Detergents for canopies and fabrics

303 MARINE FABRIC GUARD is one of the best tarpaulin and fabric impregnation agents on the market.

It extends the life of boat covers, dock shelters, fabric upholstery, carpets, outdoor furniture, awning fabrics, indoor furniture, rainwear, tents, etc.
303 Marine Fabric Guard makes the treated surface water-repellent while allowing the material to breathe. It provides UV protection and repels dirt and mold growth. 303 Marine Fabric Guard restores the material's original shine and functionality.

MultiMarine canopy impregnation is a water-resistant impregnation developed for the marine environment and intended for rough textiles such as tarpaulins, sprayhoods and cushions. It repels dirt, oil and water.

Drying time is 1-4 hours depending on the degree of saturation, wind and temperature. Approximately 4-8 m² per liter is sufficient.

1. Wash the surface to be treated with MultiMarine canopy cleaner and let dry.
2. Spray evenly onto surface directly from the bottle without dilution. Treat entire surface to avoid streaking. Protect acrylic/plexiglass surfaces or similar plastics. Repeat treatment as necessary. Shake before use.

MultiMarine canopy cleaner is a water-based cleaner developed for the marine environment and intended for removing mold, moss and green algae from tarpaulins, sprayhoods and other rough textiles. The surface must be dry before application.

MultiMarine canopy cleaner is diluted in water 5-20% depending on the dirtiness of the cover. For rough cleaning, the product is applied undiluted with a spray bottle or sponge. Leave to act for 5-10 minutes and then brush with a damp sponge or brush.
Rinse thoroughly with fresh water. Shake before use, do not use on textiles that easily shed color. Frost sensitive. Supplied with spray nozzle.

Fabric impregnation agent, colorless Waterproof colorless protective agent for tarpaulins, canopies, sails, tarpaulins and other cotton and nylon fabrics. Spray evenly onto the surface to be treated undiluted directly from the bottle. Treat the entire surface for a uniform result. Note! Protect acrylic surfaces and other similar plastic window surfaces before treating with Hempel Textile Protect.

Safety data sheet:

Star brite canopy cleaner is developed to effectively remove grease, fish blood, food spills and other stains without damaging the surface.

The cleaning agent's PTEF polymers adhere to the treated area and prevent dirt from adhering and harmful UV rays. The product is suitable for both small spills and larger areas. It is simple to use: spray, leave to act and rinse. The product can be used, for example, on boats, cars and motorhomes/caravans. It is well suited for, for example, Sunbrella®, Dacron®, polyester and sailcloth.

• 500ml – bottle
• 650ml – spray
• 1 L – spray

DIRECTIONS FOR USE: For cleaning individual stains: apply directly to the stain and allow to absorb for 30 seconds. Gently rub the stain with a cloth, sponge or soft brush. Rinse thoroughly with clean, fresh water. For cleaning large areas: apply evenly to the entire area to be cleaned and allow to absorb for 30-60 seconds. Gently rub the area with a cloth, sponge or soft brush to remove the dirt. Rinse thoroughly. Stubborn stains may require multiple applications and a longer absorption time. Note: Test the product on a hidden area first to make sure it does not change the color of the fabric. Do not use the product if it leaves marks on the fabric.

ANVISNINGAR: Rengör genom att applikata direkt på äcken och let verka i 30 secunder. Använd en trasa, svamp eller mjuk borste och gnugga prudjanat. Rinse carefully with rent vatten. Clean large areas of the genome and apply it evenly over the whole surface so that it is clean and let it dry for 30 seconds until 1 minute. Gnugga prudjanat areat med en trasa, svamp eller mjuk borste så att smutsen lyfts bort innan hela areatt sköljs grundligt. Envisa äckar kan nekrama ektetada behandeling och langger behandlingstid. Note! Test the färgbeständigheten på ett visible area. Använd inte om färgbeständigheten äpää.

Washing and protecting the boat's canopy and fabrics

Instructions

Polymarine Juniorkit is a practical cleaning kit for RIBs and inflatable boats. The kit contains everything you need to clean and finish your boat. The powerful inflatable boat cleaner removes dirt, oxidation, grease, oil and fuel residues from both PVC and Hypalon materials. The inflatable boat finish is then applied to the surfaces, which protects and gives a smooth, fine surface without polishing. The product also helps prevent new soiling. The kit includes cleaning and finishing products, cloths, a nozzle and disposable gloves.

Contents:
1 × Inflatable boat cleaner, 500 ml (spray bottle)
1 × Inflatable boat finish, 250 ml
2 × polishing cloths
1 × spray nozzle
1 × pair of disposable gloves

For materials: PVC and Hypalon
Use: Cleaning and protection of RIB/inflatable boats

BRAVA Cleaner is an effective cleaner and color restorer for inflatable boats that have been damaged by the sun, dirt and salt water. The product restores the boat's original color and shine and is suitable for all types of rubber and vinyl surfaces. Perfect for refreshing surfaces that have lost their shine and color.

• Restores color and shine to sun-faded and aged surfaces.
• An effective cleaner that removes salt and other dirt.
• Versatile: Suitable for all types of rubber and vinyl.

Use:

Spray directly onto the surface to be treated.

Let it act for a few seconds.

If necessary, scrub with a brush or sponge.

Rinse thoroughly with water before the product dries on the surface.

For best results, finish by applying a protective wax for long-lasting protection.

Specifications

Capacity: 0.75 l

Appearance: Liquid

Color: Neon green-yellow

pH value: 13 (+/- 0.5)

Density: 1 kg/l (+/- 0.1)

BRAVA Euromeci is an effective cleaner for inflatable boats, developed with plant-based surfactants for gentle and effective cleaning of all types of rubber materials. Perfect for removing dirt, salt and other contaminants from inflatable boats and RIBs.

• Effective and gentle: Cleans without damaging the material.

• Plant-based surfactants: A more environmentally friendly alternative to boat maintenance.

• Wide application: Suitable for all kinds of rubber materials.

Use:

1. Spray directly onto the surface to be cleaned.

2. Wipe with a damp sponge.

3. Leave on for a few minutes if necessary.

4. Rinse thoroughly with clean water.

For best protection, finish with wax to protect the surface.

PFAS-free Iosso Seam Sealer is an effective solution for preventing seam leaks.

It is particularly suitable for cotton, cotton blends, polyester and synthetic woven fabrics without affecting the appearance or feel of the fabric.

A good choice for boat covers, awnings, tents, backpacks and other textiles exposed to moisture. The new silicone-free formula also contains UV protection for even greater durability.

Features:

• PFAS-free and environmentally friendly

• Protects against seam leaks without hardening the fabric or changing its appearance

• Suitable for a wide range of textiles

• One bottle is enough for about 15 meters of seam

• Does not change the appearance of the seam or fabric

• Note: Water repellency may vary on vinyl coated and laminated fabrics depending on the seam construction.

Instructions for use:

Volume: 118ml

303 Marine Clear Vinyl Protective Cleaner is the best cleaner and protector for boat canopy plastic windows and other plastic surfaces. It cleans effectively without damaging the surface, restores the plastic's properties and protects against yellowing and embrittlement. The product also contains strong UV protection. The best choice for all clear vinyl surfaces, such as Strataglass and Eisenglass. Also suitable for other vinyl, plastic and rubber, but is not as powerful and protective as 303 Aerospace Protectant.

303 Mold & Mildew Cleaner + Blocker is an effective cleaner for removing mold and mildew stains.

As a boat owner, you’re constantly dealing with mold damage caused by moisture, which is why it’s a good idea to keep this product on hand. However, it’s not just for boat interiors – you can use it anywhere in your home where mold spots may occur.

The product can be used on any surface that is at risk of mold growth. The most common applications are vinyl boat cushions, bimini tops and other vinyl, plastic and fabric surfaces that are exposed to moisture. 303 Mold & Mildew Cleaner + Blocker is also suitable for damp areas of the home, such as bathrooms, where mold and mildew stains are a common problem. The product can be sprayed on shower walls, countertops and around windows to prevent mold growth. It is also suitable for outdoor furniture and other fabrics that are exposed to moisture.

Quickly removes mold and mildew stains:

Prevents the recurrence of mold and mildew spots
Contains no bleach, leaves a fresh scent
Suitable for all water-safe surfaces, including vinyl and fabrics
Does not remove existing impregnation or UV protection

Instructions for use:

When you own a boat, you’re constantly battling mold and mildew caused by moisture. That’s why it’s a good idea to always keep a bottle of 303 Mold & Mildew Cleaner + Blocker on hand to help protect your boat’s interior from moisture damage.

This effective product can also be used at home on any surface that may be prone to mold or mildew spots, making it ideal for boat owners and those living in humid climates.

303 Mold & Mildew Cleaner + Blocker can be used in any area where mold is at risk. The most popular uses are boat cushions, bimini tops, and other vinyl, plastic, and fabric surfaces that are exposed to moisture. This product can also be used at home, as it is suitable for all surfaces that are water-resistant. For example, preventing mold and mildew stains is a common concern in bathrooms. The product can be sprayed directly onto surfaces such as shower walls, countertops, or around windows to prevent mold from spreading. It also works as a protector for outdoor furniture, as it is safe to use on fabrics.

• Removes mold and mildew stains instantly
• Prevents the re-formation of mold and mildew spots
• Contains no bleach and leaves a fresh scent
• Suitable for all waterproof surfaces, such as vinyl and fabrics
• Does not remove existing protective treatment or UV protection

Instructions for use:

Shake the bottle well before use. Test the product on an inconspicuous area first. Spray the cleaner directly onto the stain and scrub the surface with a microfiber cloth or soft brush. Leave the product on for two minutes and then wipe with a clean, damp microfiber cloth. If the stain does not disappear after the first treatment, repeat the process if necessary. In most cases, the effect is visible within a few minutes. What’s more, this product helps prevent new mold spots from forming, so you don’t have to re-treat as often!

Biocool Wash My Laundry – effective deodorization at just 30 degrees

Perfect for use with:

The cause of unpleasant odors and a dirty washing machine

When you suffer from athlete's foot or other fungal infections

Environmentally friendly alternative

Suitable for allergy sufferers and those with sensitive skin

Gentle on delicate fabrics

Instructions for use and dosage

Vinyl cleaner is formulated to remove tough dirt, greasy marks and slime.

Applications include car, RV and boat upholstery, interior/exterior moldings, rain gear and outdoor cushions and canopies. The powerful formula is tough on dirt, but is not harmful to vinyl. The vinyl cleaner does not contain acids or corrosive substances. Suitable for vinyl, plastic, rubber and leather.

DIRECTIONS FOR USE: Spray the cleaner onto the surface to be cleaned. Spread the cleaner evenly by rubbing with a cloth, soft brush or sponge in a circular motion. Allow the cleaner to work on the surface for 15-30 seconds before wiping or rinsing. Stubborn stains may require a second cleaning, soaking for about a minute and gently scrubbing, then rinsing or wiping.

NOTE: Test sensitive surfaces (leather, decals, waterline tape, painted areas) and areas where product may drip on a small, inconspicuous area before use. Do not use if any adverse effects occur. Star brite will not be liable for any damages up to the purchase price of this product.

Zipper lubricant. Suitable for both metal and plastic zippers. Prevents rust and sticking, and removes and protects against salt water.