Marine Amplifiers
An amplifier takes a weak signal from a source and boosts it to a suitable level. It can also control the tone, balance, and other audio settings to make the sound sound the way you want it to.Product groups
Marine Amplifiers group products
/fusion-apollo-vahvistin-4-kanavainen-1200w-067c0995c1bd2e.webp)
OUTLET
Apollo: 4-channel amplifier
The 4-channel amplifier, with a power of 150 watts RMS per channel, is sufficient for up to four pairs of speakers or two pairs of speakers and one subwoofer. The amplifier has power mode adapters that allow you to easily increase power by bridging the channels. This makes it a versatile and efficient solution, ideal for different volume levels and speaker numbers.
High-quality audio made easy
Powerful, easy-to-install amplifiers work with a compatible Fusion stereo system. You can choose a monoblock, multi-channel or zone amplifier to suit your needs.
Power and efficiency
Apollo amplifiers are designed to deliver efficiency and reduce battery drain. The monoblock amplifier delivers 650 watts RMS power and the 4/6/8-channel amplifiers deliver 150 watts RMS per channel.
Easy-tune function
Easy Tune automatically adjusts sound settings so you always get high-quality sound without manual adjustments.
Less distortion
The amplifiers are designed to produce minimal distortion and noise, so the sound quality remains top-notch even at high volumes.
Indicator lights
The indicator lights immediately show if the amplifier has electrical problems, short circuits or temperature issues, making it easy to spot problems quickly.
Staging
The amplifiers come with brackets that make installation on the boat quick and easy.
Startup protection
The amplifier has start-up protection to prevent possible damage from overheating.
Protectively coated circuit board
The circuit board has a special coating that protects it from the marine climate and increases the amplifier's durability.
2 ohm stability
Each channel supports two speakers, increasing installation options and allowing for more flexible deployment.
Fusion Teru Marine™ design
The amplifiers are designed to last season after season, with protection against salt, fog, heat, vibration and UV, making them an excellent choice for demanding seawater conditions.
- Channels: 4
- Physical Dimensions (Height): 180 mm
- Physical Dimensions (Width): 235 mm
- Physical Dimensions (Depth): 45 mm
- Weight: 2.2 kg
- Water and dust rating: IPX2
- Operating temperature: 0–50°C
- Warranty: 3 years
Sound:
- Amplifier class: Class D
- Rated continuous (RMS) power (14.4V input @ 4 Ohm < 1% THD): 150W x 4
- Rated continuous (RMS) power (14.4V input @ 2 Ohm < 1% THD): 290W x 4
- Frequency response (+0, -1dB): 20 Hz - 20 kHz
- Input Sensitivity @ RCA Inputs: 1.3 V RMS
- Input voltage range @ RCA inputs: 1.3 V RMS
- Input impedance: 22 k?
- Power consumption (standby): < 5 mA, input 14.4 V
- Current consumption (idle): < 1.15 A, input 14.4 V
- Current consumption (max.): 53 A
- Fuse rating: 85A electrical fuse (no need to replace)
- Minimum copper power/earth-earth cable size: Bussmann™ BK/AMI-030 fast 30 A
- Ignition protection (SAE J1171): Yes
Protection circuits:
- Blocking voltage
- Input under/overvoltage
- Overheating
- Output short circuit
In the package:
- 4-channel Apollo amplifier
- One 4-channel Apollo amplifier
- One rack
- One power connector
- Two speaker terminals and power mode adapters
- Four size 8 flat head screws
- Four size 8 pan head screws (for the rack)
- Four screw caps
- Mounting model
- Installation instructions
- Important safety and product information
/212768a6f7a1ebf42.jpg)
/fusion-apollo-vahvistin-6-kanavainen-1800w-067c09e0d6f68e.webp)
Campaign
Stock Clearance!
Apollo: 6-channel amplifier
The 6-channel amplifier, with 150 watts RMS per channel, is enough for up to six pairs of speakers or four pairs of speakers and a subwoofer. It features power mode adapters for easy bridging to increase power, making it a versatile and efficient solution that is ideal for a variety of volume levels and speaker configurations.
High-quality audio made easy
Powerful, easy-to-install amplifiers work with a compatible Fusion stereo system. You can choose a monoblock, multi-channel or zone amplifier to suit your needs.
Power and efficiency
Apollo amplifiers are designed to deliver efficiency and reduce battery drain. The monoblock amplifier delivers 650 watts RMS power and the 4/6/8-channel amplifiers deliver 150 watts RMS per channel.
Easy tune function
Easy Tune automatically adjusts sound settings so you always get high-quality sound without manual adjustments.
Less distortion
The amplifiers are designed to produce minimal distortion and noise, so the sound quality remains top-notch even at high volumes.
Indicator lights
The indicator lights immediately show if the amplifier has electrical problems, short circuits or temperature issues, making it easy to spot problems quickly.
Staging
The amplifiers come with brackets that make installation on the boat quick and easy.
Startup protection
The amplifier has start-up protection to prevent possible damage from overheating.
Protectively coated circuit board
The circuit board has a special coating that protects it from the marine climate and increases the amplifier's durability.
2 ohm stability
Each channel supports two speakers, increasing installation options and allowing for more flexible deployment.
Fusion True-Marine™ design
The amplifiers are designed to last season after season, with protection against salt, fog, heat, vibration and UV, making them an excellent choice for demanding seawater conditions.
- Channels: 6
- Physical Dimensions (Height): 180 mm
- Physical Dimensions (Width): 297 mm
- Physical Dimensions (Depth): 45 mm
- Weight: 2.7 kg
- Water and dust rating: IPX2
- Operating temperature: 0–50°C
- Warranty: 3 years
Sound:
- Amplifier class: Class D
- Rated continuous (RMS) power (14.4V input @ 4 Ohm < 1% THD): 150W x 6
- Rated continuous (RMS) power (14.4V input @ 2 Ohm < 1% THD): 290W x 6
- Frequency response (+0, -1dB): 20 Hz - 20 kHz
- Input Sensitivity @ RCA Inputs: 1.3 V RMS
- Input voltage range @ RCA inputs: 1.3 V RMS
- Input impedance: 22
- Power consumption (standby): < 5 mA, input 14.4 V
- Current consumption (idle): < 1.32 A, input 14.4 V
- Current consumption (max.): 78 A
- Fuse rating: 125A electrical fuse (no need to replace)
- Minimum copper power/earth-earth cable size: Bussmann™ BK/AMI-030 fast 30 A
- Ignition protection (SAE J1171): Yes
Protection circuits:
- Blocking voltage
- Input under/overvoltage
- Overheating
- Output short circuit
In the package:
- 6-channel Apollo amplifier
- One rack
- One power connector
- Three speaker terminals and power mode adapters
- Four size 8 flat head screws
- Four size 8 pan head screws (for the rack)
- Four screw caps
- Mounting model
- Installation instructions
- Important safety and product information
/clarion_xc2410_vahvistin_4_kanavainen-0678a6421f09fb.picture_manager_678a6325131b2.jpg)
Clarion 4-channel amplifier, model XC2410
Clarion amplifiers feature strong resistance to magnetic interference, as well as high-quality connectors that minimize contact resistance. The amplifier is made with corrosion-resistant connectors and aluminum heat sinks to withstand the harsh conditions of boating. The MOS-FET (Metal Oxide Semiconductor Field Effect Transistor) power supply allows for a more compact and efficient power supply, which reduces distortion and eliminates on/off switching noise. This means you get crystal-clear sound at all volumes.
Specifications:
- Maximum power: 400W
- Continuous power: 50W x 4 at 4 ohms
- Continuous power: 75W x 4 at 2 ohms
- Continuous power: 150W x 2 at 4 ohms (bridged)
- Adjustable 12 dB/octave High Pass Crossover: Variable 15 - 250Hz (FR/RR)
- MOS-FET power supply
- Corrosion-resistant nickel-plated RCA, power and speaker tubes
- RCA and speaker tubes
Dimensions:
- Width: 182mm
- Height: 39mm
- Depth: 82mm
- 4-channel
- 400W
- 182x39x82mm
/197868a82ede8cc34.jpg)
