Gas Accessories

Leak tester with connections for Ø8mm pipe connections. Includes nipples for Ø8mm gas hose, glycol liquid and mounting screws. Intended for checking the tightness of low-pressure gas systems, maximum 500mm water column. The device is installed next to the gas cylinder after the pressure reducing valve. Testing is performed by pressing the red cap. A possible leak is visible as bubbles forming in the liquid.

The CADAC Dual Power Pak is an innovative and portable gas supply that combines two gas cartridges (standard EN417 thread) to power a variety of gas appliances such as small barbecues, camping stoves and heaters. It is lightweight and easy to carry, making it ideal for trips, picnics and caravanning holidays.

Dual gas cartridge connection: Can be used with two gas cartridges (not included) with standard EN417 thread.
Stable gas pressure: Regulates gas pressure to 28 mbar, regardless of the outside temperature, ensuring consistent performance with connected devices.
Safety features: Equipped with a mechanism to prevent gas leaks. If the gas valve is opened without connecting to the appliance, the gas flow is automatically blocked.
Includes gas hose: Comes with an 85cm long gas hose with a handwheel for easy connection and disconnection.

Stainless steel. Screwed to the floor. Flange fits the bottom of the 2012 gas cylinder.

A hose that is not exposed to direct sunlight can last up to 15 years. We recommend that hoses and connections are checked annually for cracks and wear. Hose inner diameter: 6.3mm (for pre-compressed hoses according to EU camping and marine regulations)

For 8mm copper pipes.

Hose adapter for 9/10 mm gas hose. Most stoves have a CE-compliant G1/4 left-hand hose thread as a hose connection. This is the hose adapter that is suitable for it.

Hose connector product no. 4329.

Extension connector 8mm.

For connecting LPG hose to shut-off valves etc.

For LPG hose and 8 mm copper pipe.

Hose nipple Ø8mm hose to regulator M14. Can be mounted directly to low pressure regulator.

Angular model. Suitable for LPG cylinders 2000, 2006 and 2012. Outlet connection R 3/8"; V.

Suitable for P-bottles. Nipple for dia. 8mm gas hose. Our green pressure reducing valves are intended for camping use. Socket for P6, P11 and P19 bottles. Approved according to EN16129.

For direct installation on cylinders 2000, 2006 and 2012. Built-in shut-off valve. Operating pressure 3kPa (300 mm vp). Connection M14 x 1.5. Very low installation due to low profile.
Our blue pressure regulator valves are painted on the inside and approved for marine use.
Approved according to standard EN16129.

Suitable for P-bottles. Includes nipple for 8mm LPG hose. Socket for P6, P11 and P19 bottles. Our blue pressure relief valves are painted on the inside and approved for marine use. Approved according to EN16129.

For direct installation on cylinders 2000, 2006 and 2012. Built-in shut-off valve. Operating pressure 3kPa (300 mm vp). Connection M14 x 1.5. Very low installation due to low profile.
Our blue pressure regulator valves are painted on the inside and approved for marine use.
Approved according to standard EN16129.

Suitable for P-bottles. Nipple for Ø 8 mm LPG hose.

For direct installation on cylinders 2000, 2006 and 2012. Built-in shut-off valve. Operating pressure 3kPa (300 mm vp). Connection M14 x 1.5. Very flexible installation due to low profile, e.g. on standard 2kg cylinders.

Soft copper pipe for gas installations.