 x 77 x 32.9 mm
- Weight: 105g
- Cable length: 1 meter (16 AWG)
- Low profile
- Easy to maintain
- Max 12A
Electronic drain pump float switch. Automatically starts the pump when the 'level monitor' has been in contact with water for 12 seconds without interruption. 24 V, maximum load 15 A, cable length 75 cm.
Kampanja
Electronic drain pump float switch. No moving parts. Works with both 12 and 24 V, maximum load 20A.
