Heater accessories

Glow plug for flat 2D diesel heater

Glow plug strainer for flat diesel heater

Glow plug for flat 4D diesel heater

For diesel only. The fuel filter is suitable for the following heaters:
AUTOTERM Air 2D
AUTOTERM Air 4D
AUTOTERM Air 8D
AUTOTERM Air 9D

Contain:
1 x filter
2 x hose clamps
1 x connection hose

The QSTART modem is a Plug & Play device that enables the use of the Autoterm Control application on a smartphone (available on Google Play and AppStore) to control all AUTOTERM air heaters. The "Autoterm Control" application together with the QSTART modem allows you to control and monitor the Autoterm heater using the GSM/LTE network.

With the "Autoterm Control" app, you can use your phone to:
- Remote heater start/stop
- Starting the heater at a specific time
- Checking the heater status, on/off
- Temperature on the boat
- Heater settings

The QSTART modem is compatible with the following AUTOTERM air heaters:
- AUTOTERM Air 2D when connected to the control panel PU-5 / PU-27 / Comfort Control
- AUTOTERM Air 4D when connected to the control panel PU-5 / PU-27 / Comfort Control
- AUTOTERM Air 8D when connected to the control panel PU-5 / PU-27 / Comfort Control
- AUTOTERM Air 9D when connected to the control panel PU-5 / PU-27 / Comfort Control

Contain:
- 1 x QSTART modem (LTE version)
- 1 x Antenna
- 1 x Cable for QSTART modem (assy.3282)
- 1 x Quick Start Guide (user manual)

Please note that the QSTART modem uses a micro-SIM card slot and will not work if the heater is equipped with the PU-22 control panel. In order for the QSTART modem to work, the heater control panel must be replaced with a PU-5, PU-27 or Comfort Control control panel.

The thermal insulation is intended for use with exhaust pipes with a diameter of 24mm and is compatible with the air heaters: Autoterm Air 2D and Autoterm Air 4D.
Diameter: Ø 24mm
Length: 1m

5 meter long cable for control panels with 6-pin connector from Autoterm. The cable extends the distance between the control panel and the heater. Length: 5m

A complete pressure control valve with an adjustable pressure gauge that allows the desired output pressure to be set in the range of 1-6 bar. The main purpose is to ensure a stable and safe pressure level regardless of the incoming pressure. This prevents overpressure systems, which in turn prevents the activation of the safety valve and possible damage to water system components through leaks.
The valve housing is made of chrome-plated brass and is easy to maintain.

Specifications:
- Output pressure adjustment range: 1–6 bar
- Factory setting: 3 bar
- Maximum operating temperature: 80 °C
- Pressure gauge scale: 0–10 bar
- Operating medium: water
- Connector size: 1/2"

Fuel pump for Planar 2D heater.

Fuel pump for Planar 4D heater.

For diesel only. The fuel filter is suitable for the following heaters:
AUTOTERM Air 2D
AUTOTERM Air 4D
AUTOTERM Air 8D
AUTOTERM Air 9D

Contain:
1 x filter
2 x hose clamps
1 x connection hose

The Autoterm fuel tank has a capacity of 7 liters and is compatible with all Autoterm heaters.
Dimensions: 345 x 370 x 100mm.

By widening the original 24mm exhaust pipe to a 38mm exhaust pipe, a reduction in resistance is possible. This provides the flexibility to adapt the exhaust system to a longer exhaust path as required. With this connection, the maximum exhaust pipe length can be 4 meters (divided into 0.5 meters for the 24mm diameter and 3.5 meters for the 38mm diameter).
Diameter: Ø 24mm / Ø 38mm.

Exhaust pipe outlet with 24mm connection and 45 degree angle. Made of AISI316 stainless steel and supplied with gasket and fixing bolts. Stable construction, designed for use in a wide range of environments. Fits the following models:
Autoterm Air 2D
Autoterm Air 4D

External temperature sensor for Planar diesel heater from Autoterm. Cable length: 5m.

Air intake and exhaust pipe silencer from Autoterm, intended for use with the Autoterm Air 2D air heater.
Inlet/outlet diameter: Ø 60mm
Length: 410mm

Air intake and exhaust pipe silencer from Autoterm, intended for use with the Autoterm Air 4D air heater.
Inlet/outlet diameter: Ø 90mm
Length: 640mm

Fuel filter for hose.
Inner diameter: 2mm
Hose connection 6mm on each end.

Fiberglass insulation for exhaust pipes. Suitable for heaters AUTOTERM Air 2D and AUTOTERM Air 4D.

Insulation sleeve for ventilation ducts that require condensation protection and/or thermal insulation. Structures and properties: Mineral wool mat with an outer shell of PE plastic. The insulation sleeve is diffusion-protected and flexible, and does not catch fire easily.

Thickness 30mm.
Diameter: 50-60mm
Length: 3m