Dinghie glues and patch kits

A complete set for gluing patches on inflatable boats made of Hypalon or Neoprene.

The package includes:

• Adeprene: 125ml
• Activator: 10ml
• Emery paper
• Small brush
• Round 10cm patch made of Neoprene-Hypalon.

PVC or Hypalon – How do I know what material my boat is made of?

• Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
• Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.

Two-component adhesive for PVC inflatable boats

Special glue used for repairing rubber boats. Also used for larger repairs and in situations where durability is needed.

Instructions: Mix the glue and hardener in the correct ratio. Apply a thin layer of the mixture to both the repair patch and the boat. Wait about 10 minutes and apply a second layer to both surfaces. Wait about 10-15 minutes. Now place the patch in the desired location and press. Full strength is achieved after about 24 hours.

The package also includes a brush, a 10 cm diameter light gray repair patch, and glue.

PVC or Hypalon – How do I know what material my boat is made of?

• Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
• Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.

Suitable for repairing PVC inflatable boats, resistant to seawater and hot conditions.

PVC or Hypalon – How do I know what material my boat is made of?

• Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
• Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.

Inflatable boat patch kit. Includes two 25x15cm PVC pieces (black + light grey). Also includes a valve tightening tool. Glue must be purchased separately.

The package includes:

• 1 x Valve tightening tool
• 1 x Black PVC piece 25 x 15 cm
• 1 x Light grey PVC piece 25 x 15 cm

PVC or Hypalon – How do I know what material my boat is made of?

• Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
• Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.

Inflatable boat patch kit. Includes two 25x15cm PVC pieces (dark blue + light gray). Also includes a valve tightening tool. Glue must be purchased separately.

Package contents:

• 1 x Valve tightening tool
• 1 x Dark blue PVC piece 25 x 15 cm
• 1 x Light grey PVC piece 25 x 15 cm

PVC or Hypalon – How do I know what material my boat is made of?

• Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
• Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.

Inflatable boat patch kit. Includes two 25x15cm PVC pieces (white + light grey). Also includes a valve tightening tool.

Package contents:

• 1 x Valve tightening tool
• 1 x White PVC piece 25 x 15 cm
• 1 x Light grey PVC piece 25 x 15 cm

PVC or Hypalon – How do I know what material my boat is made of?

• Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
• Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.

Polymarine reinforced PVC sheet in A4 size is a durable repair material that has been specially developed for repairing inflatable boats, dinghies and RIBs. It is made of PVC-coated fabric. The material provides a strong and reliable repair for holes, tears and wear, and is easy to work with in combination with a suitable PVC adhesive. The perfect spare material on the boat or in the workshop for quick and durable repairs.

Polymarine PVC Glue is a strong polyurethane-based adhesive that bonds excellently to both soft and hard PVC, as well as nylon and polyurethane fabrics. It has been specially developed for inflatable boat repairs and works with materials such as Zodiac/Bombard Dynalon and Strongon and Narwhal/Valiant Hypertex . The glue is easy to use as a single-component adhesive for quick, temporary repairs. It bonds in just 10-15 minutes and cures fully in 48 hours. For larger or permanent repairs, Polymarine’s two-component adhesive is recommended.

Polymarine's two-component PVC glue is a complete repair kit for PVC-based inflatable boats, such as RIBs, SIBs, dinghies and SUP boards. The kit includes professional-grade two-component glue, two-color reinforced PVC fabric and the necessary supplies to make a durable and beautiful repair. With primer, hardener, brush, stick and clear instructions, you are ready to repair your boat quickly and permanently. A compact and handy kit that is perfect for taking with you.

Contents:
1 × 125 ml Polymarine 3062 PVC adhesive (part A)
1 × 5 ml hardener (part B)
1 × 10 ml 2903 primer and cleaner
1 × PVC fabric reinforced, light grey (A6)
1 × PVC fabric reinforced, white (A6)
1 × brush
1 × stick
1 × pair of disposable gloves

Area of ??application: PVC inflatable inflatables (RIB, SIB, tender, SUP)
Result: Permanent and professional repair

Polymarine's 2-component adhesive Hypalon is a complete repair kit for Hypalon-based inflatable boats, RIBs and even neoprene materials such as wetsuits. The kit includes professional 2-component adhesive, reinforced Hypalon fabric in two colors and all the necessary accessories for a durable and safe repair. With primer, hardener, sandpaper, brush and clear instructions, you can quickly and easily make a high-quality repair. A compact kit that is perfect to always have on your boat.

Contents:
1 × 125 ml Polymarine 2909 Hypalon adhesive (part A)
1 × 5 ml hardener (part B)
1 × 10 ml 2903 primer and cleaner
1 × Hypalon fabric reinforced, medium grey (A6)
1 × Hypalon fabric reinforced, white (A6)
1 × brush
1 × pipe stick
2 × sandpaper
1 × pair of disposable gloves

Use: Hypalon, RIB and neoprene
Result: Permanent and professional repair

Fabric for PVC inflatable boats.

PVC or Hypalon – How do I know what material my boat is made of?

• Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
• Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.

1-component Hypalon adhesive. Suitable for bonding inflatable boats and other inflatables made of Hypalon material.

PVC or Hypalon – How do I know what material my boat is made of?

• Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
• Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.

2-component adhesive for hypalon-made inflatable boats.

PVC or Hypalon – How do I know what material my boat is made of?

• Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
• Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.

Quicksilver's high-quality PVC fabric is ideal for durable repairs to inflatable boats and other PVC surfaces. The 0.7 mm thick, white patch fabric is a flexible, UV-resistant material that adheres well with the right adhesive.

PVC or Hypalon – How do I know what material my boat is made of?

• Back of the fabric: PVC fabric has the same color on both sides. Hypalon fabric has different colors on the front and back. The back is dark gray or black.
• Sandpaper test: Sand the fabric with sandpaper. Hypalon material becomes dull and dull, leaving a dusty, velvety surface. With PVC, sandpaper leaves scratches and the surface remains shiny, with no discoloration at the sanding point.